Abstract:Aqueous zinc (Zn)-ion batteries (AZIBs) have been paid attention to as safe, economical, and high-energy-density storages through multiple electron transfer. Although conventional alkaline solution-based AZIBs are primary batteries, recent studies demonstrated the reversible Zn 2+ deposition and stripping processes enabled in mildly acidic solutions. It promises the development of rechargeable AZIBs and viable applications for energy storage systems (ESSs). However, metallic Zn employed as the negative electrode has suffered from severe corrosion and precipitation of electrolyte salts in this low pH condition. The Zn electrode undergoes a hydrogen evolution reaction (HER) as Zn 2+ is dissolved from the Zn surface. The corrosion leads to a pH rise, precipitating electrolyte salt as zinc hydroxide forms. For example, hexagonal plates of zinc hydroxide sulfate hydrate (Zn 4 SO 4 (OH) 6 ∙xH 2 O, indicated as ZHS) grew on the Zn electrode in 1 M ZnSO 4 solution when pH approached ~5.4. The insulating and randomly oriented ZHS increased the surface resistance and caused the non-uniform Zn deposition. These challenges are mitigated by adding organic acid to the 1 M ZnSO 4 solution. As the HER raised pH, the acid was promptly deprotonated, then coordinated with Zn 2+ . This process caused the thin film formation consisting of three-dimensional zinc glutarate. The zinc glutarate protected the Zn electrode and impeded the electrode corrosion and the ZHS precipitation. We demonstrated a uniform Zn plating and stripping process with 10 mM of organic acid in contrast with dendritic and dead Zn growth in the absence of the additive. Galvanostatic tests of symmetric Zn cells revealed over 1000 h cycles with the additives at a current density of 1 mA cm -2 and a limited capacity of 1 mAh cm -2 . In contrast, the Zn cells with the additive-free electrolyte solution exhibited 15 times lower cyclability as micron-scale ZHS plates covered the electrode surface. Our strategy using the cheap additives is feasible to use grid-scale ESSs and shows significantly improved cycling performances. I will present details of Zn surface reactions using organic acid additive and corresponding electrochemical performances in this presentation.

Effect of additives on zinc electrodes in alkaline battery systems

Electrolyte Additive Strategies for Safe and High-Performance Aqueous Zinc-Ion Batteries: A Mini-Review

Effects of Surface Conditions of Zinc and Additives on Electrodeposition of Zinc from Zincate Solutions

Long-Life and Highly Utilized Zinc Anode for Aqueous Batteries Enabled by Electrolyte Additives with Synergistic Effects

Recent Progress in Electrolyte Additives for Highly Reversible Zinc Anodes in Aqueous Zinc Batteries

Research progress on the electrolyte additives in rechargeable alkaline zinc battery systems

The effects of anode additives towards suppressing dendrite growth and hydrogen gas evolution reaction in Zn-air secondary batteries

Study of Quaternary Ammonium Additives towards High-Rate Zinc Deposition and Dissolution Cycling for Application in Zinc-Based Rechargeable Batteries

Aqueous electrolyte additives for zinc-ion batteries

Study of the performance of secondary alkaline pasted zinc electrodes

Regulation of Solvation Structure and Electrode Interface by Succinic Acid Additive for Highly Stable Aqueous Zn Batteries

Enhancing the Cycle Life of a Zinc–Air Battery by Means of Electrolyte Additives and Zinc Surface Protection

From electrolyte to electrode interface: Understanding impacts of electrolyte additives for aqueous zinc-ion batteries

Organic additives in alkaline electrolyte to improve cycling life of aqueous Zn–Ni batteries

A Versatile Cation Additive Enabled Highly Reversible Zinc Metal Anode

Stabilizing Metallic Zn Electrode Using Organic Acid Additives in Aqueous Zinc-Ion Batteries

Alleviation of Dendrite Formation on Zinc Anodes via Electrolyte Additives

Ether-Water Co-Solvent Electrolytes Enhanced Vanadium Oxide Cathode Cyclic Behaviors for Zinc Batteries

Stabilizing Zinc Electrodes with a Vanillin Additive in Mild Aqueous Electrolytes

Enhancing Secondary Alkaline Battery Performance: Synthesis and Electrochemical Characterization of Zn Anodes, Based on ZnO@C Core‐Shell Nanoparticles

Engineering Electrolyte Additives for Stable Zinc-Based Aqueous Batteries: Insights and Prospects