Long-Life and Highly Utilized Zinc Anode for Aqueous Batteries Enabled by Electrolyte Additives with Synergistic Effects

Bin Liu,Tian Wu,Fuyuan Ma,Cheng Zhong,Wenbin Hu

DOI: https://doi.org/10.1021/acsami.2c00949

2022-04-12

Abstract:After decades of development, zinc-based batteries with the advantages of high energy density, low cost, and environmental benignity have been considered as a promising battery system in the application of energy storage. However, the poor cycle performance of zinc anode strongly restricts the cycle life of zinc-based batteries and thus limits its large-scale application. Electrolyte additives have been proven to be one of the most straightforward strategies in improving the stability of zinc anode during cycles, while the options of additives are still limited. This work is based on the in-depth investigation of the electrochemical behavior of both the organic additives and the zinc species in the electrolyte. The modification effects of poly(vinyl alcohol) (PVA) and vanillin as two typical additives from the electroplating industry in both the zinc plating and zinc anode are systematically studied. It is revealed that PVA could increase the utilization and rate performance of the anode, while greatly promoting the corrosion and shape change of the zinc anode. On the contrary, the existence of vanillin could maintain the structure of the anode during cycles, while the rate performance of the battery is hindered. With the coaddition of the PVA and vanillin, the zinc anode shows superior performance in cycle life, rate performance, active material utilization, and discharge energy retention. These findings provide insight for the enrichment of electrolyte additives in zinc-based batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c00949.Table of weight percentages of different elements acquired from EDS spectra and figures SEM image and relative element mapping of Zn, Bi, F, and C of the front side of the anode of B–Zn–V (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology

What problem does this paper attempt to address?

The paper aims to address the issue of poor cycling performance of zinc anodes in zinc-based batteries. Specifically, zinc-based batteries have the advantages of high energy density, low cost, and environmental friendliness, but their zinc anodes perform poorly during cycling, severely limiting the overall lifespan and large-scale application of the batteries. To improve this situation, the paper explores the effects of electrolyte additives commonly used in the electroplating industry (polyvinyl alcohol PVA and vanillin) on zinc deposition and dissolution behavior, investigating how these additives synergistically enhance the stability and utilization of zinc anodes.

The study found that:
1. **PVA** can increase the utilization rate and rate performance of zinc anodes but promotes corrosion and shape changes.
2. **Vanillin** can maintain the structural stability of the anode but reduces the rate performance of the battery.
3. **The co-addition of PVA and vanillin** can significantly improve the performance of zinc anodes in terms of cycling life, rate performance, and active material utilization.

By systematically studying the mechanisms of these additives, the paper provides new insights into the selection of electrolyte additives for zinc-based batteries and lays the foundation for further research.