Abstract:Owing to the advantages of large specific capacity, high work potential, rich reserves, and low price, man. ganese dioxide (MnO2) material has become the most potential material for the cathode in aqueous zinc batteries (AZBs). However, it still has problems with poor structural stability and complex electrochemical storage mecha. nism. Herein, a kind of Ti3C2Tx/MnO2 composite material based on bract. liked structural of MnO2 deposited on Ti3C2Tx was prepared by a two. step method, and the structure, composition, and morphology of the composite were characterized by X. ray powder diffraction (XRD), X. ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and high. resolution transmission electron microscopy (HRTEM). The zinc storage performance of Ti3C2Tx/MnO2 cathode were evaluated in different aqueous electrolyte (2 mol.L-1 ZnSO4, 2 mol.L-1 ZnSO4+ 0.1 mol.L-1 MnSO4, 30 mol.L-1 tetraethylammonium triflate (TEAOTf)+1 mol.L-1 ZnCF3SO3 (ZnOTf), 3 mol.L-1 ZnOTf), respectively. As a result, Ti3C2Tx/MnO2 cathode displayed two obvious discharge platforms in 2 mol.L-1 ZnSO4 and 2 mol.L-1 ZnSO4+0.1 mol.L-1 MnSO4 solution, which is attributed to the co. insertion of H+ and Zn2+ due to the weak acidic electrolyte. The initial platform region at 1.0 V occurred in the first step is the insertion of H+, and the subse. quent reaction is the insertion of Zn2+ into Ti3C2Tx/MnO2 electrode. However, in the neutral of 3 mol.L-1 ZnOTf and 30 mol.L-1 TEAOTf+1 mol.L-1 ZnOTf electrolyte, the insertion of H+ into the Ti3C2Tx/MnO2 cathode hardly appears, and the obtained discharge capacity may mainly come from the intercalation of Zn2+. Moreover, the utilization of ultra-high concentration electrolyte could not only improve the reversibility of Ti3C2Tx/MnO2 electrodematerial but also effectively inhibit the dissolution of electrode material in the cycling process (78.2% capacity retention after 100 cycles at 0.2 A.g(-1)).

Preparation of Ce(OH)3/calcium 3 /calcium Zincate Composite Materials and Performance in Zinc-Nickel Batteries

MnO2@CeO2 composite cathode for aqueous zinc-ion batteries: enhanced electrical conductivity and stability through Mn–O–Ce bonds

Effects of Surface Coating on the Electrochemical Properties of Amorphous CeMg12 Composite

Effects of Surface Modification on the Electrode Behavior of Amorphous CeMg12 Alloys

Electrochemical Performance of Ti<sub>3</sub>C<sub>2</sub>T<i><sub>x</sub></i>/MnO<sub>2</sub> Cathode in Aqueous Zinc Ion Batteries

Study on the preparation and performance of Cr2O3-MnOx nanocomposite material as cathode for aqueous zinc-ion batteries

Modulating the Structure of Interlayer/Layer Matrix on δ‐MnO2 via Cerium Doping‐Engineering toward High‐Performance Aqueous Zinc Ion Batteries

Study of the performance of secondary alkaline pasted zinc electrodes

Achieving dendrite-free and long cyclic stability of zinc anode via CeO 2 doped PEO interface modification

Enhanced Stability and Narrowed D‐Band Gap of Ce‐Doped Co3O4for Rechargeable Aqueous Zn‐Air Battery

Optimizing the electrolyte salt of aqueous zinc-ion batteries based on a high-performance calcium vanadate hydrate cathode material

Ternary Zn3V3O8 superstructure and synergistic modification of separator promote high performance and stable zinc ion battery

High mass loading CaV4O9 microflowers with amorphous phase transformation as cathode for aqueous zinc-ion battery

Preparation of CeO2-coated Li1.2Mn0.54Co0.13Ni0.13O2 as cathode materials for Lithium Ion Batteries

High-Capacity Calcium Vanadate Composite with Long-Term Cyclability as a Cathode Material for Aqueous Zinc-Ion Batteries

An Electrochemically Prepared Mixed Phase of Cobalt Hydroxide/Oxyhydroxide as a Cathode for Aqueous Zinc Ion Batteries

Synthesis and Optimization of ZnMn 2 O 4 Cathode Material for Zinc-Ion Battery by Citric Acid Sol-Gel Method

Enhanced Zinc Ions Storage Performance of Mn2O3/Mn3O4/NiMn2O4 Composite Cathode Material Synthesized by a Thermal Decomposition Method

Robust Strategy for Crafting Li5cr7ti6o25@Ceo2 Composites As High-Performance Anode Material for Lithium-Ion Battery

Enhancing electrochemical performance in aqueous rechargeable Zn-ion batteries through bimetallic oxides of manganese and cobalt as electrode

Ce ions intercalation and structural engineering assist MOF-derived porous V 2 O 5 with enhanced Zn 2+ diffusion kinetics for high-rate and ultra-stable aqueous zinc-ion batteries