Abstract:This study offers an efficient method for commercial-size proton exchange membrane fuel cell (PEMFC) stack performance evaluation to improve designing of fuel cell and maximize power density in PEMFC stack. The flow distribution in the manifold of the stack is critical to the energy conversion of the assembled unit cells in series due to the typical short-board effect. Most existing works studying on the flow distribution focus on small fuel cell stack and does not establish a clear relationship to performance, which are not able to thoroughly guide commercial-size PEMFC stack design and development. In the present study, an effective method combining computational fluid dynamics (CFD) model and empirical model is proposed to evaluate the performance of commercial-size stack considering air flow distribution in the manifold. Firstly, the air flow distribution in the manifold is predicted by a CFD model. A performance evaluation empirical model is developed by a series of experiments to evaluate the effects of flow maldistribution on the performance of PEMFC stack. Then, the predicted flow distribution and performance are respectively validated by a novel experimental setup. Finally, the effects of stack configuration, cell number, and current density on flow distribution and performance of PEMFC stacks are discussed. The results show that U-type configuration promotes more uniform voltage among unit cells than Z-type. The voltage unevenness of unit cells caused by flow maldistribution climbs dramatically as the cell number and current density increase. The methodology developed is beneficial to the energy management and the efficiency improvement of commercial-size PEMFC stack.

3-D Flow Field Analysis and Numerical Simulation in Fuel Cell Air Inlet Manifold

Numerical computed methods for intake manifolds in gasoline engine

Flow Manifold Optimization for a Uniform Velocity Distribution in a Laminated Microreactor with Micro‐Pin‐Fin Arrays

Numerical Modeling of Manifold Design and Flow Uniformity Analysis of an External Manifold Solid Oxide Fuel Cell Stack

Numerical Simulation of Flow Distribution for External Manifold Design in Solid Oxide Fuel Cell Stack

Integrated Flow Field Calculation of Combustor and Inlet in Variable Flow Ducted Rocket

Investigation on Flow Distribution in an External Manifold SOFC Stack by Computational Fluid Dynamics Technique

Analysis and improvement of flow distribution in manifold for proton exchange membrane fuel cell stacks

Cfd Analysis of A Novel Modular Manifold with Multi-Stage Channels for Uniform Air Distribution in A Fuel Cell Stack

CFD Simulation Calculation of Inlet Manifold Modification Design

Flow Distribution Analysis In The Sofc Stack Using Cfd Technique

A Novel Flow Field Design for the Effective Transportation in Polymer Based Fuel Cells

A CFD‐based manifold design methodology for large‐scale PEM fuel cell stacks

Optimization of Entrance Geometry and Analysis of Fluid Distribution in Manifold for High-Power Proton Exchange Membrane Fuel Cell Stacks

Numerical Study of Porous Flow Field Designs for Proton Exchange Membrane Fuel Cells

Numerical Analysis on the Effects of Manifold Design on Flow Uniformity in a Large Proton Exchange Membrane Fuel Cell Stack

Analytical and numerical investigation of flow distribution in PEMFC stacks

Manifold geometry optimization and flow distribution analysis in commercial-scale proton exchange membrane fuel cell stacks

Effect of Parameters of Intake Manifold Structure on Characteristics of Intake Flow Based on Simulation

Discrete approach for flow field designs of parallel channel configurations in fuel cells

Entrance Effects on the Flow Distribution in Manifold of Commercial-Size Proton Exchange Membrane Fuel Cell Stacks