Abstract:It has been generally acknowledged that the configuration of a gas distributor has significant impact on fluid dynamics and mixing in shallow bubble column reactors.This study employs computational fluid dynamics (CFD)-based models to simulate transient gas-liquid flow in a large-scale shallow cylindrical bubble column of 800mm in diameter at the superficial gas velocity of 0.1m/s.An Eulerian-Eulerian two-fluid model along with the stand k-e turbulence model is adopted to simulate flow generated by gas sparged through five different multiple-pipe gas distributors which the four pipes are uniformly mounted at different distribution rings with ring to bubble column diameter ratios of 0.3,0.4,0.5,0.6 and 0.7.Multiple-Size-Group (MUSIG) model is also employed in the simulation to account for bubble break-up and coalescence.The effects of the diameter of distribution rings for allocating gas sparging pipes in the gas distributor on hydrodynamics,gas hold-up,mixing,turbulence and bubble size is systematically investigated.The simulation results clearly show that gas hold-up and mixing characteristics in the bubble column are affected by the ring to bubble column diameter ratio.It is demonstrated that the mixing time and overall gas hold-up increase with the increase of ring to bubble column diameter ratio initially but decrease with further increasing such ratio.It is found from the simulation that the optimum ring to bubble column diameter ratio is about 0.4 for the best gas hold-up distribution and such a ratio of 0.5 corresponds the longest mixing time.The CFD modelling results also reveal that the flow pattern inside the bubble column is dominated by single circulation when ring to bubble column diameter ratio is smaller than 0.5 while double-circulation flow appears when the ratio is larger than 0.5,thus impairing the mixing in the bubble column.A comparison has been presented between the simulation and the experimental data.

Effect of Gas Distribution in Inlet Pipe on Gas Distribution in Column

Impact of gas distributor configuration on hydrodynamics in bubble column with pipe internals

Application of CFD Simulation for Optimisation of the Multi-Pipe Gas Distributors in a Large-Scale Shallow Bubble Column

CFD simulation of effects of the configuration of gas distributors on gas–liquid flow and mixing in a bubble column

Study on bubble size distribution and local gas holdup in bubble column

Hydrodynamics in Bubble Columns with Pin-Fin Tube Internals

Experimental Investigation of Flow Development in Large-Scale Bubble Columns in the Churn-Turbulent Regime

Numerical Simulations Of Fluid Dynamics And Mixing In A Large Shallow Bubble Column: Effects Of The Sparging Pipe Allocations For Multiple-Pipe Gas Distributors

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

CFD simulation of bubble column with vertical bundle internals

Influence of Short-Draft Tube on Fluid Dynamics in Bubble Column with CFD

CFD simulation of gas holdup and gas-liquid flow in bubble columns

Effect of gas distributor on gas–liquid dispersion and mass transfer characteristics in stirred tank

Numerical Simulation of Gas-Liquid Flow Through a 90° Duct Bend with a Gradual Contraction Pipe

Structural Improvement and Numerical Simulation of a Perforated Distributor in an Adsorption Tower

A new approach to intensify the structured packing

CFD Simulation of Flow and Mass Transfer in Structured Packing Distillation Columns

Investigation of countercurrent flow profile and liquid holdup in random packed column with local CFD data

CFD modeling of double-partition divided-wall column for mass transfer characteristics

Inlet and outlet effects on flow patterns in gas-solid risers

Effects of internals and distributors on the distribution and growth of bubbles in the conventional gas–solid fluidized bed