Abstract:Water-foamed injection molding (WFIM) uses conventional injection molding (CIM) with water as a physical foaming agent. Compared to CIM, WFIM is a much more complicated process. As such, it is critical to determine the processing conditions for fabricating quality parts using WFIM. We used the design of experiment (DOE) method based on the Taguchi method to determine the influence of the processing conditions on the morphological structure and ductility of PP/LDPE WFIM parts, which were investigated by tensile testing and scanning electron microscopy (SEM). Our research suggests that fabricating PP/LDPE super-ductile parts using WFIM is indeed feasible. Our research also indicates that there is a close relationship between the ductility and the foamed structures, both of which are deeply influenced by the processing conditions. The analysis of variance results shows further that the water content had the greatest influence on the ductility, followed by the melt temperature, packing time, packing pressure, and PP/LDPE ratio. However, the ductility was only slightly influenced by the mold temperature, injection pressure, and injection time in WFIM. As to the number of cells, the order of influence was melt temperature, water content, packing time, packing pressure, mold temperature, injection pressure, PP/LDPE ratio, and injection time, in that order. In addition, applying DOE is a quite effective method for deducing the optimal set of effective factors in WFIM to produce super-ductile parts with a maximum number of cells. To our knowledge, this is the first time that the relationship among the processing conditions, ductility, and foamed structure of PP/LDPE WFIM super-ductile parts has been investigated and reported.

Analysis on Influencing Factors in Dry-molding Process of Straw Packaging Container

Influence of Hot Press Molding Parameters on the Tensile Strength of Bamboo Fiber/PLA Composites

Study on the Moisture Content and Tensile Properties of Corn Straw

The straw compression molding technology application analysis

Study of Sampling Conditions on the Elastic Modulus of Corn Straw

Research on Mechanical Properties and Simulation of Straw-Biodegradable Tableware

Current Status and Prospect of Development of Plant Straw Green Packaging Materials

The Study on Influencial Factors of the Industria Production of Straw Densification Briquetting Fuels

Optimization of technique parameters of pneumatic molding for rice straw bowl tray

Research on Corn Straw Cushion Packaging Material

Effect of drying methods and conditions and straw type and ratio in the mixture on physical and mechanical properties of biodegradable pots-based sustainable biomaterials

Advances in application of straw as feed

Study on Manufacture of Production Line and Characteristics of Rice Straw Seedling Trays

Analysis on Simulation of Static Compression Stress of Straw Bowl Based on Finite Element Method

Investigating interface adhesion of PLA-coated cellulose paper straws: Degradation, plant growth effects, and life cycle assessment

Parameter optimization of a biodegradable agricultural film manufactured with wheat straw fiber

Research State of Disposable Non-plastic Straws

Influence of Processing Conditions on the Morphological Structure and Ductility of Water-Foamed Injection Molded PP/LDPE Blended Parts

The Study on the Mechanical Properties of Poly(Lactic Acid)/Straw Fiber Composites

The Pretreatment Methods and Influence Factors During Anaerobic Fermentation of Straw: A Review

Eco-Innovation: Corn Stover as the Biomaterial in Packaging Designs