Abstract:The electrostatic susceptibility of digital relay was experimentally studied through discharging to the shell by the electrostatic discharge (ESD) generator. On the basis of deeply analyzing the coupling path of interference caused by ESD and operation state of digital relay, the voltage of direct current (DC) side of power supply module of digital relay was selected as the object to research the susceptibility to electrostatic discharge, the relation between the voltage of DC side of power supply module and ESD voltage was founded by spectrum analyzing. From integral tendency, it could be seen that the voltage of DC side of power supply module increased as the discharge voltage raising. When anti-interference methods, such as shield, grounding and filter waves, were adopted, the susceptibility to electrostatic discharge of equipment decreased and voltage of DC side changed accordingly. The following results were gotten by analyzing spectrum of the voltage of DC side: change occurred at the high frequency part of the spectrum of the voltage of DC side when the ESD gun zapping on the discontinous spot of shielding conductor, the spectrum of DC side was related to the characteristic of impedance of ground wire at various frequency bands, the characteristic of wave filter could influence the spectrum of the voltage of DC side. Spectrum analyzing result of the voltage of DC side is coordinated with suppression effectiveness of these anti-interference methods at various frequency bands. A piece of conclusion was obtained accordingly: voltage of DC side of power supply module of digital relay has some correlation with its electrostatic discharge susceptibility.

Research on Analysis Method of Conducted Electromagnetic Emission of DC Solid State Relay With Transformer Isolation

Study on electromagnetic emission of DC SSR with transformer isolation

Radiated Sensitivity of DC Solid State Relay Based on Electromagnetic Topology and Finite Element Method

Study On Ems Of Dc Ssr Under Interference Eft Burst

Study On Ems Of Solid State Relay (Ssr) With Voltage Dips And Short Interruptions

Design of Power Supply for Relay Testing Instrument Based on Micro-computer

Simulation and Analysis of Electromagnetic Properties at the Secondary Port of Electronic Current Transformers Under Very Fast Transient Overvoltage

Study on the Conducted EMI of Electromagnetic Relay

Analysis of Radiated EMI in Timing Relay

A Modeling Method On Electromagnetic Interference Coupling Path Of Digital Relay In Power System

Conducted emission analysis and suppression design of a DC/DC semi-isolated power supply

Study on Conducted EMI of Relay Arc in the Presence of Parasitic Parameters of Contacts and Reeds

Study on Conducted Emi from Operation of Electromagnetic Relay Contacts

Experimental Studies on the Susceptibility to Electrostatic Discharge of Digital Relay

Finite Element Analysis of Static Characteristics of Electromagnetic Relay Interfered by Static Magnetic Field

Research of Algorithm and Analysis of Performance for DC Surge Impedance Relay

Analysis of Operation Characteristics of Electromagnetic Relay with Conducted Interferences

A steady-state thermal network analysis modeling method for hermetically sealed electromagnetic relay and its experimental verification

Analysis and Suppression of Common-Mode EMI Noise in 1 MHz 380 V-12 V DCX Converter with Low NFoM Devices

Common-mode Electromagnetic Interference Mitigation for Solid-state Transformers

Research on Method Used for Extracting Multilayer Coil' S Stray Capacitance of Electromagnetic Relay