Abstract:As a novel technology in ultra-smooth surface machining, atmospheric pressure inductively coupled with plasma jet processing can produce plasma with high density and energy. This capability makes it a perfect medium in fully exciting the reactive gases to improve the material removal rate. This paper is directed towards using the emission spectrometer to monitor and measure the spectra of the plasma jet from 400~1 000 nm. Spectral lines with obvious peaks and large energy differences are selected from the measurement results to calculate the electron temperatures. The measured spectral data are the integrals of emission coefficients along the optical path, and the plasma has a circularly symmetry with respect to the torch axis. Abel inversion transform is employed to compute the emission coefficients of the measured spectrum. These coefficients are then applied to obtain the electron temperatures with Boltzmann plot method. The calculation results denote that the temperature profiles appear to be typically double-peak profiles as a result of the skin effect and swirling inlet flow. With the increasing of off distance, the double-peak effect decreases and the profiles become smooth. The results also indicate that the plasma fringe is somewhat deviate from the local thermodynamic equilibrium, and the applicability of Boltzmann plot method is reduced. Consequently the goodness-of-fit factors, R-Squared values, on the plasma fringe are reduced. The spectra and characteristics of the argon plasma with reactive gas CF4 are also analyzed. This mixed plasma shows bright blue-green color. The reason for the color is that some band spectra emerge between the range of 400~650 nm. These band spectra are the swan bands of diatomic C2 which is formed by the fully excitation of carbon source CF4.

STUDY OF SUPER HIGH TEMPERATURE THERMAL CHEMICAL ABLATION FOR CARBON/CARBON COMPOSITE MATERIAL BASED ON SPECTRUM

RESULTS ANALYZED OF SURPER HIGH TEMPERATURE THERMAL CHEMICAL ABLATION FOR CARBON-BASED COMPOSITE MATERIAL

Experiments on X-ray-ablated C8H8samples

High Temperature Thermal Chemical Ablative Calculation for Carbon Composite Materials by Minimization of Energy Function

Numerical Simulation of High Temperature Thermal Chemical Ablation for Carbon Composite Material

Microstructure, Thermophysical Property and Ablation Behavior of High Thermal Conductivity Carbon/carbon Composites after Heat-Treatment

The Ablation Property of Hybrid C/C Composite

Ablation behaviors of ultra-high temperature ceramic composites

Experimental And Numerical Evaluation Of The Ablation Process Of Carbon/Carbon Composites Using High Velocity Oxygen Fuel System

Preliminary Tests of Non-Ablative Thermal Protection Materials

Ablation behavior and mechanisms of Cf/(CrZrHfNbTa)C‒SiC high‐entropy composite at temperatures up to 2450°C

Ablation Experiments of High-Temperature Materials (Inconel, C–C and SiC) Using a High-Velocity Oxygen-Fuel Torch

Effect of Carbide Particles on the Ablation Properties of Tungsten Composites

Ablation behavior of C f /ZrC–SiC ultra–high temperature ceramic composites in oxyacetylene torch and plasma wind tunnel

Ablation mechanism of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC composite during plasma ablation above 2000 °C

Ablation Experiments of Ultra-High-Temperature Ceramic Coating on Carbon–Carbon Composite Using ICP Plasma Wind Tunnel

Ablation behavior and mechanisms of 3D C<sub>f</sub>/ZrB<sub>2</sub>-SiC composite applied in long-term temperature up to 2400 C

[Research on the Electron Temperature and Emission Spectroscopy of the Atmospheric Inductively Coupled with Plasma Processing]

Ablation behavior and mechanisms of 3D-Cf/Ta0.8Hf0.2C-SiC composite at temperatures up to 2500 °C

Thermal Damage and Microstructure Evolution Mechanisms of Cf/SiBCN Composites During Plasma Ablation

Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites