Abstract:The oxide layer formed by ultra‐high melt point oxides (ZrO2, HfO2) and SiO2 glassy melt is the key to the application of traditional thermal structural materials in extremely high‐temperature environment. However, the negative effect of ZrO2 and HfO2 phase transitions on the stability of oxide layer and rapid volatilization of low viscosity SiO2 melt limit its application in aerospace. In this study, the ablation behavior of Cf/(CrZrHfNbTa)C‒SiC high‐entropy composite was explored systematically via an air plasma ablation test, under a heat flux of 5 MW/m2 at temperatures up to 2450°C. The composite presents an outstanding ablation resistance, with linear and mass ablation rates of 0.9 μm/s and 1.82 mg/s, respectively. This impressive ablation resistance is attributed to the highly stable oxide protective layer formed in situ on the ablation surface, which comprises a solid skeleton of (Zr, Hf)6(Nb, Ta)2O17 combined with spherical particles and SiO2 glassy melt. The irregular particles provide a solid skeleton in the oxides protective layer, which increased stability of the oxide layer. Moreover, the spherical particles have a crystal structure similar to that of Ta2O5 and are uniformly distributed in SiO2 glassy melt, which hinder the flow of SiO2 glassy melt and enhance its viscosity to a certain degree. And it reduces the volatilization of SiO2. In summary, the stable oxide layer was formed by irregular particles oxide and the SiO2 glassy melt with certain viscosity, thereby resulting in the impressive ablation resistance of the composite. This study fills a gap in ablation research on the (CrZrHfNbTa)C system.

High Temperature Thermal Chemical Ablative Calculation for Carbon Composite Materials by Minimization of Energy Function

Research and Engineering Computation of Ablation Character of Carbon Phenolic Aldehyde Composite Material

Numerical analysis of ablative behavior of silicone resin coated carbon fabric

Microstructure, Thermophysical Property and Ablation Behavior of High Thermal Conductivity Carbon/carbon Composites after Heat-Treatment

Numerical analyses of ablative behavior of C/C composite materials

A high-temperature volumetric ablation model for thermal protective composites

Numerical Simulation of C/C Composites Coupled Thermo-Mechanical Field under the Condition of High Temperatures and Ablation

Combinatorial approach to predict synergistic ablation behavior of carbon fiber phenolic composites under aerodynamic loading

Sublimation and oxidation zone ablation behavior of carbon/carbon composites

ABLATION OF CARBON-CARBON COMPOSITES WITH TANTALUM

Ablation and mechanical behaviour of C/C composites under an oxyacetylene flame and tensile loading environment

Ablation behavior and mechanisms of Cf/(CrZrHfNbTa)C‒SiC high‐entropy composite at temperatures up to 2450°C

Modeling the high temperature behavior of all-composite, corrugated-core sandwich panels undergoing ablation

Temperature field study and numerical computation of carbon fiber epoxy composite materials under unilateral thermal radiation

Ablation Behaviour of C/C–ZrC Composites in a Solid Rocket Motor Environment

Thermal response during volumetric ablation of carbon fiber composites under a high intensity continuous laser irradiation

Thermal response and pyrolysis behavior of carbon fiber/phthalonitrile composites under one-sided butane flame heating: Experimental and numerical analysis

Ablation behaviors of ultra-high temperature ceramic composites

Evaluation and design methods for high‐efficiency charring composite under complex coupling mechanisms in both material and boundary layer

Oxidation and Ablation of 3D Carbon-Carbon Composite at Up to 3000 °C

Ablation mechanism of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC composite during plasma ablation above 2000 °C