Abstract:On the basis of the study for the heat generation mechanism in unidirectional composites under tensile impact and the interaction between the temperature and the mechanical behaviour of the composite and its constituents, a dynamic Monte Carlo microscopic damage constitutive model taking thermo-mechanics coupling into account is proposed. The foundation of the model is the dynamic Monte Carlo microscopic numerical constitutive damage model for unidirectional composites. The key of the model is to calculate the coupling effect through a statistical average interation method. In this way one can simulate the composite deformation, damage and failure process, and predict its stress/strain curve. The numerical results (stress/strain curves) for unidirectional GRP provide good correlation with experiment results at a strain rate of 300 s−1, based on the bimodal Weibull distribution model of fiber strength. This suggests that the model and the method are rational and effective. Further study shows that the non-linearity of the dynamic stress/strain curve of the composite and its toughness at high strain rates are mainly induced by the cumulative breakage of fibers and its rate and temperature dependence, and thermo-mechanical coupling. Inertia has some effect on the non-linearity of the stress/strain curve and the high-velocity toughness of the composites. The study also shows that the simulations should be carried out on the bimodal Weibull distribution model of the fibers strength. However, there exist a certain deviation between the simulation results and the experiment results when the strain rate is above 800 s−1, and the strain is more than 4%, and further investigation is necessary.

Influence of thermal residual stresses on the composite macroscopic behavior

Influence of Residual Stress on the Elastic-Plastic Deformation of Composites with Two- or Three-Dimensional Randomly Oriented Inclusions

INFLUENCE OF RESIDUAL STRESS ON ELASTIC-PLASTIC DEFORMATION OF COMPOSITE MATERIALS

An Improved Analytical Solution For Process-Induced Residual Stresses And Deformations In Flat Composite Laminates Considering Thermo-Viscoelastic Effects

Analyses of thermal and residual microstresses between the particles and matrix of composites

Micromechanical Modeling on the Rate-Dependent Viscoplastic Behavior of Polymer Composites with Thermal Residual Stress Effect

A Microscale Analysis of Thermal Residual Stresses in Composites with Different Ply Orientations

Finite Element Analysis of Thermal Residual Stress in Unidirectional Fiber Reinforced Composite

Multi-Scale Modeling and Damage Analysis of Composite with Thermal Residual Stress

Micromechanical Modeling of Viscoplastic Behavior of Laminated Polymer Composites with Thermal Residual Stress Effect

Temperature Effects on Transverse Failure Modes of Carbon Fiber/bismaleimides Composites

New Insight into Residual Stresses in Amine-Grafted MWCNTs/binary Resin Composites under Complex Thermomechanical Loadings

Effect of thermal residual stresses on yielding behavior under tensile or compressive loading of short fiber reinforced metal matrix composite

Influence of Inclusion's Orientation and Spatial Distribution on Elastic-plastic Properties of Composites

Effects of Inter-Fiber Spacing and Thermal Residual Stress on Transverse Failure of Fiber-Reinforced Polymer–matrix Composites

Initial Damage Induced by Thermal Residual Stress and Microscopic Failure Analysis of Carbon-Fiber Reinforced Composite under Shear Loading

A Dynamic Monte Carlo Microscopic Damage Model Incorporating Thermo-Mechanical Coupling in a Unidirectional Composite

Effects of thermal stress and imperfect interfacial bonding on the mechanical behavior of composites subjected to off-axis loading

Thermal Residual Stresses and Stress Distributions under Tensile and Compressive Loadings of Short Fiber Reinforced Metal Matrix Composites

The Effect of Thermal Residual Stress on the Stress State in a Short-Fiber Reinforced Thermoplastic

The Effects of Thermal Residual Stresses and Interfacial Properties on the Transverse Behaviors of Fiber Composites with Different Microstructures