Abstract:Introducing two-dimensional (2D) conjugated structures to polymers is a feasible way for the design of functionalized polymers due to their good planarity, high electron/hole mobility, thermal stabilities, and so forth. However, the current development of thermoelectric polymers is mainly restricted to the limited modification of the one-dimensional conjugated polymers. Herein, a novel donor–acceptor based 2D conjugated polymer, P(BDTTT-DPP), was designed and synthesized for the enhancement of thermoelectric properties. Compared to the one-dimensional conjugated polymer P(BDT-DPP), P(BDTTT-DPP) showed a higher doping level when doped with the p-type FeCl3 dopant. After doping with 20 mg/mL FeCl3 for 15 min, the optimal power factor of P(BDTTT-DPP) was obtained to be 6.50 μW m–1 K–2 at room temperature, which is 26 times higher than that of P(BDT-DPP). The studies of film morphology and packing structure analysis further indicated that the π–π stacking (010) distance of P(BDTTT-DPP) was maintained after the doping process, and the longer lamellar stacking distance allowed the FeCl3 dopants to efficiently incorporate between the lamellar domains compared to that of P(BDT-DPP), which is favorable to the crystallinity and electron transferability. The results of our work provide valuable insights into the development of donor–acceptor based 2D conjugated polymer for high-performance organic thermoelectric materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00274?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00274</a>.Details of materials and experimental sections; instruments and measurements; 1H NMR spectrum of P(BDTTT-DPP) and P(BDT-DPP); GPC of P(BDTTT-DPP) and P(BDT-DPP); TGA curves of P(BDTTT-DPP), P(BDT-DPP), doped P(BDTTT-DPP), and doped P(BDT-DPP); DSC curves of P(BDTTT-DPP) and P(BDT-DPP); cyclic voltammograms of ferrocene; UV–vis–NIR absorption spectra of the pristine and doped P(BDT-DPP); detail of solution and film preparation for UV–vis–NIR testing; TE performance of P(BDT-DPP) films with a doping concentration of 20 mg/mL FeCl3 at different doping times at room temperature; SEM cross-sectional images of pristine and doped polymers; AFM phase image and XRD spectra of pristine polymer films and doped polymer films; and d-spacing of π–π stacking and layer stacking for polymers (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00274/suppl_file/ae1c00274_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Thermal Undoping Behavior of FeCl3-doped Poly(3-Octylthiophene)

Thermal Analysis of FeCl 3 -Doped Poly(3-Butylthiophene) and Poly(3-Dodecylthiophene)

The FeCl3-doped poly(3-alkyithiophenes) in solid state

Anion-Dependent Molecular Doping and Charge Transport in Ferric Salt-Doped P3HT for Thermoelectric Application

FeCl3 as a low-cost and efficient p-type dopant of Spiro-OMeTAD for high performance perovskite solar cells

Combining chemical doping and thermal annealing to optimize the thermoelectric performance of the poly(3-hexylthiophene)

Unravelling Doping Effects on Pedot at the Molecular Level: from Geometry to Thermoelectric Transport Properties

EXAFS STUDY ON ELECTRICALLY CONDUCTIVE POLYMERS (Ⅱ) FeCl3-DOPED POLYTHIOPHENE

Hybrid Thermal Transport Characteristics of Doped Organic Semiconductor Poly(3,4-ethylenedioxythiophene):Tosylate

CONDUCTIVITY AND SPECTROSCOPIC CHARACTERIZATION OF POLYACETYLENE DOPED WITH FERRIC-CHLORIDE

Enhancing the thermoelectric performance of donor–acceptor conjugated polymers through dopant miscibility: a comparative study of fluorinated substituents and side-chain lengths

Effect of Molecular Weight on Thermoelectric Performance of P3HT Analogues with 2-Propoxyethyl Side Chains

Phase‐Selective Doping of Oriented Regioregular Poly(3‐hexylthiophene‐2,5‐diyl) Controls Stability of Thermoelectric Properties

Structure Characterization of Sulfuric Acid-Doped Poly(3-Octylthiophene)

Poly(3-Dodecylthiophenes) Polymerized with Different Amounts of Catalyst

Vibration and X-ray Photoelectron Spectroscopies of FeCl3-doped Poly(p-Diethynylbenzene)

Temperature-Driven Phase Transition of a Fused Dithienobenzothiadiazole–Tetrathiophene Based Semiconducting Copolymer

Enhanced Thermoelectric Performance of a Donor–Acceptor-Based Two-Dimensional Conjugated Polymer with High Crystallinity

UV-to-IR Absorption of Molecularly p-Doped Polythiophenes with Alkyl and Oligoether Side Chains: Experiment and Interpretation Based on Density Functional Theory

Characterization and Properties of the Neutral and Doped Blends of Poly(3‐dodecylthiophene) with Low‐density Polyethylene

Solution‐Doped Donor–Acceptor Copolymers Based on Diketopyrrolopyrrole and 3, 3′‐Bis (2‐(2‐(2‐Methoxyethoxy) Ethoxy) ethoxy)‐2, 2′‐Bithiophene Exhibiting Outstanding Thermoelectric Power Factors with p‐Dopants