Abstract:Introducing two-dimensional (2D) conjugated structures to polymers is a feasible way for the design of functionalized polymers due to their good planarity, high electron/hole mobility, thermal stabilities, and so forth. However, the current development of thermoelectric polymers is mainly restricted to the limited modification of the one-dimensional conjugated polymers. Herein, a novel donor–acceptor based 2D conjugated polymer, P(BDTTT-DPP), was designed and synthesized for the enhancement of thermoelectric properties. Compared to the one-dimensional conjugated polymer P(BDT-DPP), P(BDTTT-DPP) showed a higher doping level when doped with the p-type FeCl3 dopant. After doping with 20 mg/mL FeCl3 for 15 min, the optimal power factor of P(BDTTT-DPP) was obtained to be 6.50 μW m–1 K–2 at room temperature, which is 26 times higher than that of P(BDT-DPP). The studies of film morphology and packing structure analysis further indicated that the π–π stacking (010) distance of P(BDTTT-DPP) was maintained after the doping process, and the longer lamellar stacking distance allowed the FeCl3 dopants to efficiently incorporate between the lamellar domains compared to that of P(BDT-DPP), which is favorable to the crystallinity and electron transferability. The results of our work provide valuable insights into the development of donor–acceptor based 2D conjugated polymer for high-performance organic thermoelectric materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00274?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00274</a>.Details of materials and experimental sections; instruments and measurements; 1H NMR spectrum of P(BDTTT-DPP) and P(BDT-DPP); GPC of P(BDTTT-DPP) and P(BDT-DPP); TGA curves of P(BDTTT-DPP), P(BDT-DPP), doped P(BDTTT-DPP), and doped P(BDT-DPP); DSC curves of P(BDTTT-DPP) and P(BDT-DPP); cyclic voltammograms of ferrocene; UV–vis–NIR absorption spectra of the pristine and doped P(BDT-DPP); detail of solution and film preparation for UV–vis–NIR testing; TE performance of P(BDT-DPP) films with a doping concentration of 20 mg/mL FeCl3 at different doping times at room temperature; SEM cross-sectional images of pristine and doped polymers; AFM phase image and XRD spectra of pristine polymer films and doped polymer films; and d-spacing of π–π stacking and layer stacking for polymers (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00274/suppl_file/ae1c00274_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effect of Molecular Weight on Thermoelectric Performance of P3HT Analogues with 2-Propoxyethyl Side Chains

Poly(3-hexylthio) Thiophene Field-effect Transistor Device Performance: Impact of the Content of Hexylthio Side Chain on Backbone

Combining chemical doping and thermal annealing to optimize the thermoelectric performance of the poly(3-hexylthiophene)

Anion-Dependent Molecular Doping and Charge Transport in Ferric Salt-Doped P3HT for Thermoelectric Application

Unravelling Doping Effects on Pedot at the Molecular Level: from Geometry to Thermoelectric Transport Properties

Revealing the Molar Mass Dependence on Thermal, Microstructural, and Electrical Properties of Direct Arylation Polycondensation Prepared Poly(3-hexylthiophene)

Progress in Poly (3‐hexylthiophene) Organic Solar Cells and the Influence of Its Molecular Weight on Device Performance

Solution‐Doped Donor–Acceptor Copolymers Based on Diketopyrrolopyrrole and 3, 3′‐Bis (2‐(2‐(2‐Methoxyethoxy) Ethoxy) ethoxy)‐2, 2′‐Bithiophene Exhibiting Outstanding Thermoelectric Power Factors with p‐Dopants

Effect of the Molecular Weight of Poly(3-Hexylthiophene) on the Performance of Solid-State Dye-Sensitized Solar Cells

Phase‐Selective Doping of Oriented Regioregular Poly(3‐hexylthiophene‐2,5‐diyl) Controls Stability of Thermoelectric Properties

Thermophysical Properties of Free-Standing Micrometer-Thick Poly (3-Hexylthiophene) Films

Boosting the Thermoelectric Performance of the Doped DPP‐EDOT Conjugated Polymer by Incorporating an Ionic Additive

Enhancing the Thermoelectric Properties of Conjugated Polymers by Suppressing Dopant‐Induced Disorder

Using Scanning Probe Microscopy to Study the Effect of Molecular Weight of Poly(3-Hexylthiophene) on the Performance of Poly(3-Hexylthiophene):Tio2 Nanorod Photovoltaic Devices

High Intrinsic Thermal Conductivity of Polythiophene by Reducing Steric Hindrance and Enhancing P‐π Conjugation

Enhanced Thermoelectric Performance of a Donor–Acceptor-Based Two-Dimensional Conjugated Polymer with High Crystallinity

The ameliorative thermoelectric performance induced by heteroatom for dithiophene cyclopentadiene-based polymers and carbon nanotubes composite films

Remarkable Enhancement of Thermoelectric Performance of Semicrystalline Polymer Films Upon Incorporating A Nucleating Agent Additive

Effect of Polymer Molecular Weight on Morphology and Charge Transport of Small-Molecular Organic Semiconductors

Effects of different electrolytes and film thicknesses on structural and thermoelectric properties of electropolymerized poly(3,4-ethylenedioxythiophene) films

UV-to-IR Absorption of Molecularly p-Doped Polythiophenes with Alkyl and Oligoether Side Chains: Experiment and Interpretation Based on Density Functional Theory