Abstract:The effect of different iron (III) dopants on the doping process and charge transport properties based on a poly(3-hexylthiophene) (P3HT) film was investigated. It is found that the doping level is dependent on not only the driving force for charge transfer but also the miscibility between a polymer and a dopant, while the mobile carrier transport is significantly controlled by the microstructure upon doping. A high electrical conductivity (128 S cm–1) is obtained for a FeCl3-doped P3HT film among three different doped P3HT combinations, although a low doping level is observed in this film. In contrast, a highest doping level but a low electrical conductivity (65 S cm–1) is achieved for Fe(OTf)3-doped P3HT. Another ferric salt with a larger size anion and strong oxidation ability, Fe(Tos)3, endows both much low doping level and low electrical conductivity (9 S cm–1). Grazing-incidence wide-angle X-ray scattering (GIWAXS) shows that a much stronger π–π stacking of P3HT and larger crystalline domains may exist in Fe(OTf)3-doped P3HT compared with those of FeCl3-doped P3HT. However, Hall-effect measurements show that the high electrical conductivity of FeCl3-doped P3HT is mainly attributed to higher carrier mobility. Temperature-dependent conductivity experiments demonstrate that smaller activation energy for carrier transport is needed for a FeCl3-doped P3HT film. These results indicate that smooth and continuous transport paths are formed in a FeCl3-doped film, contributing to high carrier mobility while discrete domains in Fe(OTf)3-doped film hamper the carrier transport. A prototype device with a five-leg FeCl3-doped P3HT film connected with a silver paste was fabricated. The measured maximum output power is about 4.64 nW at the temperature difference of 23.3 K. Our results suggest that the interaction between dopant anions and polymer chains is crucial for high electrical conductivity by improving morphologies to achieve ionized carriers' transfer into much mobile carriers.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c01067?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c01067</a>.GPC curves, the cyclic voltammogram, Raman spectra, thermoelectric parameters, AC-Hall data, and AFM images (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c01067/suppl_file/el0c01067_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Phase‐Selective Doping of Oriented Regioregular Poly(3‐hexylthiophene‐2,5‐diyl) Controls Stability of Thermoelectric Properties

Unravelling Doping Effects on Pedot at the Molecular Level: from Geometry to Thermoelectric Transport Properties

Combining chemical doping and thermal annealing to optimize the thermoelectric performance of the poly(3-hexylthiophene)

Doping Regulation of Highly Conductive PBTTT Films

Enhancing the Thermoelectric Properties of Conjugated Polymers by Suppressing Dopant‐Induced Disorder

Anion-Dependent Molecular Doping and Charge Transport in Ferric Salt-Doped P3HT for Thermoelectric Application

High Thermoelectric Performance in Solution‐Processed Semicrystalline PEDOT:PSS Films by Strong Acid–Base Treatment: Limitations and Potential

Molecular Doping-Driven Modulation of Domain Charge Transport Elevates Thermoelectric Performance in Polar Polythiophene

Effect of Molecular Weight on Thermoelectric Performance of P3HT Analogues with 2-Propoxyethyl Side Chains

Unravelling the mechanism of processing protocols induced microstructure evolution on polymer thermoelectric performance

Remarkable Enhancement of Thermoelectric Performance of Semicrystalline Polymer Films Upon Incorporating A Nucleating Agent Additive

Crystalline Domain Formation to Enable High-Performance Polymer Thermoelectrics Inspired by Thermocleavable Materials

Revealing the Enhanced Thermoelectric Properties of Controllably Doped Donor‐Acceptor Copolymer: The Impact of Regioregularity

Understanding the Effects of Molecular Dopant on N‐type Organic Thermoelectric Properties

Solution‐Doped Donor–Acceptor Copolymers Based on Diketopyrrolopyrrole and 3, 3′‐Bis (2‐(2‐(2‐Methoxyethoxy) Ethoxy) ethoxy)‐2, 2′‐Bithiophene Exhibiting Outstanding Thermoelectric Power Factors with p‐Dopants

Electric‐Field‐Controlled Dopant Distribution in Organic Semiconductors

A Thermoelectric Polymer Field-Effect Transistor via Iodine-Doped P3HT

Controlling the Thermoelectric Performance of Doped Naphthobisthiadiazole‐Based Donor–Acceptor Conjugated Polymers through Backbone Engineering

Poly(3-hexylthio) Thiophene Field-effect Transistor Device Performance: Impact of the Content of Hexylthio Side Chain on Backbone

Optimizing the doping efficiency and thermoelectric properties of isoindigo-based conjugated polymers using side chain engineering

Enhancing the thermoelectric performance of donor–acceptor conjugated polymers through dopant miscibility: a comparative study of fluorinated substituents and side-chain lengths