Abstract:With the increasing usages of high strength and lightweight materials, how to accurately predict and fully understand the wrinkling instability of thin-walled parts forming under various loading conditions, viz. stress states and normal constraints, is still a challenge for free-defect design and manufacturing. In this study, taking tension-compression stress state w/wo normal constraints (Yoshida test and deep drawing of sheets) and compression stress state w/wo normal constraints (axial compression and rotary draw bending of tubes) as the comparative cases, two kinds of geometric imperfections (GI), viz., random thickness imperfection (RTI) and geometric deflection imperfection (GDI) are introuduced and implemented into dynamic explicit finite element (FE) models to realize more sensitive prediction of the wrinkling instability. And then, a systematic comparative study on the critical wrinkling behavior and final wrinkling morphology under varous loading conditions has been studied. It is found that the wrinkling is more prone to occur under tension-compression stress state, and the wrinkling of the processes without normal constraint are severer than those with normal constraints. Furthermore, the effects of material parameters on the wrinkling are inconsistent in different processes, the reason proved to be the different loading conditions. When the degree of normal constraint increases, the influence of material properties becomes negligible. Combining the geometric and material parameters, the key issues affecting the wrinkling of thin-walled parts from the perspective of loading condition have been expounded, laying the foundation and theoretical guidance for the study of wrinkling behavior under different mechanical states.

Influences of Conditions at Tube-Blank End on Viscous Medium Outer Pressure Necking of Thin-Wall Parts

Viscous medium outer pressure necking forming and numerical simulation for thin-wall parts

Influence of tube blank diameter on necking forming under outer pressure in viscous medium

Research on Forming Process and Deformation Rule for the Necking of Viscous Medium under Outer Pressures

Wrinkling and Instability Analysis of Thin-Wall Cylindrical Parts in Viscous Medium Outer Pressure Necking

Influence of the shape of necking area on the necking of viscous medium by outer pressure

The influence of length–diameter ratio in forming area on viscous outer pressure forming and limit diameter reduction

The Influence of Loading Mode on the Necking of Viscous Media under Outer Pressures

Numerical analysis of tube-blank boundary conditions in the tube-compression by viscous pressure forming

Analysis of Deformation in Viscous Medium Outer Pressure Necking for Thin-Wall Parts with Variable Diameter Section

Numerical Simulation and Buckling Analysis of Tube External Pressure Forming

Significance Analysis of Weld and Processing Parameters on Wall Thinning and Cross-Sectional Deformation of Welded Tube in Nc Bending Process

Effect of boundary conditions of cylindrical shells on stabilisation of tube compression by viscous pressure forming

Influences of Forming Parameters on Wrinkling in NC Thin-walled Tube Bending

Influence of Tube Ends Constraint on Hydro-Bending of Thin-Walled Aluminum Tube

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Loading conditions constrained wrinkling behaviors of thin-walled sheet/tube parts during metal forming

Application and approaches of viscous medium inner pressure forming of thin-wall variable-diameter parts

Effects of Internal Pressure on Wrinkling in Warm Tube Hydroforming

Effect of Internal Pressure on Thin-Walled Tubes Bending with Internal Pressure

Viscous Inner and Outer Pressure Forming Method of Thin-Walled Tube and Its Application