Abstract:The free-bending process of a metal tube involves a geometric relationship between the eccentricity, the rotation angle of the bending die, the deformation zone length, and the bending radius. Ideally, during the forming process, the contact position between the bending die, and the outer bend of the tube remains tangent. However, due to factors such as the clearance of the bending die and material properties, the rotation angle can be adjusted within a specific range while still ensuring smooth tube formation. The tangential state is disrupted when the rotation angle changes, resulting in overbending or underbending. Thus, in this study, a new theoretical analysis of the free bending process, accounting for clearance, was developed to analyse the material flow and changes in the bending radius during the nontangential contact between the bending die and the tube. In addition, the reasons for achieving smooth tube bending even after adjusting the rotation angle were explained, and the deformation mechanism of the tube under the combined effects of additional tangential force from the bending die and axial propulsive force was analysed. Furthermore, the impact of the rotation angle on the bending radius and the displacement of the strain neutral layer (strain NL) was determined. Afterwards, finite element (FE) modeling and forming experiments were conducted to verify the proposed theoretical analysis under different deformation zone lengths and eccentricities conditions. Besides, the distribution of the inner and outer wall thicknesses of the tube under the nontangential rotation of the bending die was further analysed. The simulation and experimental results fit well with that obtained from theoretical analysis.

The influence of length–diameter ratio in forming area on viscous outer pressure forming and limit diameter reduction

Viscous Inner and Outer Pressure Forming Method of Thin-Walled Tube and Its Application

Influence of mechanical properties of tube on forming limits and deformation characteristics in expansion drawing process

Viscous medium outer pressure necking forming and numerical simulation for thin-wall parts

Influences of Conditions at Tube-Blank End on Viscous Medium Outer Pressure Necking of Thin-Wall Parts

Influence of Extrusion Ratio on Forming of Thick-Walled Tube

Influence of tube blank diameter on necking forming under outer pressure in viscous medium

Application and approaches of viscous medium inner pressure forming of thin-wall variable-diameter parts

Numerical Simulation and Buckling Analysis of Tube External Pressure Forming

Research on multi-steps tube-compression of thin-wall parts with variable diameter by viscous pressure forming

Forming characteristics of thin-walled tubes manufactured by free bending process-based nontangential rotation bending die

Finite Element Analysis of Effect of Interface Lubrication on Tube-Compression of Thin-Walled Part in Viscous Pressure Forming

Influence of the shape of necking area on the necking of viscous medium by outer pressure

FEM Analysis of Mechanism of Free Deformation under Dieless Constraint in Axial Compressive Forming Process of Tube

Influence of process parameters on the flow forming quality of thin-walled tube with large diameter-thickness ratio

Wrinkling and Instability Analysis of Thin-Wall Cylindrical Parts in Viscous Medium Outer Pressure Necking

Study of forming process for thing-walled tube rotary bending based on numerical simulation

Thickness Demarcation Circle of Double-Cone Tube During Hydroforming

FEM Numerical Simulation of Tube Axial Drawing Process

Thickness Dividing Circle in Hydroforming of Variable Diameter Tubes

Deformation Analysis of Double Wall Brazed Tube in the Multi-Pass Roll Forming: Cross-sectional Variation, Stress-Strain Evolution and Roundness Assessment