Abstract:In this age of human civilization, there is a need for more efficient, cleaner, and renewable energy as opposed to that provided by nonrenewable sources such as coal and oil. In this sense, hydrogen energy has been proven to be a better choice. In this paper, a portable graphite crucible metal smelting furnace was used to prepare ten multi-element aluminum alloy ingots with different components. The microstructure and phase composition of the ingots and reaction products were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). The reaction was carried out in a constant temperature water bath furnace at 60 °C, and the hydrogen production performance of the multi-element aluminum alloys in different proportions was compared by the drainage gas collection method. The experimental results show that the as-cast microstructure of Al–Ga–In–Sn aluminum alloy is composed of a solid solution of Al and part of Ga, and a second phase of In3Sn. After the hydrolysis reaction, the products were dried at 150 °C and then analyzed by XRD. The products were mainly composed of AlOOH and In3Sn. Alloys with different compositions react at the same hydrolysis temperature, and the hydrogen production performance is related to the ratio of low-melting-point metal elements. By comparing two different ratios of Ga–In–Sn (GIS), the hydrogen production capacity and production rate when the ratio is 6:3:1 are generally higher than those when the ratio is 7:2:1. The second phase content affects the hydrogen production performance.

Hydrogen generation by aluminum-water reaction

Experimental Researches on Hydrogen Generation by Aluminum with Adding Lithium at High Temperature

Improved Hydrogen Generation from the Hydrolysis of Aluminum Ball Milled with Hydride

Experimental Study on the Effect of Low Melting Point Metal Additives on Hydrogen Production in the Aluminum–water Reaction

Hydrogen Production by the Reaction of Al-based Metals with Water Vapor

Experimental study on characteristics and mechanism of hydrogen production from aluminium–water reaction for carbon-free power generation

Hydrogen Production from Aluminum-Water Reactions at Low Temperatures: Based on an In-Situ Two Powders of Different Particle Sizes

Enhanced hydrogen generation from Al-water reaction mediated by metal salts

Study on Hydrogen Generation from the Hydrolysis of a Ball Milled Aluminum/calcium Hydride Composite

Current status of aluminium-water reaction for hydrogen production and cogeneration research

Thermogravimetric Analysis of Hydrogen Production of Al–Mg–Li Particles and Water

Investigation of the effect of temperature and applied electric field on the aluminum-water reaction by ReaxFF molecular dynamics

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals

Molten Salt-Enhanced Production of Hydrogen by Using Skimmed Hot Dross from Aluminum Remelting at High Temperature

Hydrogen Generation from the Reaction of Al-based Composites Activated by Low-Melting-point Metals/oxides/salts with Water

Hydrogen generation from the hydrolysis of Mg powder ball-milled with AlCl3

Effects of Aluminum Particle Size, Galinstan Content and Reaction Temperature on Hydrogen Generation Rate Using Activated Aluminum and Water

Dynamic Process of Hydrogen and Heat Generation from Reaction of Al–Li Alloy Powders and Water Vapor at Moderate Temperatures

Hydrogen Production and Temperature Change During the Reaction of Al–Li Alloy with Water Vapor

Investigation on the Improved Hydrolysis of Aluminum–calcium Hydride-Salt Mixture Elaborated by Ball Milling

Comparative Study on Activation of Aluminum with Four Liquid Metals to Generate Hydrogen in Alkaline Solution