Abstract:The proton-exchange membrane fuel cell (PEMFC) bipolar plate serpentine flow channel U-shaped region is prone to the accumulation effect, which poses serious difficulties for fuel cell water management. As a result, a deep understanding of water transport in the U-shaped region is essential to improve the fuel cell performance. Under this direction, in this work, the impact of the different microstructure parameters and initial conditions on water transport in the U-shaped region was compared with and without microstructure using the volume of the fluid method. On top of that, the velocity field distribution in the X-direction and the pressure drop distribution in the flow channel were also analyzed. From the acquired results, it was demonstrated that due to the secondary flow caused by the bending property of the microstructure, the droplet movement time in the U-shaped region was significantly shortened after the microstructure was added in the U-shaped region. The initial conditions strongly affected the droplet motion, and a larger contact angle enhanced the wall hydrophobicity to facilitate the droplet discharge. An increase in the droplet diameter led also to a rise in the windward area and shear force, which shortened droplet discharge time. Interestingly, if the waveform microstructure has too-large crests, gullies will be created that will impede the droplet motion and increase the amplitude of the droplet oscillation, resulting in excessive pressure drop in the flow channel. A too-large period led to increased droplet momentum loss, whereas a short period reduced the wall contact angle, which is not conducive to drainage. The microstructure spacing significantly affected the droplet motion, and the reduced spacing increased the airflow diffusion effect to accelerate the flow rate. The main focus of this work was led on the application of the microstructure in a U-shaped region of the serpentine flow channel, which is of great specific significance for droplet removal inside the flow channel.

The Effect of Different Flow Patterns on Anode Fluid Behaviors of Micro Direct Methanol Fuel Cells

Experimental Investigations of the Anode Flow Field of A Micro Direct Methanol Fuel Cell

Experimental investigation of CO2 bubbles behavior in the anode flow fields of Micro Direct Methanol Fuel Cells

Effects of anode flow field design on the performance of micro direct methanol fuel cell

Design and Simulation of Air-Breathing Micro Direct Methanol Fuel Cells with Different Anode Flow Fields.

Effect of cathode gas flow patterns on performance of micro direct methanol fuel cell

Investigation Of Mass Transport And Cell Performance On Mu Dmfc With Different Anode Flow Fields

Design, Fabrication and Testing of an Air-Breathing Micro Direct Methanol Fuel Cell with Compound Anode Flow Field

The Effects of Different Flow Channels on Silicon-based Micro Direct Methanol Fuel Cells

Anode Flow Field Structures of Micro Direct Methanol Fuel Cell

A Tapered Serpentine Flow Field for the Anode of Micro Direct Methanol Fuel Cells

Parameters research of the anode flow field of a micro direct methanol fuel cell

Effect of Anode Flow Pattern Design on the Performance of Micro Air-Breathing DMFC

Study of Micro Direct Methanol Fuel Cell Plate Configuration

Effect of anode flow field on silicon-based µDMFC

Effects of Microstructure on Water Removal in the U-Shaped Region of PEMFC Serpentine Flow Channel

Hydrophilicity effect on micro-scale flow of µDMFC

Investigation of Μdmfc (micro Direct Methanol Fuel Cell) with Self-Adaptive Flow Rate

Experimental Investigations of Anode Structure on the Performance of Air-Breathing Μdmfc

Effects Of Anode Diffusion On Direct Methanol Fuel Cell (Dmfc) Performance

Investigation Of Corner Effect On Micro-Scale Flow Of Mu Dmfc