Abstract:This study focused on optimizing the hot forging process for AISI 1045 medium carbon steel ball joints, which is crucial for enhancing both their mechanical properties and production efficiency. Traditional hot forging processes often face challenges due to variations in flow stress and microstructural outcomes, which can result in a suboptimal product performance. To address these challenges, this research employed the Taguchi method in conjunction with a finite element (FE) simulation to identify the optimal forging parameters. The Arrhenius constitutive model, based on the Zener–Hollomon parameter, was applied to predict the flow stress with a high level of accuracy, achieving a coefficient of determination (R2) of 0.968 and an average absolute relative error (AARE) of 7.079%. An analysis of variance (ANOVA), a statistical innovation that partitions the total variation into components linked to key process factors, was utilized to determine the significance of these parameters. The ANOVA revealed that the billet temperature played a significant role in influencing the preforming force, finishing force, and mean stress, with a maximum impact of 62.30%, 59.50%, and 94.20% on the variation in the response variable, respectively. Additionally, the friction factor significantly affected the preforming and finishing forces, contributing 36.19% and 38.28%. The validation of the model through both simulations and practical experiments is a testament to the reliability of this research, demonstrating the accuracy of the model with minimal discrepancies in the forging forces and exhibiting errors of just 2.88% and 3.40%. Furthermore, microstructure modeling successfully predicted the key outcomes, such as the grain size and pearlite volume fraction, validating the effectiveness of the simulation in forecasting microstructural characteristics.

Optimization of Preform in Forging Process Using Kriging Model

Optimum Design Approach for Preform of Complicated Forging Blank

Optimization of preform of high-speed multi-stage forging based on surrogate model methodology

Multi-Objective Preform Optimization Using RSM

Optimization of Multi-stage Forging Process Based on the Response Surface Methodology

Numerical Simulation of Pre-forging for Connecting Rod of Automobile Engine and Optimization of Its Pre-forging Billet

Numerical Simulation of GH4169 Alloy Disc Forging Process on Counterblow Hammer

Predictive Modeling and Optimization of Hot Forging Parameters for AISI 1045 Ball Joints Using Taguchi Methodology and Finite Element Analysis

Forging process and FEM optimization for forged knuckles of railway wagons

Research on process optimization of fender based on Kriging surrogate model

Preform design optimization for forging process based on the topological approach

Numerical optimization on hot forging process of connecting rods based on RSA with experimental verification

Optimization Design of Forging-die for Automobile Flange Based on Response Surface Method

Optimization of Forging Process Parameters and Prediction Model of Residual Stress of Ti-6Al-4V Alloy

Research on Optimal Design of Preform of Forging Based on Evolutionary Structural Optimization

Optimization of Valve Disc Using Orthogonal Array and Kriging Model

Optimization of Metal-Forming Process Via a Hybrid Intelligent Optimization Technique

Evolutionary forging preform design optimization using strain-based criterion

Optimization of a Gate Valve Using Orthogonal Array and Kriging Model

A Double-Layer Optimization Method for Forging Process Parameters of Hinge Beam Structure and Size of Intermediate Billet

Design and optimization of turbine blade preform forging using RSM and NSGA II