Abstract:This study focused on optimizing the hot forging process for AISI 1045 medium carbon steel ball joints, which is crucial for enhancing both their mechanical properties and production efficiency. Traditional hot forging processes often face challenges due to variations in flow stress and microstructural outcomes, which can result in a suboptimal product performance. To address these challenges, this research employed the Taguchi method in conjunction with a finite element (FE) simulation to identify the optimal forging parameters. The Arrhenius constitutive model, based on the Zener–Hollomon parameter, was applied to predict the flow stress with a high level of accuracy, achieving a coefficient of determination (R2) of 0.968 and an average absolute relative error (AARE) of 7.079%. An analysis of variance (ANOVA), a statistical innovation that partitions the total variation into components linked to key process factors, was utilized to determine the significance of these parameters. The ANOVA revealed that the billet temperature played a significant role in influencing the preforming force, finishing force, and mean stress, with a maximum impact of 62.30%, 59.50%, and 94.20% on the variation in the response variable, respectively. Additionally, the friction factor significantly affected the preforming and finishing forces, contributing 36.19% and 38.28%. The validation of the model through both simulations and practical experiments is a testament to the reliability of this research, demonstrating the accuracy of the model with minimal discrepancies in the forging forces and exhibiting errors of just 2.88% and 3.40%. Furthermore, microstructure modeling successfully predicted the key outcomes, such as the grain size and pearlite volume fraction, validating the effectiveness of the simulation in forecasting microstructural characteristics.

Compensation of billet variabilities through metamodel-based optimization in open die forging

Numerical Simulation of Pre-forging for Connecting Rod of Automobile Engine and Optimization of Its Pre-forging Billet

Accurate real-time modeling for multiple-blow forging

Parameters Optimization of Tailor Welded Blank Forming Process

Enhancing the Robustness of Rib-Groove Filling and Strain Homogeneity in the Isothermal Forging of Titanium Alloy Multi-Rib Components

Optimization of Forging Preforms by Using Pseudo Inverse Approach

Improving the Deformation Uniformity Within Forgings by Applying Preformed Optimization Based on FEM

Cylindrical Billet Size Optimization for Hot Closed-Die Forging of the Upper Ball Joint

Multi-objective optimization of concave radial forging process parameters based on response surface methodology and genetic algorithm

Technical review on design optimization in forging

Sheet metal forming optimization by using surrogate modeling techniques

Forging Tool Shape Optimization Using Pseudo Inverse Approach and Adaptive Incremental Approach

Closed Die Forging Preform Shape Design Using Isothermal Surfaces Method

A knowledge base model for complex forging die machining

Predictive Modeling and Optimization of Hot Forging Parameters for AISI 1045 Ball Joints Using Taguchi Methodology and Finite Element Analysis

Numerical simulation and experimental validation of microstructure evolution during the upsetting process of a large size martensitic stainless steel forging

Design and optimization of turbine blade preform forging using RSM and NSGA II

A New Method for Controlling Billet Temperature During Isothermal Die Forging of a Complex Superalloy Casing

Optimization of Forging Process Parameters and Prediction Model of Residual Stress of Ti-6Al-4V Alloy

Experimental Verification of a Benchmark Forming Simulation

Numerical Optimization of Variable Blank Holder Force Trajectories in Stamping Process for Multi-Defect Reduction