Abstract:In this paper, the effect of the raw particle size and the annealing process on the compositions, microstructure, mechanical, thermal, and electrical properties of ZnO varistors was investigated using X-ray diffraction, infrared, X-ray photoelectron spectroscopy, scanning electron microscopy, electric field–current density, capacitance–voltage, mechanical, and thermal expansion measurements. Furthermore, the ZnO grain growth mechanism during the annealing process was discussed in detail. Results show that when the raw particle size equaled 90 nm and sintering was performed at 1100 °C for 2 h, the obtained ZnO-based varistors possessed excellent mechanical, thermal, and electrical properties; the E1mA, α, JL, and K values were 1015.3 V mm–1, 37.98, 2.45 μA cm–2, and 1.37, respectively, due to the highest bulk density and the finest uniform particle size distribution. When annealing occurred at 300 °C for three times, values of σf, KIC, E1mA, α, JL, and K reached 175.35 MPa, 1.96 MPa m1/2, 1180.2 V mm–1, 43.58, 2.15 μA cm–2, and 1.2, indicating improvements of approximately 14.7%, 4%, 16.2%, 14.7%, − 12.2%, and 11.11% compared with those of the non-annealed ZnO-based varistors, respectively, being due to the improved uniformity of grain size distribution and the re-distribution of donor Al3+ and Y3+ in the ZnO crystal and grain boundary. The annealing process lead to the transformation of Sb3+ to Sb5+ in the ZnO crystal, which could generate two additional coordination sites. The newly generated sites could combine with O2- in other crystals to increase the grain growth, resulting in clear grain growth on the surface, improved grain size distribution, and regular grain shape in the interior of ZnO-based varistors.

The Influence of Heat-Treatment on the Current-Voltage Behavior of the Zno-Bi2o3 Based Varistors

Influence of Heat-treatment on ZnO-Bi2O3 Based Varistor Ceramics Doped with Rare Earth Oxides

Effects of Heat Treatment on the Varistor Performance of ZnO Thin Films Deposited at Low Temperatures

The Influence of CeO2on the Microstructure and Electrical Behaviour of ZnO–Bi2O3based Varistors

Effects of raw particle size and annealing on microstructure, electrical and mechanical behaviors of ZnO-based varistors

A New Method for Studying the Conduction Mechanism of ZnO-based Varistor Ceramics

Influence of Co2O3 doping on the microstructure and electrical properties of ZnO–Bi2O3-based varistors

Effect of Minor Bi2O3 Doping on the Microstructure and Electrical Nonlinearity of the ZnVSnO Based Varistor Ceramics

Effects of SiO2 and B2O3 on electrical properties of low-temperature sintered ZnO–Bi2O3 varistors

Effect of Co-Doping of Al3+, In3+, and Y3+ on the Electrical Properties of Zinc Oxide Varistors under Pre-Synthesizing BiSbO4

Influence of SnO2 on ZnO–Bi2O3–Co2O3 Based Varistor Ceramics

The Dependence of Sintering Temperature on Schottky Barrier and Bulk Electron Traps of ZnO Varistors

Effect of Bi 2O 3 doping on the electrical characteristics of Al-doped ZnO varistors with low residual voltage

Microstructure design and optimization of ZnO-Bi 2O 3-Sb 2O 3 based ceramic varistors

The origin of varistor property of SrTiO 3 -based ceramics

The Effect of DC degradation and heat-treatment on defects in ZnO varistor

Microstructure Design and Optimization of ZnO-Bi2O3-Sb2O3 Based Ceramic Varistors

The origin of varistor property of SrTiO3-based ceramics

The Role of Oxygen on Srtio3 Based Varistor Ceramics

Effect of Fabrication Conditions on I–V Properties for ZnO Varistor with High Concentration Additives by Sol–gel Technique

Impact of calcination on low-temperature sintered Bi2O3 varistors: Varistor properties and surge current absorption