Abstract:Rubber-toughened glassy polymers, researched as a prominent toolkit to fabricate high-performance plastics, are usually confronted with a great loss of tensile strength at the point of apparent yielding. Exploiting advanced plastic nanoalloys with high toughness and small stress difference (Delta sigma) between yielding and tensile platforms at high-strain levels is extremely being pursued yet challenging. Taking glassy poly(l-lactide) (PLLA) as an example, here, a viable and universal approach is discovered to elaborate supertoughened nanoalloys with significantly depressed yielding behaviors by virtue of elastomeric nanobelts to replace conventional rubber droplets in a glassy matrix by a simple reactive processing strategy. Stereocomplex crystal (SC)-immobilized EGMA, prepared by cocrystallization of enantiopure PDLA-/PLLA pairs respectively pregrafted onto EGMA chains, is used to toughen PLLA. Therefore, the structure of the elastomer, from droplets and shells to nanobelts in the PLLA matrix, can be achieved. Such controllable morphology allows for the corresponding nanoalloys with significantly enhanced notched impact strength (from 5.7 to 60.2 to 91.3 kJ/m(2)) and shortened Delta sigma (from 17.5 to 15.8 to 6.8 MPa). Furthermore, tricontinuous morphology integrates penetrative elastomeric nanobelts (EGMA), glassy polymers (PLLA), and SC phases, which are achieved by adjusting SC moieties. The authors demonstrate that the resulting nanoalloy integrates superior performance (toughness, heat resistance, and crystallization rate) and stress leveling-off without fully undergoing real yielding (Delta sigma = 1.4 MPa), surpassing most elastomer-toughened PLA alloys. The morphology development and underlying origin of the impact/deformation mechanism are elucidated. To our knowledge, this is the first time that the validity of such supertoughened glassy polymer alloys with significantly necking-suppressed deformation has been demonstrated. The versatile strategy can be further extended to arbitrary engineering plastics, including PET, PBT, and nylon, providing a paradigm in the development of advanced nanoalloys, which is quite challenging via existing industrial technologies.

Preparation of Novel Super-tough Poly(ethylene Terephthalate)engineering Plastic

Reactive extrusion of recycled poly(ethylene terephthalate) with polycarbonate by addition of chain extender

Upcycling discarded polyethylene terephthalate plastics into superior tensile strength and impact resistance materials with a facile one–pot process

Low temperature solid-state extrusion of recycled poly(ethylene terephthalate) bottle scraps

Preparation and Properties of Poly(Ethylene Terephthalate)/GF Toughened by Different Modifiers

Preparation and Properties of Poly(Ethylene Terephthalate)/Poly(Butylene Terephthalate) Alloys with High Toughness

Mutual Nucleating and Crystallization Behavior of Poly (ethylene Terephthalate)/polyamide 66 Blends

Effect of Poly(Acrylic Acid)-Modified Poly(Ethylene Terephthalate) on Improving the Integrated Mechanical Properties of Poly(Ethylene Terephthalate)/Elastomer Blend

Construction of Elastomeric Nanobelts in a Glassy Polymer Matrix: Toward Supertoughened Nanoalloys with Significantly Depressed Yielding Behaviors

Processing Poly (ethylene Terephthalate) Waste into Functional Carbon Materials by Mechanochemical Extrusion.

Application of Macromolecular Chain Extender and Contribution to the Toughening of Poly(Ethylene Terephthalate)

Facile Preparation of Rich Β-Transcrystallinity in PET Fiber/ipp Composites

Preparation of Branched and Crosslinked Poly(ethylene terephthalate)and Its Foaming Behavior

Super Toughened Poly(lactic acid)-Based Ternary Blends via Enhancing Interfacial Compatibility

Design of super-toughened, heat-resistant and antistatic polyethylene terephthalate-based blend composites by constructing a tenacious interface

Design of fully biodegradable super-toughened PLA/PBAT blends with asymmetric composition via reactive compatibilization and controlling morphology

Multi-network Reinforced Structure of PET/PC Alloys by Low Temperature Solid-state Reactive Blend

Crystallization and Mechanical Properties of Recycled Poly(ethylene terephthalate) Toughened by Styrene–Ethylene/Butylenes–Styrene Elastomer

Feasibility Study on the Fused Filaments of Injection-Molding-Grade Poly(Ethylene Terephthalate) for 3D Printing

Melt stretching and quenching produce low-crystalline biodegradable poly(lactic acid) filled with β-form shish for highly improved mechanical toughness

Enhancing the Toughness of Poly(lactic Acid) with a Novel, Highly Flexible and Biodegradable Polyester: Poly(ethylene Adipate-Co-terephthalate) Terephthalate