Abstract:In order to obtain a titanium-based PbO2 electrode with high electrocatalytic activity and good stability, A porous β-PbO2 electrode is prepared by electrodepositing on titanium substrate Sn-Sb-RuOx coating. The surface morphology and phase analysis of the porous β-PbO2 electrode prepared at different current density were investigated by SEM and XRD. Results showed that the current density changes the surface morphology and active surface area of the porous β-PbO2 electrode. When the current density is 2 A/dm2, the surface of the porous β-PbO2 prepared by electrodeposition has a uniform porous morphology with a pore diameter of 50-200 µm with main crystal phase of β-PbO2. Influence of current density on the electrochemical activity of the electrode was analyzed using anodic polarization curve, electrochemical impedance spectroscopy and galvanostatic polarization. Results revealed that with the increase of current density, the oxygen evolution potential of the porous β-PbO2 electrode decreases first and then increases while the exchange current density first increases and then decreases. When the current density is 2 A/dm2, the oxygen evolution potential is 2.0075 V(at 0.05 A/cm2) and the maximum exchange current density is 1.77×10-4 A/cm2. According to the electrochemical impedance spectroscopy, when the current density is 2 A/dm2, Qf and Qdl are the largest, Rf and Rct are the smallest, and the RF first increases and then decreases with the current density increases. When the current density is 2 A/dm2, the maximum RF value is 655.7. The results with galvanostatic polarization at current density of 0.05 A/cm2 showed that the electrode has a minimum electrode voltage of 2.05 V at a current density of 2 A/dm2. Accelerated life experiments were carried out in 2 g/L Cl- and 150 g/L H2SO4 bath at 25 °C, and the porous β-PbO2 electrode obtained under the current density of 2 A/dm2 has the longest life, and the electrode life is 68 h, which is 2.5 times of the PbO2 electrode obtained under the current density of 4 A/dm2.

Morphologic study of electrochemically formed lead dioxide

Beta-PbO micro-octahedrons synthesized by electrochemical reduction

Quick Fabrication of Evenly Porous PbO2 Through Potential Linear Increase Electrodeposition

Quick fabrication of evenly porous PbO 2 through potential linear increase electrodeposition

Morphology-Controllable Synthesis of CeO 2 on a Pt Electrode

Preparation And Characterization Of Pbo2 On Aluminum Substrate

Preparation and Characterization of Pbo2 Electrodes from Electro-Deposition Solutions with Different Copper Concentration

Mechanism for Electrodeposition of Lead Dioxide Coating on Stainless Steel Substrate

Tracking the Morphology Evolution of Nano-Lead Electrodeposits on the Internal Surface of Porous Carbon and Its Influence on Lead-Carbon Batteries

Fabrication and Electrochemical Treatment Application of an Al-Doped PbO2 Electrode with High Oxidation Capability, Oxygen Evolution Potential and Reusability

Effect of the Current Density on Electrodepositing Alpha-Lead Dioxide Coating on Aluminum Substrate

Study on the Effect of the Lead Dioxide Particles on the Anodic Electrode Performance for Ozone Generation

Effect of Current Densities on the Microstructure and Electrochemical Behavior of the Porous Β-Pbo2 Electrode

Controlled synthesis of quasi-single-crystal lead dioxide by polyvinylpyrrolidone for enhanced electrochemical ozone production

Facile Treatment Tuning The Morphology Of Pb With State-Of-The-Art Selectivity In Co2 Electroreduction To Formate

Effects of Fatty Alcohol Polyoxyethylene Ether AEO on PbO2Structure and Electrodeposition Behavior

Electrophoretic deposition of ZnCo2O4 spinel and its electrocatalytic properties for oxygen evolution reaction

Effect of temperature and current density on PbO2 composite electrodes

Preparation and characterization of titanium-based PbO2electrodes modified by ethylene glycol

Micro-area Investigation on Electrochemical Performance Improvement with Co and Mn Doping in PbO2 Electrode Materials

Fabrication and characterization of titanium‐based lead dioxide electrode by electrochemical deposition with Ti <sub>4</sub> O <sub>7</sub> particles