Abstract:Herein, MgO-12 % TiO2(w) ceramics with different contents of Bi2O3-CuO sintering aid were prepared using a solid-state method. The effects of the sintering aid content on the sintering temperature and the dielectric and mechanical properties of the ceramics were studied. The material was characterized using scanning electron microscopy and X-ray diffraction and Precision LCR tester and universal testing machine and Archimedes drainage method. When the Bi2O3-CuO content was less than 9 wt%, the ceramic sample has higher dielectric properties. When the Bi2O3-CuO content was greater than 9 wt%, the dielectric properties will deteriorate. This is because Bi2O3 participates in the chemical reaction between MgO and TiO2, forming a high dielectric loss Bi4Ti3O7 phase. At high temperatures, Cu2+ can easily change valence to Cu+, promoting oxygen vacancies and increasing dielectric loss in ceramic samples. The introduction of Bi2O3-CuO produces new MgTiO3, Mg2TiO4, and Bi4Ti3O12 phases in the sample structure, resulting in a structure in which the MgO grains in the sample are surrounded by the new phases that appear around them. This structure fills the pores, increases density, enhances mechanical properties. The dielectric properties of the ceramics were the when the sintering temperature was 1050 degrees C, and the Bi2O3-CuO content was 3 wt%. The dielectric constant and dielectric loss were 11.19 and 1.17 x 10-4, respectively. The bending strength of the ceramic sample increased from 138.72 MPa to 179.64 MPa when the Bi2O3-CuO content was increased from 3 wt% to 15 wt%. The Bi2O3-CuO sintering aid enables MgO to be better applied in ceramic substrates.

Effects of Sintering Assistants on Properties of Mg4Nb2O9 Microwave Dielectric Ceramics

Low-Temperature Sintering and Microwave Dielectric Properties of Mg4nb2o9 Ceramics

Effects of V_2O_5-Li_2CO_3 Co-Doped on the Sintering Behaviour and Microwave Dielectric Properties of Mg_4Nb_2O_9 Ceramics

Effects of sintering temperature and Ca substitution on microwave dielectric properties of Mg 3 V 2 O 8

Effects of additives on microstructures and microwave dielectric properties of ZnNb2O6 ceramics

The Sintering Behavior and Microwave Dielectric Properties of Mg_4Nb_2O_9/SrTiO_3 Composite Ceramic

Effect of B2O3 Doping on Microwave Dielectric Properties of (Zn0.5Mg0.5)Nb2O6 Ceramics

Effect of B2O3 on the Sintering and Microwave Dielectric Properties of M-phase LiNb0.6Ti0.5O3 Ceramics

The effect of sintering agents on the sinterability and dielectric properties of Li2Mg3TiO6 ceramics

Influence of calcining and sintering temperatures on microstructures and microwave properties in Bi2O3 and MnO2 co-doped [(Pb,Ca)La](Fe,Nb)O3 dielectric ceramics

Effect of BiVO4 on the Sintering and Dielectric Properties of MgTiO3 Ceramics

Low-Temperature Sintering and Microwave Dielectric Properties of Ba5Nb4O15 Ceramics Doped with Glass Sintering Aid

Effect of B_2O_3 Doping on Microwave Dielectric Properties of (Zn_(0.5)Mg_(0.5))Nb_2O_6 Ceramics

Influence of V substitutions on sintering behaviors and microwave dielectric properties of Ba4LiNb3O12 ceramic

Effect of V<sub>2</sub>O<sub>5</sub> Addition on the Microwave Dielectric Properties of Ba(Mg<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub> Ceramics

Effect of V2O5 Addition on the Microwave Dielectric Properties of Ba(Mg1/3Nb2/3)O3 Ceramics

Influence of ZnO and Nb 2O 5 additions on sintering behavior and microwave dielectric properties of (Mg 0.95Ca 0.05)TiO 3 ceramics

Effects of sintering parameters and Nd doping on the microwave dielectric properties of Y2O3 ceramics

Microstructure and microwave dielectric properties of ZnO-B2O3 doped ceramics

Low-temperature firing and microwave dielectric properties of MgTiO3 ceramics with Bi2O3–V2O5

Effects of Bi2O3–CuO Addition on the Dielectric Properties of MgO–TiO2(w) Ceramics Sintered at Low Temperatures