Effect of temperature and moving rate on purification of phosphoric acid by zone melting

LIU Xue-feng,LI Jun,LUO Jian-hong,CAO Yu-qing

DOI: https://doi.org/10.3969/j.issn.1005-9954.2013.04.009

2013-01-01

Abstract:Zone melting is an effective method for the preparation of high-purity material and can be used to prepare high-purity phosphoric acid.The effects of condensing and heating temperature,and the moving rate of melting zone on the zone melting process were studied.The results show that when the condensing temperature is 5 ℃ and the heating temperature is 65 ℃,the size of melting zone is suitable and the time of forming stable melting zone is 33 min.When the condensing temperature or heating temperature is too high,the zone gets larger apparently and the solidification interface is unsteady;when the condensing temperature or heating temperature is too low,the zone gets smaller or even disappears,and the crystal is acicular at the solidification interface.With the increase of moving rate,the removal efficiency of Cr,Ca,Mg,Zn,Al,Fe reduces in different degrees after zone melting.When the moving rate of melting zone v< 25 mm/h,the purification of the six impurities is effective,but it needs a long time in practice;when v> 25 mm/h,the removal efficiency of Cr,Ca,Zn reduces obviously.25 mm/h is the optimal moving rate of melting zone.