Parametric Optimization of Novel Process for Recovering Yellow Phosphorous Tail Gas to Produce Formic Acid

Bao-qing LIU,Yi-kun ZHANG,Jia-ling JIANG,Xing-hua LIN,Zhi-jiang JIN

DOI: https://doi.org/10.3969/j.issn.1003-9015.2013.04.027

2013-01-01

Abstract: In order to recover the yellow phosphorous tail gas to produce formic acid with high quality, an experiment was conducted to study the production of formic acid by the method of phosphoric acid acidification and vacuum distillation. The effects of mole ratio of reactants, formic acid additive content, reaction time, reaction temperature, agitation speed, distillation time and vacuum degree on product concentration and yield were studied. The experimental results show that, with increasing mole ratio of reagent, the product yield would increase significantly and the formic acid concentration has a little increase. The concentration and yield of product would decrease when less formic acid additive content was put in. As the reaction time is increased, the concentration and yield of formic acid are increased, especially when the reaction time is over two hours. Reaction temperature has little effect on the product concentration, whereas when reaction temperature increases, the product yield would increase at first and then decreases. The effects of agitation speed and distillation time on the concentration of formic acid are not obvious. At last, the preferred operating parameters were provided on the basis of product concentration priority, yield and efficiency consideration.