Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Design Study of Compact Cyclotron Magnet in Virtual Prototyping Environment

Multi-Structural Optimization of Bearingless Permanent Magnet Slice Motor Based on Virtual Prototype in Ansoft Maxwell

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Design and Test of Superconducting Magnet for 200 MeV Proton Cyclotron

Design and Optimization of a Hybrid Excitation System for Magnetically Driven Rotating DC Arc Plasma Generators

Axial Magnetic Field Distribution Simulation and Optimization in Rotating Magnetron Sputtering System

Design and Construction of the Main Magnet for a 230-MeV Superconducting Cyclotron

Design Study of Combined Magnet with Combined Function Method

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Cyclotrons: Magnetic Design and Beam Dynamics

Modelling and design of permanent magnet multipoles for beam transport and focusing. I. Selection of optimal design and parameters

Design of A Permanent Quadrupole Magnet with Adjustable Magnetic Field Gradient

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

Permanent-magnet Quadrupoles for an Interdigital H-mode Drift Tube Linear Accelerator: Optimization Code and Adjustable Magnet Design

Start-to-end Modeling and Transmission Efficiency Optimization for a Cyclotron-Based Proton Therapy Beamline

Accurate magnetization modeling in multi-dimensional applications

Design of a Compact Magnets System for a Hybrid 2.45 GHz Microwave 7li3+ Ion Source

Modelling and design of permanent magnet multipoles for beam transport and focusing. II. Configuring the quad

PIC Simulation of the Coaxial Magnetron for Low Energy X-band Linear Accelerators

A General Model for Simulating the Quench Behavior of Canted-Cosine-theta (CCT) Quadrupole Magnets

Optimized Design and Electromagnetic-Thermal- Mechanical Analysis of a Toroidal D-Shaped Superconducting Magnet in 5 MW LIQHY-SMES System