Abstract:Continuous damage accumulation resulting from void nucleation, growth, and coalescence leads to the final ductile fracture. The Gurson–Tvergaard–Needleman (GTN) model and its extensions, which model these mechanisms, are famous coupled constitutive models for predicting material failure. In this study, the GTN model was extended by incorporating two different damage variables: void volume fraction and shear damage; this was done to describe damage accumulation and ductile fracture under a wide range of stress states from compression-dominated to tension-dominated ones. The shear damage was composed of the shear void nucleation related to secondary voids and shear deformation damage. In addition, the shear void nucleation and void closure effect resulting from compression deformation were introduced to model the change in void volume under different loading conditions. The Lode angle dependence function was updated to express the various stress states and competition mechanism between two damage variables. Furthermore, the effective damage and its incremental form was used to define the extent of damage accumulation and fracture initiation. Subsequently, the proposed model was implemented in finite element software through user subroutines, and three distinct experiments related to high, low, and negative stress triaxiality were performed to calibrate the model parameters by the inverse analysis method for 1045 steel and 2024-T351 aluminum alloy. The experimental results under proportional and path-changing loading conditions were used to analyze the damage evolution and validate the proposed model. The good agreement between the numerical prediction and experimental results for the displacement and location at fracture, indicates good predictive ability of formulated model under arbitrary loading conditions.

Influence of GTN Meso-Damage Model Parameters on Sheet Forming Damage Behavior

Comparison of GTN Damage Models for Sheet Metal Forming

The GTN damage model based on Hill’48 anisotropic yield criterion and its application in sheet metal forming

DUCTILE DAMAGE ANALYSIS FOR FRACTURE IN SHEET METAL FORMING BASED ON GTN MESOSCOPIC DAMAGE MODEL

Numerical simulation of incremental sheet forming based on GTN damage model

GTN Poroplastic Damage Model Construction and Forming limit prediction of Magnesium Alloy Based on BP-GA Neural Network

Forming Limit Stress Diagram Prediction of Pure Titanium Sheet Based on GTN Model

Modeling of metallic shear failure by void-based meso-damage model

GTN MESO-DAMAGE MODEL BASED ON DIFFERENT HARDENING RULES AND ITS APPLICATION FOR SPRINGBACK FINITE ELEMENT ANALYSIS IN SHEET METAL FORMING

Mesoscopic Damage Mechanical Analysis for Uniaxial Tension of Automobile Galvanized Steel Sheet Specimens

Numerical Simulation and Defect Prediction of Forming Process for Aluminum Alloy Sheets Considering the Effect of Both Anisotropy and Lode Parameter

Anisotropic Gurson-Tvergaard-Needleman model considering the anisotropic void behaviors

Investigation of the Effect of Forming Parameters in Incremental Sheet Forming Using a Micromechanics Based Damage Model

Size Effect on the Damage Evolution of a Modified GTN Model under High/low Stress Triaxiality in Meso-Scaled Plastic Deformation

Parameter Calibration for a Shear Modified GTN Model and Its Application to Forming Limit Prediction

Parameters Determination of GTN Model and Damage Analysis of Aluminum Alloy 6016 Sheet Metal

Extended Gurson-Tvergaard-Needleman model considering damage behaviors under reverse loading

Damage Parameters Identification of Dual-Phase 800 Steel Based on Microvoids Analysis and Response Surface Methodology

Extended GTN Model for Predicting Ductile Fracture under a Broad Range of Stress States

A Combined Experimental and Numerical Study on the Plastic Damage in Microalloyed Q345 Steels

Tearing Failure of Ultra-Thin Sheet-Metal Involving Size Effect in Blanking Process: Analysis Based on Modified GTN Model