Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Study on Two-Dimensional Dense Gas-Solid Flow Swirling Particle Concentration Field in Gasifier with Single Nozzle

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

FLOW FIELD SIMULATIONS AND EXPERIMENT OF IMPROVED AIR SUPPLY UNITS FOR UPDRAFT-BIOMASS GASIFIER

Numerical Simulation for Effects of Venturi Tube on Swirling Flow Field

Numerical Simulation of GSP Gasifier under Different Swirl Angles

Experimental study on cold two-phase flow in swirl burner exit

Research on motion characteristics of gas-solid jet flow

POD and DMD Analysis of Dynamic Flow Structures in the Recirculation Region of an Unconfined Swirl Cup

Experimental studies on gas-particle flows in a swirl burner by PDPA measurements

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Numerical Simulation of the Gas Flow Field from a Triple Channel Coal-Water Slurry Gasifier Nozzle

Experimental study on the effect of particle size on the exit flow field of a swirl burner

Experimental Study of Particle-Laden Turbulent Reacting Flow in a Swirl Combustor

Experimental study on combustion flow field characteristics of swirl combustor

In-situ study on flow and rotation behaviors of coal particles near the burner plane in an impinging entrained-flow gasifier

Experimental Measurement of Gas-Solid Two-Phase Flow of a Swirl Burner by Optical Wave Method

A review for measurements and simulations of swirling gas-particle flows

Numerical Simulation of Gas-Particle Flows with Different Swirl Numbers in a Swirl Burner

Effect of Swirl Field on the Fuel Concentration Distribution and Combustion Characteristics in Gas Turbine Combustor with Cavity

Numerical studies of gas-solid flow behaviors and wall wear in a swirling fluidized bed

Numerical Investigation of Confined Swirling Gas-Solid Two Phase Jet