Abstract:In the preparation process of c-Si solar cells, qualified Si wafers must be processed through mechanical processing during manufacturing. Most of these processes involve mechanical processing, which inevitably results in severe mechanical damage layers and a wafer surface with large roughness. The current industry practice involves etching of the damage layer using an acid/alkali solution, and it is usually followed by deposition of additional passivation layers in the subsequent processes. However, even with these treatments, there still remain non-negligible microscopic saw damage and scratches on the wafer surface, which hinder the urgent development of a higher conversion efficiency of solar cells. Here, we provide a simple method to effectively suppress the impact of this surface damage. UV-OZONE treatment, which involves generation of an oxide layer and subsequent cleaning with hydrofluoric acid, leads to the effective regain of solar cell performance due to the passivation of dangling bonds and removal of sharp microstructures based on the creation of mechanical scratches. In addition, PEDOT:PSS/n-Si solar cells were prepared to exploit their strong surface dependence to investigate the effect of scratches on the overall performance. These results further validate the impact of scratches on solar cells, and a simple and effective method for surface damage suppression is provided.

Application of the Electrochemical Cleaning Method Before Solar Texturing of Solar Cells

Electrochemical Oxidation Pre-Treatment for Wet Texturing of Monocrystalline Silicon Solar Cells

Investigation of Texturing Industrial Mono-Crystalline Silicon Solar Cells

Study on the Removal of Impurities in Silicon by Electrorefining

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

Investigation of Texturization for Monocrystalline Silicon Solar Cells with Different Kinds of Alkaline

Eliminating Deep Ditches on Textured Multi-crystalline Silicon Surfaces

Research of Texturization on Multi-crystalline Silicon Surface for Solar Cell

A Continuous, Single-Face Wet Texturing Process for Industrial Multicrystalline Silicon Solar Cells Using a Surfactant Treated Photoresist Mask

Constructing Submicron Textures on Mc-Si Solar Cells Via Copper-Catalyzed Chemical Etching

Acid Texturing of Large Area Multi-Crystalline Silicon Wafers for Solar Cell Fabrication

A Metal-Free Additive Texturization Method Used for Diamond-Wire-sawn Multi-Crystalline Silicon Wafers

Formation of Nanostructured Emitter for Silicon Solar Cells Using Catalytic Silver Nanoparticles

Comprehensive Study of Sf6/O-2 Plasma Etching for Mc-Silicon Solar Cells

A Simple Texturization Approach for Mono-Crystalline Silicon Solar Cell with Low Tmah Concentration Solution

UV-OZONE Treatment for Suppressing Surface Damages on Silicon Solar Cells

TEXTURIZATION OF MONOCRYSTALLINE SILICON FOR SOLAR CELLS

Metal-catalyzed chemical etching using DIO3 as a hole injection agent for efficient submicron-textured multicrystalline silicon solar cells

Aqueous HF-(HCl)-Cl2 Mixtures for Saw-Damage Removal and Spray Texturing of Monocrystalline Silicon Solar Cells

A high efficiency industrial polysilicon solar cell with a honeycomb-like surface fabricated by wet etching using a photoresist mask

Optimization of Si wafer chemical cleaning process