Abstract:Joint size effects on interfacial intermetallic compound (IMC) morphology, shear performance, and fracture behavior of micro-scale ball grid array (BGA) structure Cu/Sn–3.0Ag–0.5Cu/Cu (Cu/SAC305/Cu) joints under coupled electromechanical loads are investigated systemically by combined experimental characterization, theoretical analysis, and finite element simulation. Results show that the decreasing joint size (standoff height) brings about increase in grain size of interfacial Cu6Sn5 grains and change in morphology of the grains from rod-like to scallop-like. Decreasing standoff height also leads to an initial increase and then a decrease in shear strength of joints subjected to coupled electromechanical loads, and imposing electric current stressing on shear stress causes a significant decrease in shear strength of the joints. Current crowding appears at the interfaces near the electron entry and exit corners of the joints, and the localized maximum current density in large joints with rough solder/IMC interface is higher than that of small joints. There is a distinct size effect on fracture mode and facture path of BGA joints under coupled electromechanical loads. For large joints, the crack initiates and propagates simultaneously at the interfaces on both cathode and anode sides, and fracture is more likely to take place by a brittle mode mainly along the solder/IMC interface on both sides; while for small joints, the crack preferentially initiates and propagates at the interface on the cathode side, leading to final fracture occurring mainly on the cathode side and partially on the anode side. This study provides a better understanding on the shear performance and fracture behavior as well as the underlying mechanism of BGA solder joints with different sizes, thereby being highly significant for reliability assessment and lifetime prediction of BGA packages.

Effect of Micro-Solder Joint Structure Parameters on Its Thermal Stress in WLCSP

Board Level Wlcsp 3d Thermal Stress Analysis By Submodeling Of Fea

Simulation and Experimental Analysis of Thermomechanical Stress Around Interconnects for W2W Hybrid Bonding

Effect of Thermal Shock Profile on Solder Joint of WLCSP

Dynamic Substructure Method for Prediction of Solder Joint Reliability of IC Package under Drop Test

Actuality and Development of Fatigue Models of Solder Joints in Micro-Electronic Packaging

Influence of Under-Bump Metallurgy and Solder Alloys on the Crack in the Wafer Level Chip Scale Packaging

The Microstructure And Shear Behaviors Of The Solder Joints With Decreasing Diameter In Wlcsp

Evaluation of Design Parameters for Leadless Chip Resistors Solder Joints

Research on the reliability of Micro LED high-density solder joints under thermal cycling conditions

Numerical investigation of solder joint shape for micro-spring package during vacuum vapor phase soldering

Improvement of Thermo-Mechanical Reliability of Wafer-Level Chip Scale Packaging

Solder joints stress analysis and optimization of chip component under shear and tensile load based on orthogonal experimental design and gray correlation analysis

Interfacial Crack Effect on Thermal Mechanical Behavior of Solder Bump for Flip-Chip Package: A Numerical Analysis

The Influence of Solder on the Thermal Stress in a FCOL Device

The effect of residual stress on the flexing strength of PCB assembly

The Geometrical Effects in A Model Coupled with Microstructural Evolution and Mechanical Behavior for Small-Scale Solder Joints

Reliability and Simulation of Composite BGA Solder Joint Connecting LTCC Substrates

The role of microstructure in the thermal fatigue of solder joints

The effects of the decreasing joint size on interfacial microstructure and shear behavior of micro-scale BGA structure Cu/Sn–3.0Ag–0.5Cu/Cu joints under coupled electromechanical loads