Abstract:Tris(8-hydroxyquinoline) aluminum (Alq3) based organic light emission diodes (OLED) have been a focus of material research in recent years. One of the key issues in searching for a better device performance and fabricating conditions is suitable electron-injection materials. We have investigated the energy alignment and the interface formation between different metals and Alq3 using X-ray and ultraviolet photoelectron spectroscopy (XPS and UPS). The interface is formed by depositing the target cathode material, such as Ca, Al or Al/LiF, onto an Alq3 film in a stepwise fashion in an ultrahigh vacuum environment. While the UPS results show the work function and vacuum level changes during interfaces formation, implying a possible surface dipole layer, XPS results show a more detailed and complex behavior. When a low work function metal such as Ca is deposited onto an Alq3 surface, a gap state is observed in UPS. At the same time, a new peak can be observed in the N 1s core level at a lower binding energy. These results can be characterized as charge transfer from the low work function metal to Alq3. The shifting of core levels are also observed, which may be explained by doping from metal atoms or charge diffusion. These interfaces are drastically different than the Al/Alq3 interface, which has very poor electron injection. At the Al/Alq3 interface there is a destructive chemical reaction and much smaller core level shifts are observed. Based on detailed analysis, energy level diagrams at the interface are proposed.

Internal Electric Field in Tris-(8-hydroxyquinoline)aluminium (alq) Based Light Emitting Diode

Study of Organic Electrolumenescent Thin Film Cell

Internal Field Distribution in Organic Light Emitting Diodes with Double Layer Structure

Direct Probing of Carrier Behavior in Electroluminescence Indium–Zinc-Oxide/N,N '-Di-[(1-naphthyl)-n,n '-Diphenyl]-(1,1'-biphenyl)-4,4'-diamine/tris(8-hydroxy-quinolinato)aluminum(iii)/lif/al Diode by Time-Resolved Optical Second-Harmonic Generation

Electric Field-Induced Hole Injection-Enhanced Photoluminescence in A N,N '-Bis(3-methylphenyl)-n,n '-Bis(phenyl)-benzidine-based Emitter

Emission Characteristics Of Organic Light-Emitting Diodes With A Heterostructure Of Dye Doped Poly(N-Vinyl Carbazole)/Tris(8-Hydroxyquinoline) Aluminum

The Influence of Exciton Behavior on Luminescent Characteristics of Organic Light-Emitting Diodes

Two Peaks Observed in the Electroluminescence Spectra of Alq(3)-Based Oleds

Investigation of Energy Transfer and Charge Trapping in Dye-Doped Organic Light-Emitting Diodes by Magneto-Electroluminescence Measurement

Trap States in Doped Tris-8-(Hydroxyquinoline) Aluminum Using Thermally Stimulated Luminescence

[Performance Dependence of Organic Light-Emitting Devices on the Thickness of Alq3 Emitting Layer].

Electric field effect on luminescence efficiency in 8-hydroxyquinoline aluminum (Alq3) thin films

Emission Spectra Dependence on Voltage and Emissive Layer Layout in Organic Light-Emitting Diodes

Luminescent Enhancement of Heterostructure Organic Light-Emitting Devices Based on Aluminum Quinolines

Photoelectron Spectroscopy Study of the Interactions Between Erf3 Dopants and Alq(3) Hosts for Near-Infrared Organic Light-Emitting Diodes

Study on Temperature Characteristics of Organic Light-Emitting Diodes Based on Tris-(8-hydroxylquinoline)-aluminum

First-principle band structure calculations of tris(8-hydroxyquinolinato)aluminum.

Does Tris-(8-Hydroxyquinolinato)Aluminum Transport Holes?

Energy Level Alignment at the Metal/Alq3 Interfaces Investigated with Photoemission Methods

White Light Emission From Exciplex Using Tris-(8-Hydroxyquinoline)Aluminum As Chromaticity-Tuning Layer

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices