Abstract:The elastic properties of 1D nanostructures such as nanowires are often measured experimentally through actuation of the nanowire at its resonance frequency, and then relating the resonance frequency to the elastic stiffness using elementary beam theory. In the present work, we utilize large scale molecular dynamics simulations to report a novel beat phenomenon in [110] oriented Ag nanowires. The beat phenomenon is found to arise from the asymmetry of the lattice spacing in the orthogonal elementary directions of the [110] nanowire,i.e., [-110] and [001] directions, which results in two different principal moments of inertia. Because of this, actuations imposed along any other direction are found to decompose into two orthogonal vibrational components based on the actuation angle relative to these two elementary directions, with this phenomenon being generalizable to <110> FCC nanowires of different materials (Cu, Au, Ni, Pd and Pt).The beat phenomenon is explained using a discrete moment of inertia model based on the hard sphere assumption, the model is utilized to show that surface effects enhance the beat phenomenon, while the effect is reduced with increasing nanowires cross-sectional size or aspect ratio.Most importantly, due to the existence of the beat phenomena, we demonstrate that in resonance experiments only a single frequency component is expected to be observed, particularly when the damping ratio is relatively large or very small.Furthermore, for a large range of actuation angles, the lower frequency is more likely to be detected than the higher one,which implies the experimental predictions of Young's modulus obtained from resonance may in fact be under predictions. The present study therefore has significant implications for experimental interpretations of Young's modulus as obtained via resonance testing.

Atomic-resolution Three-Dimensional Force and Damping Maps of Carbon Nanotube Peapods

Atomically Resolved Mechanical Response of Individual Metallofullerene Molecules Confined Inside Carbon Nanotubes.

Beat Phenomena in Metal Nanowires, and Their Implications for Resonance-Based Elastic Property Measurements.

Carbon Nanotube Peapods Under High-Strain Rate Conditions: A Molecular Dynamics Investigation

The Influence of Electro-Mechanical Effects on Resonant Electron Tunneling Through Small Carbon Nano-Peapods

Effects of Tip-Nanotube Interactions on Atomic Force Microscopy Imaging of Carbon Nanotubes

Revealing the Mechanism Underlying 3D‐AFM Imaging of Suspended Structures by Experiments and Simulations

Visualization of Nanomechanical Mapping on Polymer Nanocomposites by AFM Force Measurement

Structural and functional imaging with carbon nanotube AFM probes

Computational local stiffness analysis of biological cell: High aspect ratio single wall carbon nanotube tip

Nanomechanics of Polyphenylacetylene Derivatives by AFM-based SMFS

Atom-Resolved Imaging of Carbon Hexagons of Carbon Nanotubes

Micro-mechanical Analysis of Dynamic Processes of Nanomanipulation

Ultrasensitive force detection with a nanotube mechanical resonator

Carbon nanotubes adhesion and nanomechanical behavior from peeling force spectroscopy

Control of Length and Spatial Functionality of Single-Wall Carbon Nanotube AFM Nanoprobes

A local field emission study of partially aligned carbon-nanotubes by AFM probe

Nanoscale imaging of Gilbert damping using signal amplitude mapping

Heterodyne High-Harmonic Electrostatic Force Microscopy with Improved Spatial Resolution for Nanoscale Identification of Metallic/Semiconducting Carbon Nanotubes

Mapping Nanoscale Electromagnetic Near-Field Distributions Using Optical Forces

Intramolecular Force Mapping at Room Temperature