Abstract:Probe is a key part of atomic force microscopy (AFM) and the curvature radius of its tip limits the lateral resolution. Furthermore, as an expendable, its life has a direct effect on operation cost. Single-walled carbon nanotubes (SWNTs) are ideal materials for the probe tips used in atomic force microscopy (AFM), since they have intrinsically small diameters, high aspect ratios and unique wearability. Herein, the fabrication of AFM SWNT tips is systemically investigated, including mechanical method and direct growth method. In the former, substrates with isolated SWNTs are first prepared by chemical vapor deposition and then scanned with conventional silicon probes under AFM. During scanning, SWNTs can be picked up from substrates and attached to the pyramid of silicon probes via attractive Van del Waals forces. Preparation of substrates is decisive to this method, since only the SWNTs disengaged from surface are possible to pick up. Different substrates have been compared and the results show that the substrates full of gaps are prior to the planar ones. SWNTs are suspended across gaps and suitable to the following assembly. The mechanical method is easily implemented and can produce AFM SWNT tips one by one, while the direct growth method is promising to manufacture them in a large scale, in spite of more difficulty. In the latter, catalyst for the growth of SWNTs is directly placed on individual commercial probes or pyramid arrays. Through chemical vapor deposition, grown SWNTs protrude from the original tips and create new ones. Due to the random orientation of SWNT growth, the yield of successful SWNT tips is generally low for the direct growth method. In this article, Electric filed is used to direct the growth orientation of SWNTs during chemical vapor deposition. Both electrodes are located in the furnace to apply a static electric field along the pyramid axis during growth. The intensity can be varied from 0.1V/um to IV/um, and the direction is towards the surface of wafers. The growth of SWNTs is oriented by electric field and the yield of SWNT tips is raised. The AFM SWNT tips derived from the above two methods have been utilized to image Au layers in the tapping mode. Compared with conventional silicon probes, SWNT tips are longer lasting to keep a high resolution.

Carbon nanotubes adhesion and nanomechanical behavior from peeling force spectroscopy

Deformation of Nanotubes in Peeling Contact with Flat Substrate: an in Situ Electron Microscopy Nanomechanical Study

Adhesion energy of single wall carbon nanotube loops on various substrates

Assessing MWCNT-graphene Surface Energy Through in Situ SEM Peeling

In Situ Scanning Electron Microscope Peeling to Quantify Surface Energy Between Multiwalled Carbon Nanotubes and Graphene.

A Study of Mechanical Peeling Behavior in A Junction Assembled by Two Individual Carbon Nanotubes

Molecular Dynamic Simulation Study of AFM Single-Wall Carbon Nanotube Tip-Surface Interactions

A numerical-experimental approach towards picomechanics and picotribology: the case study of defective carbon nanotubes bundles

Adhesion, Friction and Wear on the Nanoscale of Mwnt Tips and Swnt and Mwnt Arrays

Steered Molecular Dynamics Simulations on the Peeling and Shearing of Carbon Nanotubes on a Silicon Substrate

Control of Length and Spatial Functionality of Single-Wall Carbon Nanotube AFM Nanoprobes

Investigation of the Interaction Between Carbon Nanotube Tip and Silicon Sample Through Molecular Dynamic Simulation

In situ measurements on individual thin carbon nanotubes using nanomanipulators inside a scanning electron microscope

Micro-mechanical Analysis of Dynamic Processes of Nanomanipulation

Toward the Chemistry of Carboxylic Single-Walled Carbon Nanotubes by Chemical Force Microscopy

Molecular-Level Engineering of Adhesion in Carbon Nanomaterial Interfaces

Investigating Interfacial Contact Configuration and Behavior of Single-Walled Carbon Nanotube-Based Nanodevice with Atomistic Simulations

Fabrication of AFM Single-Walled Carbon Nanotube Tips

A Quantitative Approach to Study the Interface of Carbon Nanotubes/elastomer Nanocomposites

Probing Mechanical Properties of Carbon Nanotubes by Light Scattering

Quantitative nanomechanical characterization of the van der Waals interfaces between carbon nanotubes and epoxy