Abstract:The present study proposes a thermomechanical surface contact finite element formulation for studying interfacial heat conductance in correlation to micromechanical contact forces. The proposed methodology is applied for modeling heat surface conductivity of Carbon Nanotubes (CNT). The atomic lattice of CNTs is initially modeled using the molecular structural mechanics approach and reduced to an equivalent 2D continuum element. The equivalent 2D continuum element is used as a robust and efficient surrogate model for the construction of full length CNTs in contact. Coupled structural and heat pde's have been used to describe the corresponding thermomechanical problem which are discretized using 2D quadrilateral finite elements, along with surface contact elements based on the Node to Node and Node to Segment formulations. The problem has been treated as a nonlinear steady state problem and solved in the frame of a Newton-Raphson incremental-iterative scheme. Extensive sensitivity analysis was performed with respect to several influencing parameters, such as initial contact angle, boundary conditions and CNT overlapping. Based on this analysis, the effect of overlapping and approaching angle on the total heat exchange was quantified. It has been demonstrated that in most cases, increasing the total contact force can produce an almost linear increase in heat exchange. However, in cases of small approaching angles between CNTs an extensive contact force could heavily deform the contacting geometries producing a non-linear heat exchange mechanism.

A numerical-experimental approach towards picomechanics and picotribology: the case study of defective carbon nanotubes bundles

Coupled Thermomechanics Of Single-Wall Carbon Nanotubes

Numerical Exploration Of The Defect'S Effect On Mechanical Properties Of Nanowires Under Torsion

Deformation of Nanotubes in Peeling Contact with Flat Substrate: an in Situ Electron Microscopy Nanomechanical Study

A Study of Mechanical Peeling Behavior in A Junction Assembled by Two Individual Carbon Nanotubes

Carbon nanotubes adhesion and nanomechanical behavior from peeling force spectroscopy

Steered Molecular Dynamics Simulations on the Peeling and Shearing of Carbon Nanotubes on a Silicon Substrate

A Study on Mechanism of Tribological Behavior of Carbon Nanotubes

Thermomechanical analysis of the effect of contact forces in heat conduction of composite materials through multiscale contact finite element modeling

Micro-mechanical Analysis of Dynamic Processes of Nanomanipulation

Defect engineering of carbon nanotubes and its effect on mechanical properties of carbon nanotubes/polymer nanocomposites: A molecular dynamics study

Carbon Nanotubes: Atomistic Investigation of Load Transfer Between DWNT Bundles “crosslinked” by PMMA Oligomers (adv. Funct. Mater. 15/2013)

Quantitative nanomechanical characterization of the van der Waals interfaces between carbon nanotubes and epoxy

A micromechanical study of the fatigue behavior of MWCNT-modified carbon fibers/epoxy resin single filament composites subjected to cyclic loadings

Direct nanomechanical characterization of carbon nanotube - titanium interfaces

A molecular dynamics study on the mechanical properties of defective CNT/epoxy nanocomposites using static and dynamic deformation approaches

The Deformations of Carbon Nanotubes under Cutting.

Enhancement of Friction between Carbon Nanotubes: An Efficient Strategy to Strengthen Fibers

Analysis of A Microelectromechanical System Testing Stage for Tensile Loading of Nanostructures

A study on the effect of defects on the buckling of double-walled carbon nanotubes under compression based on a new atomic-continuum coupling method