Abstract:Top left: TEM image of a helical carbon nanotube, Top right: mechanical behavior of 1% SCNT and 1% HCNT epoxy nanocomposite, Bottom: observed deformation and failure patterns. This paper is aimed at an experimental investigation of the effect of straight and helical carbon nanotubes on the compressive behavior of epoxy nanocomposites. The epoxy nanocomposites are fabricated with varying levels of SCNT and HCNT, each with two different fabrication techniques viz. high shear mixing and ultrasonication. In samples made using high shear mixing, the compressive strength is found to actually decrease, due to poor dispersion of the CNTs, resulting in voids and clumps, which can adversely affect the strength. Ultrasonic homogenization is found to better disperse the CNTs within the epoxy resin with nearly a 10‐fold decrease in the heterogeneity size. Compression tests conducted on the ultrasonically homogenized CNT‐epoxy nanocomposites indicate a modest increase in the compressive strength. The best increase of 5% is obtained with 1% SCNT. On the other hand, the HCNT samples show a higher post‐peak residual stress suggesting an improved mode II/III fracture toughness. The high shear mixed samples exhibit a bulging deformation with no clear evidence of shear localization. On the other hand, the ultrasonic homogenization (UH) samples bulge and eventually show a clear localized shear band, likely due to a smaller heterogeneity size. Some samples with relatively poor dispersion exhibit an axial splitting failure and a comparatively low compressive strength. In addition, it is demonstrated that using acetone as a solvent during dispersion can affect the curing kinetics, which results in a nanocomposite with a rubbery consistency with low stiffness and strength, but high deformability. Highlights Straight and helical CNTs impact the compressive behavior of epoxy nanocomposites High shear mixing reduces compressive strength due to poor CNT dispersion Ultrasonication improves CNT dispersion but modest rise in compressive strength HCNTs cause higher post‐peak residual stress suggesting higher toughness Using acetone affects curing, leading to rubbery, deformable nanocomposites.

A molecular dynamics study on the mechanical properties of defective CNT/epoxy nanocomposites using static and dynamic deformation approaches

Molecular Dynamics Study Of Dynamic Buckling Properties Of Nanowires With Defects

Atomistic Exploration of Deformation Properties of Copper Nanowires with Pre-Existing Defects

Poly(methyl Methacrylate)-Decorated Single Wall Carbon Nanotube/epoxy Nanocomposites with Re-Agglomeration Networks: Rheology and Viscoelastic Damping Performance

Influence of Inter-tube Connections on the Stress-Strain Behavior of Nanotube-Polymer Composites: Molecular Dynamics

Effects of defects and functional groups on graphene and nanotube thermoset epoxy-based nanocomposites mechanical properties using molecular dynamics simulation

Numerical Exploration Of The Defect'S Effect On Mechanical Properties Of Nanowires Under Torsion

Defect engineering of carbon nanotubes and its effect on mechanical properties of carbon nanotubes/polymer nanocomposites: A molecular dynamics study

Simulation of Static and Dynamic Mechanical Characteristics of Carbon Nanotubes and Carbon Nano-Peapods with Defects

The Controllable Mechanical Properties of Coiled Carbon Nanotubes with Stone–Wales and Vacancy Defects

Molecular dynamics simulations of thermodynamics and shape memory effect in CNT-epoxy nanocomposites

Compressive behaviors and deformation mechanism of carbon fiber reinforced epoxy composites: A microscopic and molecular dynamics perspective

Molecular Dynamics Simulation for the Analysis of Mechanical Properties and Effect of Stone-Wales and BiVacancy Defect on Carbon Nanotube Reinforced Iron Composites

The effect of carbon nanotubes loading and processing parameters on the electrical, mechanical, and viscoelastic properties of epoxy-based composites

Experimental investigation of the compressive behavior of epoxy nanocomposites reinforced with straight and helical carbon nanotubes

Static and dynamic mechanical properties of polydimethylsiloxane/carbon nanotube nanocomposites

Microstructural design and mechanical performance of epoxy/carbon nanotube fiber composite

Molecular Dynamics Analysis of Surface-Modified Carbon Nanoparticle Reinforced Epoxy Resin

A Semi-analytical and Experimental Approach Using Molecular Dynamic Simulation for Thermo-mechanical Properties of Surface Functionalized Epoxy/Polyurethane/MWCNT/ZnMoO4 Nanocomposites

Effect of Stone-Wales Defect on Mechanical Properties of Gr/epoxy Nanocomposites

Deformation mechanism of MWCNT/Ni composites under shear deformation: A molecular dynamics study