Abstract:As communication technology continues to evolve, 5G technology is becoming more mature, and 6G technology is steadily advancing. Microwave equipment is moving toward high frequency, miniaturization, low loss and high temperature stability, and microwave dielectric ceramics have been deeply applied in this field. To elevate the Q × f value of CoNb2O6 system, Ta5+ was introduced into CoNb2O6, and CoNb2‐xTaxO6 (0.0 ≤ x ≤ 0.8) ceramics were prepared by the traditional solid‐phase method. By X‐ray diffraction, it was observed that at x = 0.8, in addition to a single niobium ferrite phase, information of tantalate phase also appeared. Raman spectral detection and group theory analysis indicate that Ag(2) and Ag(3) modes are the dominant Raman vibrations at ≈873 cm−1. Furthermore, the polarization rate affects the εr value, and the bond energy of Nb/Ta‐O and the recovery force characterized by the average deformation of the [Nb/TaO6] octahedron are the key elements influencing the temperature coefficient of the resonance frequency (τf). The internal strain, ordered induced size, and chemical bonding valence of ionic valence states are the key factors that can increase the Q × f value. Moreover, the introduction of ions with lower electronegativity leads to an enhanced electronic compensation of oxygen vacancies, which also reduces the dielectric loss. This paper enriches the theory related to low dielectric loss and shows that CoNb1.8Ta0.2O6 (εr = 21.4832, Q × f = 100723 GHz, τf = ‐61.38 ppm/°C) ceramics with superior microwave dielectric properties are expected to be used in wireless communication devices.

Ag(Nb,Ta)O3-based ceramics with suppressed temperature dependence of permittivity

Unique Dielectric Tunability Of Ag(Nb1-Xtax)O-3 (X=0-0.5) Ceramics With Ferrielectric Polar Order

The Microstructure, Dielectric Abnormalities, Polar Order and Microwave Dielectric Properties of Ag(Nb1−xTax)O3 (x = 0–0.8) Ceramics

High energy density in Ag0.5Na0.5(Nb1-xTax)O3 antiferroelectric ceramics

High Energy Density in Ag 0.5 Na 0.5 (nb 1-X Ta X )O 3 Antiferroelectric Ceramics

Low-Temperature Firing And Microwave Dielectric Properties Of Ca[(Li0.33nb0.67)(0.9)Ti-0.1]O3-Delta Ceramics With Lif Addition

Nb-doped BaTiO3-(Bi0.5Na0.5)TiO3ceramics with Core-Shell Structure for High-Temperature Dielectric Applications

Colossal Dielectric Permittivity in (al+nb) Co-Doped Ba0.4Sr0.6TiO3 Ceramics

Lead free dielectric ceramic with stable relative permittivity of 0.90(Na0.50Bi0.50Ti)O3-0.10AgNbO3

High Energy Storage Density and Efficiency with Excellent Temperature and Frequency Stabilities under Low Operating Field Achieved in Ag0.91Sm0.03NbO3-modified Na0.5Bi0.5TiO3-BaTiO3ceramic S

High Permittivity and Low Loss Dielectric Ceramics in the BaO–La2O3–TiO2–Ta2O5 System

Enhanced energy storage density in Ca and Ta co‐doped AgNbO 3 antiferroelectric ceramics

Nb-doped 0.9 BaTiO 3-0.1(Bi 0.5Na 0.5) TiO 3ceramics with stable dielectric properties at high temperature

Unique dielectric tunability of Pb<sub>0.99</sub>[(Zr<sub>0.6</sub>Sn<sub>0.4</sub>)<sub>0.94</sub>Ti<sub>0.06</sub>]<sub>0.98</sub>Nb<sub>0.02</sub>O<sub>3</sub> antiferroelectric ceramics

Structural and Dielectric Characterization of Ba4Nd2Ti4+xTa6−xO30−x/2 Nonstoichiometric Ceramics

Doping Behaviors of Nb2O5 and Co2O3 in Temperature Stable BaTiO3-based Ceramics

Microstructure and Dielectric Properties Control of Ba4(Nd0.7Sm0.3)9.33Ti18O54 Microwave Ceramics

Enhanced energy storage density with excellent temperature-stable dielectric properties of (1-x)[(Bi0.5Na0.5)0.94Ba0.06TiO3]-xAgNbO3 lead-free ceramics

Ta doping effect on microstructure and microwave dielectric properties of CoNb2O6‐based ceramics and mechanism study

Tunable Dielectric Properties of BaTiO<sub>3</sub>/La<sub>2</sub>O<sub>3</sub> Composite Ceramics

Simultaneously Achieved Ultrastable Dielectric and Energy Storage Properties in Lead-Free Bi0.5Na0.5TiO3-Based Ceramics