Abstract:In this research, a high-efficiency design method of the capacitive MEMS accelerometer is proposed. As the MEMS accelerometer has high precision and a compact structure, much research has been carried out, which mainly focused on the structural design and materials selection. To overcome the inconvenience and inaccuracy of the traditional design method, an orthogonal design and the particle swarm optimization (PSO) algorithm are introduced to improve the design efficiency. The whole process includes a finite element method (FEM) simulation, high-efficiency design, and verification. Through the theoretical analysis, the working mechanism of capacitive MEMS accelerometer is clear. Based on the comparison among the sweep calculation results of these parameters in the FEM software, four representative structural parameters are selected for further study, and they are le, nf, lf and wPM, respectively. le and lf are the length of the sensing electrode and fixed electrode on the right. nf is the number of electrode pairs, and wPM is the width of the mass block. Then, in order to reduce computation, an orthogonal design is adopted and finally, 81 experimental groups are produced. Sensitivity SV and mass Ma are defined as evaluation parameters, and structural parameters of experimental groups are imported into the FEM software to obtain the corresponding calculation results. These simulation data are imported into neural networks with the PSO algorithm. For a comprehensively accurate examination, three cases are used to verify our design method, and every case endows the performance parameters with different weights and expected values. The corresponding structural parameters of each case are given out after 24 iterations. Finally, the maximum calculation errors of SV and Ma are 1.2941% and 0.1335%, respectively, proving the feasibility of the high-efficiency design method.

DESIGN OF ELECTROSTATIC SUSPENSION ACCELEROMETER BASED ON EIGHT PAIRS OF DIFFERENTIAL CAPACITANCE ELECTRODES

Analysis of the Frequency-Dependent Vibration Rectification Error in Area-Variation-Based Capacitive MEMS Accelerometers.

Design of Force-Balance Capacitive Accelerometer

Design Of The Closed-Loop Capacitive Micro-Accelerometer Based On Pspice

Analysis of mechanical errors of planar capacitive sensor for two dimensional displacement measurement

Measuring Principle and Dynamic Characteristics Design for An Electro-Statically Suspended Accelerometer with Differential-Capacitance

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Analysis and Design of an Electrostatic Space Accelerometer

Design and Fabrication of a Differential Electrostatic Accelerometer for Space-Station Testing of the Equivalence Principle

The High-Efficiency Design Method for Capacitive MEMS Accelerometer

A Ground-Based Electrostatically Suspended Accelerometer

Poly-Si Based Two-Axis Differential Capacitive-Sensing Accelerometer

Study on suspension technique of space electrostatic accelerometer

A differential capacitance to voltage converter for electrostatic levitation applications

A Flexible Capacitive Tactile Sensor Array with High Scanning Speed for Distributed Contact Force Measurements

An Analytical Model for Studying the Structural Effects and Optimization of A Capacitive Tactile Sensor Array

Design of a Novel Low Cross-Axis Sensitivity Micro-Gravity Sandwich Capacitance Accelerometer.

Design, Fabrication and Test of a Low Range Capacitive Accelerometer With Anti-Overload Characteristics

A poly-Si based 2-axis differential capacitive-sensing accelerometer

Design and Fabrication Research on a Capacitive Accelerometer

A New Structure of Test Mass for Ground-used Electrostatically Suspended Accelerometer