Getting Video Data with USB Camera on Linux and Set-top Box

巫莉,于鸿洋,张萍

DOI: https://doi.org/10.3969/j.issn.1002-8692.2010.z1.032

2010-01-01

Abstract:After introducing the hardware and software of STi7109 STB,the whole process of installing and configuring USB video camera driver is explained,by using GTK+ lib to write the application,and setting up USB video camera′s data acquisition platform.

What problem does this paper attempt to address?

Application of USB host in digital temperature-humidity recorder

LU Jian-gang

2006-01-01

Abstract:It was briefly introduced how to apply the USB host in the digital Temperature-Humidity Recorder,and proposed the realization plan of USB host based on the SL811HS.This Host recorder can read and write the USB floppy disk,thus may disposethe work parameter of recorder through the USB floppy disk,also may write the history data which records to the USB floppy disk,then analysis processing by PC.
Research on USB Data Transmission Technology Based on LabVIEW

程龙飞,何闻

DOI: https://doi.org/10.3969/j.issn.1001-3881.2009.07.036

2009-01-01

Abstract:The USB data transmission technology based on LabVIEW was studied.The USB interface circuit which core chip is PDIUSBD12 produced by PHILIPS,the firmware programming method of the USB interface circuit,and the specific method of compiling application which is based on the LabVIEW were introduced.The result in the data transmission test shows that it can realize the data transmission between superior monitor and inferior computer by using LabVIEW and USB interface.
Video Driver Development Based on V4L2

徐家,陈奇

2010-01-01

Abstract:In embedded system,especially with low system resources,good driver structural design can effectively reduce memory and CPU occupation,hence improve the system’s performance.V4L2 is a new framework for video device driver development under Linux,and a in-depth study on the running mechanism of V4L2 is given.By making full use of its properties,a V4L2 driver develop method is presented for video device based on reducing system resource consumption and promoting driver’s behavior,and its validity is proven by experiment.
Design of Data Communication Interface of Data Acquirement System Based on USB

陈章位,赵玉刚

DOI: https://doi.org/10.3321/j.issn:1004-132X.2004.20.014

2004-01-01

Abstract:An interface based on USB is designed for Data Acquirement System with DSP chips. Cypress EZ-USB technology and FPGA technology were used in this interface. This kind of interface can achieve high speed data communication between the Data Acquirement System and the PC in the USB 1.1 protocol, and it can meet the requirements of high speed and real-time requirements.
Using USB Camera on Embedded Linux Platform

WANG Tao,JI Xiaoyong

DOI: https://doi.org/10.3969/j.issn.2095-347x.2006.01.016

2006-01-01

Abstract:Analyze and improve the V4L Standard and write drivers and applications for a USB Camera according to this. Further more, write an application based on FrameBuffer to show the video streams on LCD in time.
Design of Linux video capture driver based on s3c2440

Cao Zhanzhong,Zhou Yu,Wang Ziqiang,Du Sidan

DOI: https://doi.org/10.3969/j.issn.1002-7300.2009.02.032

2009-01-01

Abstract:Linux is now widely used in embedded systems.The procedure of developing linux video capture is introduced,based on the standard of V4L2——Video for Linux 2.The platform chosen is s3c2440 developing board,with the camera chip ov9652.As s3c2440 doesn't support sccb interface,the implementation of simulating SCCB protocol with GPIO is also described.It worked well at last,for video previewing and codecing.
Real-time Bidirectional Data Transmission Based on USB Interface

Kuang Wang

2005-01-01

Abstract:The article designs a real-time bidirectional transmission channel.And it introduces the theory of the design,selects specific chip,introduces the hardware of the channel,and brings forward the method of designing USB firmware,driver,and application.
Study of Teledata Acquisition System Based on LabView

张正华,李锡华

DOI: https://doi.org/10.3969/j.issn.1004-373X.2003.24.034

2003-01-01

Abstract:The data acquisition is a hotspot in industry control research what based on LabView.In this character,it is introduced the LabView which is the graphics languageprogramming the PCL711B, and achieve the temperature collection, and Secondary channel RS232′s interface by way of the light end machine is realized telecommunication of data.
Remote Video Monitoring System Based on Embedded Linux

ZHAO Fang-peng,YANG Jian-hua,ZHAO Zhong,LIU Wen-tao

DOI: https://doi.org/10.3969/j.issn.1000-8829.2007.05.019

2007-01-01

Abstract:A kind of remote video monitoring system,based on the embedded Linux and S3C2410,has been successfully developed. The system builds a Web server which can capture video signal from USB digital camera and transport the signal to client through Internet.The implementation of USB devices drivers and the realization of video signal capture under embedded Linux are dis- cussed.
Study on Video Capture of Machine Vision System

XIA Min-lei,GUO Bin,GAO Feng

2005-01-01

Abstract:With the development of video capture technology in machine vision systems,the Specification of Twain has become a standard software protocol and application programming interface(API) for communication between software applications and image acquisition devices.Nowadays almost all Digital Cameras and Scanners conform to Twain protocol.Based on explaining the specification,this paper explained how to design the program to acquire the image in the real machine vision system.
Application of Video Capture in UAV Image Processing Based on MPEG2

LI Yang,LI Ping,HAN Bo

DOI: https://doi.org/10.3969/j.issn.1001-4551.2007.10.034

2007-01-01

Abstract:Video capture module plays an important role in the unmanned air vehicle(UAV) image processing system.High quality video capture is the foundation of the effective image processing.A module realization method which combined the MPEG2 video capture hardware with the DirectShow technique was introduced.The design procedure was described in detail.Finally the performance of the application which suggested that the video quality was greatly improved.The experimental results show that the approach is robust,can solve normal MPEG2 stream capture problems.
Research and Implementing of USB Transmission of Digital Video Stream

Tian Minxiong,Shen Qinghong,Xiao Bo,Du Sidan

DOI: https://doi.org/10.16526/j.cnki.11-4762/tp.2008.05.050

2008-01-01

Abstract:In video digital decoding system the digital video stream should be delivered to PC for software-decoding.This disquisition of- fers a transmission scheme of the digital video stream which is from the video sampling system based on FPGA.The article implements the USB transmission of the digital video with the IP cores supplied by Xilinx FPGA,embedded PowerPC 405 hardcore and the USB 2.0 control- ler CY7C67300.The paper introduces the USB firmware development and customizes the USB interface's function according to the given ap- plication.Also the article establishes a data way between PowerPC 405 and CY7C67300 which will transmit the digital video stream to the USB controller,then to PC,finally realizes the USB transmission of Digital Video Stream.
Design and implement of the video capture card device driver under Linux

Wang Jianfei,Meng Yanjie,Zhao Yong

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.02.037

2007-01-01

Abstract:This paper introduce the structure of the video capture device driver under Linux, describe the detail implementation of the Philip 7146 based video capture card device driver using v4l2 API.
The design and implementation of RTOS on CM-STB

Wen-zhi CHEN,Lie SHI

DOI: https://doi.org/10.3969/j.issn.1000-7024.2000.04.007

2000-01-01

Abstract:STB(Set Top Box)now becomes one of the most important user-interface devices.Its functions have updated from a simple multi-frequency tuner into an interactive information service platform.General network information service such as Internet WWW, Video on Demand, Email and Stock Exchanging Service are well provided to fulfill the need of real application. The design of STB involves hardware and software. This paper concerns the software, and discusses the RTOS (Real time Operation System),implemented by us, on CM-STB (Cable Medem Set-Top Box) in detail.
Software Design of High Definition Set Top Box Based on Embedded Linux

彭锐,于鸿洋,张萍

DOI: https://doi.org/10.3969/j.issn.1002-8692.2010.09.015

2010-01-01

Abstract:In this paper,High Definition Set Top Box(HD STB) is designed based on the SoC chip STi7109 of ST company.Some key technologys are introduced,and the function,structure and softwore system of this HD STB are analyzed.Then,the software architecture of the HD-STB based on embedded Linux is emphatically described.
Design and Implementation of Network Set Top Box Based on Embedded Linux

刘海波,于鸿洋,张萍

DOI: https://doi.org/10.3969/j.issn.1002-8692.2010.z1.031

2010-01-01

Abstract:The significance and perspective of research on the new generation of Set Top Box(STB) based on STi7109 platform is introduced.And the system framework and feasibility and methods of implementation of network functionality in embedded Linux architecture are also desceibed.Then,the application of VoD and Web browser based on STB networking functionality is emphatically introduced.
The Implementation of Hard Disk Recording and Playing on HDTV Set-top BOX

刘正晔,薛永林,李凤亭

DOI: https://doi.org/10.3969/j.issn.1007-7022.2003.11.005

2003-01-01

Abstract:Introduces the structure of HDTV set-top box developed by our lab. Then describes the implement method of the recoding and playing functions on the set-top box. It has been proved that the implement can satisfy the demand of recording and playing HDTV program.
Design and Realization of a Kind of USB Interface Movable Digital Video Signal Board

Li Hongbin

DOI: https://doi.org/10.3969/j.issn.1004-373x.2005.07.046

2005-01-01

Abstract:The USB Bus has the characteristics of highspeed,hot plug in and pull out, it has been widely used on the domain of computer. This paper introduces the software and hardware design of a kind of USB interface dynamic video signal board. On the design of hardware it adopts the technology of MPU, CPLD ,and achieves the creation of video locomotive image which is controlled by epigynous computer via USB. MPU reads the position information of foreground locomotive image from epigynous computer, and refurbishes the image information of NVRAM on video signal board. CPLD scans NVRAM itinerantly and creats video signal via D/A conversion. The software interface design of epigynous computer is programmed by language of VB.
Design of Usb3.0 Video Transmission System with Uvc Protocol Supported

JiangBo Li,ChunTing Ma,Fan Yang

DOI: https://doi.org/10.2991/icmmct-16.2016.143

2016-01-01

Abstract:A USB3.0 video transmission system with UVC protocol supported is designed. CMOS image sensor is used as photoelectric device. As a USB3.0 controller chip, CYUSB3014 acquires and processes data from CMOS image sensor, then converts the data to video that conforms to the UVC protocol. At last the video data display on computer real-time. The system implements video transmission with UVC protocol supported in high speed and resolution in industrial video. The design with clear structure could be not only used as a handheld device, but also a debug equipment of several types of image sensor.
Data Acquisition System for Tank Floor Inspection Tool Based on USB

童允,黄松岭,赵伟

DOI: https://doi.org/10.3969/j.issn.1001-1390.2010.04.014

2010-01-01

Abstract:Current tank floor inspection tools have problems such as inconvenient connect interface with computer,data transmission cable vulnerable to interference,and unstable inspection signal.To solve these problems,a data acquisition system for tank floor inspection tool based on USB was developed.It is designed to adapt the requirements of 36-channel high resolution signal acquisition and processing.ADuC812 with an integrated A / D converter was used together with CY68013 USB microcontroller to accomplish multi-channel inspection signal acquisition,data buffering and USB interface communication with computer.This paper focused on the system hardware structure,the design of acquisition program and USB firmware program.The design has passed filed test of the tank floor inspection tool successfully.Experiments demonstrated that the system meets the requirements of real-time acquisition,transmission and display.This system could accomplish high-speed tank floor inspection assignments.

Getting Video Data with USB Camera on Linux and Set-top Box

Application of USB host in digital temperature-humidity recorder

Research on USB Data Transmission Technology Based on LabVIEW

Video Driver Development Based on V4L2

Design of Data Communication Interface of Data Acquirement System Based on USB

Using USB Camera on Embedded Linux Platform

Design of Linux video capture driver based on s3c2440

Real-time Bidirectional Data Transmission Based on USB Interface

Study of Teledata Acquisition System Based on LabView

Remote Video Monitoring System Based on Embedded Linux

Study on Video Capture of Machine Vision System

Application of Video Capture in UAV Image Processing Based on MPEG2

Research and Implementing of USB Transmission of Digital Video Stream

Design and implement of the video capture card device driver under Linux

The design and implementation of RTOS on CM-STB

Software Design of High Definition Set Top Box Based on Embedded Linux

Design and Implementation of Network Set Top Box Based on Embedded Linux

The Implementation of Hard Disk Recording and Playing on HDTV Set-top BOX

Design and Realization of a Kind of USB Interface Movable Digital Video Signal Board

Design of Usb3.0 Video Transmission System with Uvc Protocol Supported

Data Acquisition System for Tank Floor Inspection Tool Based on USB