Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Study of preparation and properties on epoxy resin adhesive modified by PU

Modification of Epoxy Resin by Polyurethane Based on Polyether

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Studies on Adhesion Performance of Epoxy Resin/Polymercaptan Toughened with Propoxylated Glycerin Triglycidyl Ether

Structure and properties of novel silicone polyamine as epoxy resin curing agents

Study on epoxy resins modified by polycarbonate polyurethanes

Studies on the influence of soft-segment structure on the properties of polyurethane adhesive

Study on contamination–free and transparent two–component PU adhesive

Synthesis and Application of Hydroxyethyl Methacrylate Modified Waterborne Polyurethane

Eco-Friendly Epoxy-Terminated Polyurethane-Modified Epoxy Resin with Efficient Enhancement in Toughness

Preparation and Properties of Toluene-Diisocyanate-Trimer-Modified Epoxy Resin

Study on the Synthesis and Properties of Waterborne Polyurea Modified by Epoxy Resin

Preparation and Properties of Advanced Materials for Bi-component Polyurethane Adhesives Containing Siloxane.

Preparation and Characterization of Graft Copolymer EVA-g-PU

Role of the Soft and Hard Segments Structure in Modifying the Performance of Acrylic Adhesives Modified by Polyurethane Macromonomers

Study on epoxy resin adhesive toughened & cured by amino-terminated polyurea

Study on Properties and Preparation of Thermoplastic Polyurethane Hot-Melt Adhesive

THE EPOXY STRUCTURE ADHESIVE MODIFIED BY NEW POLYETHERIMIDE

Preparation of Inorganic Filler Modified Epoxy Resin Adhesive and Study on Its Compatibility with UDMH

Study on Properties of Waterborne Polyurethane Acrylate Modified Epoxy Acrylate Resin

Study on Properties of Epoxy Composites Modified by Functional Graphite Oxide and Polyurethane