Ricci Curvature on Alexandrov Spaces and Rigidity Theorems

Hui-Chun Zhang,Xi-Ping Zhu

DOI: https://doi.org/10.4310/cag.2010.v18.n3.a4

2010-01-01

Communications in Analysis and Geometry

Abstract:In this paper, we introduce a new notion for lower bounds of Ricci curvatureon Alexandrov spaces, and extend Cheeger-Gromoll splitting theorem and Cheng'smaximal diameter theorem to Alexandrov spaces under this Ricci curvaturecondition.

What problem does this paper attempt to address?

On a New Definition of Ricci Curvature on Alexandrov Spaces

Zhang Huichun,Zhu Xiping

DOI: https://doi.org/10.1016/s0252-9602(10)60185-3

2010-01-01

Abstract:Recently, in [49], a new definition for lower Ricci curvature bounds on Alexandrov spaces was introduced by the authors. In this article, we extend our research to summarize the geometric and analytic results under this Ricci condition. In particular, two new results, the rigidity result of Bishop-Gromov volume comparison and Lipschitz continuity of heat kernel, are obtained.
The Structure of Spaces with Bakry–Émery Ricci Curvature Bounded Below

Feng Wang,Xiaohua Zhu

DOI: https://doi.org/10.1515/crelle-2017-0042

2017-01-01

Journal für die reine und angewandte Mathematik (Crelles Journal)

Abstract:In this paper, we explore the limit structure of a sequence of Riemannian manifolds with Bakry-Émery Ricci curvature bounded below in the Gromov-Hausdorff topology. By extending the techniques established by Cheeger-Cloding for Riemannian manifolds with Ricci curvature bounded below, we prove that each tangent space at a point of the limit space is a metric cone. We also analyze the singular structure of the limit space analogous to a work of Cheeger-Colding-Tian. Our results will be applied to study the limit space of a sequence of Kähler metrics arising from solutions of certain complex Monge-Ampère equations for the existence of Kähler-Ricci solitons on a Fano manifold via the continuity method.
Reverse Comparison Theorems with Upper Integral Ricci Curvature Condition

Chen, Hang,Gao, Chaoqun

DOI: https://doi.org/10.1007/s10455-021-09817-x

2022-01-01

Annals of Global Analysis and Geometry

Abstract:We prove some reverse Laplacian comparison and relative volume comparison results under the situation where one has an integral bound for the part of the Ricci curvature which lies above a prescribed continuous function of the distance parameter. These extend parts of results of Ding (Chin Ann Math Ser B 15(1):35–42, 1994) and Kura (Proc Jpn Acad Ser A Math Sci 78(1):7–9, 2002) from pointwise Ricci curvature to integral Ricci curvature.
Chiti-type Reverse Hölder Inequality and Torsional Rigidity under Integral Ricci Curvature Condition

Chen, Hang

DOI: https://doi.org/10.1007/s11118-020-09887-9

2021-01-01

Potential Analysis

Abstract:In this paper, we prove a reverse Hölder inequality for the eigenfunction of the Dirichlet problem on domains of a compact Riemannian manifold with the integral Ricci curvature condition. We also prove an isoperimetric inequality for the torsional rigidity of such domains. These results extend some recent work of Gamara et al. (Open Math. 13(1), 557–570, 2015) and Colladay et al. (J. Geom. Anal. 28(4), 3906–3927, 2018) from the pointwise lower Ricci curvature bound to the integral Ricci curvature condition. We also extend the results from Laplacian to p-Laplacian.
Ricci curvature bounds and rigidity for non-smooth Riemannian and semi-Riemannian metrics

Michael Kunzinger,Argam Ohanyan,Alessio Vardabasso

2024-10-21

Abstract:We study rigidity problems for Riemannian and semi-Riemannian manifolds with metrics of low regularity. Specifically, we prove a version of the Cheeger-Gromoll splitting theorem \cite{CheegerGromoll72splitting} for Riemannian metrics and the flatness criterion for semi-Riemannian metrics of regularity $C^1$. With our proof of the splitting theorem, we are able to obtain an isometry of higher regularity than the Lipschitz regularity guaranteed by the $\mathsf{RCD}$-splitting theorem \cite{gigli2013splitting, gigli2014splitoverview}. Along the way, we establish a Bochner-Weitzenböck identity which permits both the non-smoothness of the metric and of the vector fields, complementing a recent similar result in \cite{mondino2024equivalence}. The last section of the article is dedicated to the discussion of various notions of Sobolev spaces in low regularity, as well as an alternative proof of the equivalence (see \cite{mondino2024equivalence}) between distributional Ricci curvature bounds and $\mathsf{RCD}$-type bounds, using in part the stability of the variable $\mathsf{CD}$-condition under suitable limits \cite{ketterer2017variableCD}.

Differential Geometry,Metric Geometry
Optimal diameter estimates of three-dimensional Ricci limit spaces

Bo Zhu,Xingyu Zhu

DOI: https://doi.org/10.48550/arXiv.2302.09415

2023-02-18

Differential Geometry

Abstract:In this note, we prove that positive scalar curvature can pass to three dimensional Ricci limit spaces of non-negative Ricci curvature when it splits off a line. As a corollary, we obtain an optimal Bonnet-Myers type upper bound. Moreover, we obtain a similar statement in all dimensions for Alexandrov spaces of non-negative curvature.
Quantitative Maximal Diameter Rigidity of Positive Ricci Curvature

Tianyin Ren,Xiaochun Rong

DOI: https://doi.org/10.1515/crelle-2024-0015

2024-07-18

Abstract:In Riemannian geometry, the Cheng's maximal diameter rigidity theorem says that if a complete $n$-manifold $M$ of Ricci curvature, $\operatorname{Ric}_M\ge (n-1)$, has the maximal diameter $\pi$, then $M$ is isometric to the unit sphere $S^n_1$. The main result in this paper is a quantitative maximal diameter rigidity: if $M$ satisfies that $\operatorname{Ric}_M\ge n-1$, $\operatorname{diam}(M)\approx \pi$, and the Riemannian universal cover of every metric ball in $M$ of a definite radius satisfies a Riefenberg condition, then $M$ is diffeomorphic and bi-Hölder close to $S^n_1$.

Differential Geometry
Rigidity of Minimal Submanifolds in Space Forms

Hang Chen,Guofang Wei

DOI: https://doi.org/10.1007/s12220-020-00462-7

2020-01-01

Abstract:In this paper, we consider the rigidity for an n(≥ 4) -dimensional submanifold M^n with parallel mean curvature in the space form 𝕄^n+p_c when the integral Ricci curvature of M has some bound. We prove that, if c+H^2>0 and ‖Ric_-^λ‖ _n/2< ϵ (n,c, λ , H) for λ satisfying n-2n-1 (c+H^2) < λ≤ c+H^2 , then M is the totally umbilical sphere 𝕊^n( 1√(c+H^2)) . Here H is the norm of the parallel mean curvature of M , and ϵ (n,c,λ , H) is a positive constant depending only on n, c,λ and H . This extends part of the earlier work of Xu and Gu (Geom Funct Anal 23(5):1684–1703, 2013) from pointwise Ricci curvature lower bound to integral Ricci curvature lower bound.
Ricci curvature, minimal surfaces and sphere theorems

Ying Shen,Shunhui Zhu

DOI: https://doi.org/10.48550/arXiv.dg-ga/9709002

1997-08-30

Abstract:Using an analogue of Myers' theorem for minimal surfaces and three dimensional topology, we prove the diameter sphere theorem for Ricci curvature in dimension three and a corresponding eigenvalue pinching theorem. This settles these two open problems for closed 3 manifolds with positive Ricci curvature since they are both false in dimensions greater than three.

Differential Geometry
Lipschitz-Volume rigidity on limit spaces with Ricci curvature bounded from below

Nan Li,Feng Wang

DOI: https://doi.org/10.48550/arXiv.1310.8373

2015-06-23

Abstract:We prove a Lipschitz-Volume rigidity theorem for the non-collapsed Gromov-Hausdorff limits of manifolds with Ricci curvature bounded from below. This is a counterpart of the Lipschitz-Volume rigidity in Alexandrov geometry.

Differential Geometry
Rigidity Results for Compact Submanifolds with Pinched Ricci Curvature in Euclidean and Spherical Space Forms

Jianquan Ge,Ya Tao,Yi Zhou

2024-11-21

Abstract:For compact submanifolds in Euclidean and Spherical space forms with Ricci curvature bounded below by a function $\alpha(n,k,H,c)$ of mean curvature, we prove that the submanifold is either isometric to the Einstein Clifford torus, or a topological sphere for the maximal bound $\alpha(n,[\frac{n}{2}],H,c)$, or has up to $k$-th homology groups vanishing. This gives an almost complete (except for the differentiable sphere theorem) characterization of compact submanifolds with pinched Ricci curvature, generalizing celebrated rigidity results obtained by Ejiri, Xu-Tian, Xu-Gu, Xu-Leng-Gu, Vlachos, Dajczer-Vlachos.

Differential Geometry
On the rigidity of Ricci shrinkers

Yu Li,Wenjia Zhang

2023-05-10

Abstract:In this paper, we establish the rigidity of the generalized cylinder $N^n \times \mathbb R^{m-n}$, or a quotient thereof, in the space of Ricci shrinkers equipped with the pointed-Gromov-Hausdorff topology. Here, $N$ is a stable Einstein manifold that has an obstruction of order $3$. The proof is based on a quantitative characterization of the rigidity of compact Ricci shrinkers, a rigidity inequality of mixed orders on generalized cylinders, and the method of contraction and extension. As an application, we prove the uniqueness of the tangent flow for general compact Ricci flows under the assumption that one tangent flow is a generalized cylinder.

Differential Geometry
Rigidity and ε-regularity theorems of Ricci shrinkers

Jie Wang,Youde Wang

2023-08-12

Abstract:In this paper, we study the rigidity and {\epsilon}-regularity theorems of Ricci shrinkers. First we prove the rigidity of the asymptotic volume ratio and local volume around a base point of a non-compact Ricci shrinker. Next we obtain some {\epsilon}-regularity theorems of local entropy and curvature, which improve the previous corresponding results essentially and use them to study the structure of Ricci shrinkers at infinity. Especially, if the curvature of a non-compact Ricci shrinker satisfies some natural integral conditions, then it is asymptotic to a cone.

Differential Geometry
On some rigidity theorems of Q-curvature

Yiyan Xu,Shihong Zhang

2023-08-05

Abstract:In this paper, we investigate the rigidity of Q-curvature. Specifically, we consider a closed, oriented $n$-dimensional ($n\geq6$) Riemannian manifold $(M,g)$ and prove the following results under the condition $\int_{M} \nabla R\cdot\nabla \mathrm{Q}\mathrm{d} V_g\leq0$. (1) If $(M,g)$ is locally conformally flat with nonnegative Ricci curvature, then $(M,g)$ is isometric to a quotient of $\mathbb{R}^n$, $\mathbb{S}^n$, or $\mathbb{R}\times\mathbb{S}^{n-1}$. (2) If $(M,g)$ has $\delta^2 W=0$ with nonnegative sectional curvature, then $(M,g)$ is isometric to a quotient of the product of Einstein manifolds. Additionally, we investigate some rigidity theorems involving Q-curvature about hypersurfaces in simply-connected space forms. We also show the uniqueness of metrics with constant scalar curvature and constant Q-curvature in a fixed conformal class.

Differential Geometry
Ricci curvature, diameter and eigenvalues of amply regular graphs

Kaizhe Chen,Chunyang Hu,Shiping Liu,Heng Zhang

2024-10-28

Abstract:We prove a weaker version of a conjecture proposed by Qiao, Park and Koolen on diameter bounds of amply regular graphs and make new progress on Terwilliger's conjecture on finiteness of amply regular graphs. We achieve these results by a significantly improved Lin--Lu--Yau curvature estimate and new Bakry--Émery curvature estimates. We further discuss applications of our curvature estimates to bounding eigenvalues, isoperimetric constants, and volume growth. In particular, we obtain a volume estimate of amply regular graphs which is sharp for hypercubes.

Differential Geometry,Combinatorics,Spectral Theory
Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

Fengbo Hang,Xiaodong Wang

DOI: https://doi.org/10.48550/arXiv.0911.0380

2009-11-02

Differential Geometry

Abstract:We prove some boundary rigidity results for the hemisphere under a lower bound for Ricci curvature. The main result can be viewed as the Ricci version of a conjecture of Min-Oo.
Nonnegative Ricci curvature, splitting at infinity, and first Betti number rigidity

Jiayin Pan,Zhu Ye

2024-04-16

Abstract:We study the rigidity problems for open (complete and noncompact) $n$-manifolds with nonnegative Ricci curvature. We prove that if an asymptotic cone of $M$ properly contains a Euclidean $\mathbb{R}^{k-1}$, then the first Betti number of $M$ is at most $n-k$; moreover, if equality holds, then $M$ is flat. Next, we study the geometry of the orbit $\Gamma\tilde{p}$, where $\Gamma=\pi_1(M,p)$ acts on the universal cover $(\widetilde{M},\tilde{p})$. Under a similar asymptotic condition, we prove a geometric rigidity in terms of the growth order of $\Gamma\tilde{p}$. We also give the first example of a manifold $M$ of $\mathrm{Ric}>0$ and $\pi_1(M)=\mathbb{Z}$ but with a varying orbit growth order.

Differential Geometry
Precompactness of domains with lower Ricci curvature bound under Gromov-Hausdorff topology

Shicheng Xu

2023-11-09

Abstract:Based on a quantitative version of the classical Hopf-Rinow theorem in terms of the doubling property, we prove a new precompactness principle in the (pointed) Gromov-Hausdorff topology for domains in (maybe incomplete) Riemannian manifolds with a lower Ricci curvature bound, which are applicable to those with a Reifenberg-flat boundary, or the covering spaces of balls naturally appear in the study of local geometry and topology of manifolds with lower curvature bounds.

Differential Geometry,Metric Geometry
On some new Ricci flow invariant curvature conditions

Yiyan Xu

2024-12-18

Abstract:We would like to study new Ricci flow invariant curvature conditions. Specifically, we provide quantitative evidence for an unpublished conjecture of Böhm and Wilking. As an application, we study the topology of manifolds with pinched curvature.

Differential Geometry
On the singularities of spaces with bounded Ricci curvature

J. Cheeger,T.H. Colding,G. Tian

DOI: https://doi.org/10.1007/PL00012649

2002-01-01

Abstract:. ((Without Abstract)).

Ricci Curvature on Alexandrov Spaces and Rigidity Theorems

On a New Definition of Ricci Curvature on Alexandrov Spaces

The Structure of Spaces with Bakry–Émery Ricci Curvature Bounded Below

Reverse Comparison Theorems with Upper Integral Ricci Curvature Condition

Chiti-type Reverse Hölder Inequality and Torsional Rigidity under Integral Ricci Curvature Condition

Ricci curvature bounds and rigidity for non-smooth Riemannian and semi-Riemannian metrics

Optimal diameter estimates of three-dimensional Ricci limit spaces

Quantitative Maximal Diameter Rigidity of Positive Ricci Curvature

Rigidity of Minimal Submanifolds in Space Forms

Ricci curvature, minimal surfaces and sphere theorems

Lipschitz-Volume rigidity on limit spaces with Ricci curvature bounded from below

Rigidity Results for Compact Submanifolds with Pinched Ricci Curvature in Euclidean and Spherical Space Forms

On the rigidity of Ricci shrinkers

Rigidity and ε-regularity theorems of Ricci shrinkers

On some rigidity theorems of Q-curvature

Ricci curvature, diameter and eigenvalues of amply regular graphs

Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

Nonnegative Ricci curvature, splitting at infinity, and first Betti number rigidity

Precompactness of domains with lower Ricci curvature bound under Gromov-Hausdorff topology

On some new Ricci flow invariant curvature conditions

On the singularities of spaces with bounded Ricci curvature