On some new Ricci flow invariant curvature conditions

Yiyan Xu

2024-12-18

Abstract:We would like to study new Ricci flow invariant curvature conditions. Specifically, we provide quantitative evidence for an unpublished conjecture of Böhm and Wilking. As an application, we study the topology of manifolds with pinched curvature.

Differential Geometry

What problem does this paper attempt to address?

Ricci Flow on Compact Kähler Manifolds of Positive Bisectional Curvature

Hd Cao,Bl Chen,Xp Zhu

DOI: https://doi.org/10.1016/j.crma.2003.09.030

2003-01-01

Comptes Rendus Mathématique

Abstract:We announce a new proof of the uniform estimate on the curvature of solutions to the Ricci flow on a compact Kähler manifold $M^n$ with positive bisectional curvature. In contrast to the recent work of X. Chen and G. Tian, our proof of the uniform estimate does not rely on the exsitence of Kähler-Einstein metrics on $M^n$, but instead on the first author's Harnack inequality for the Kähler-Ricc flow, and a very recent local injectivity radius estimate of Perelman for the Ricci flow.
Local Pinching Estimates in 3-Dim Ricci Flow

Bing-Long Chen,Guoyi Xu,Zhuhong Zhang

DOI: https://doi.org/10.4310/mrl.2013.v20.n5.a3

2013-01-01

Mathematical Research Letters

Abstract:We study curvature pinching estimates of Ricci flow on complete 3- dimensional manifolds without bounded curvature assumption. We will derive some general curvature conditions which are preserved on any complete solution of 3-dim Ricci flow, these conditions include nonnegative Ricci curvature and sectional curvature as special cases. A local version of Hamilton-Ivey estimates is also obtained.
On the conditions to extend Ricci flow(II)

Bing Wang

DOI: https://doi.org/10.48550/arXiv.1107.5107

2011-07-26

Differential Geometry

Abstract:We develop some estimates under the Ricci flow and use these estimates to study the blowup rates of curvatures at singularities. As applications, we obtain some gap theorems: $\displaystyle \sup_X |Ric|$ and $\displaystyle \sqrt{\sup_X |Rm|} \cdot \sqrt{\sup_X |R|}$ must blowup at least at the rate of type-I. Our estimates also imply some gap theorems for shrinking Ricci solitons.
On a New Definition of Ricci Curvature on Alexandrov Spaces

Zhang Huichun,Zhu Xiping

DOI: https://doi.org/10.1016/s0252-9602(10)60185-3

2010-01-01

Abstract:Recently, in [49], a new definition for lower Ricci curvature bounds on Alexandrov spaces was introduced by the authors. In this article, we extend our research to summarize the geometric and analytic results under this Ricci condition. In particular, two new results, the rigidity result of Bishop-Gromov volume comparison and Lipschitz continuity of heat kernel, are obtained.
Gap Theorem on Riemannian manifolds using Ricci flow

Pak-Yeung Chan,Man-Chun Lee

2023-08-13

Abstract:In this work, we use the Ricci flow approach to study the gap phenomenon of Riemannian manifolds with non-negative curvature and sub-critical scaling invariant curvature decay. The first main result is a quantitative Ricci flow existence theory without non-collapsing assumption. We use it to show that complete non-compact manifolds with non-negative complex sectional curvature and sufficiently small average curvature decay are necessarily flat. The second main result concerns three-manifolds with non-negative Ricci curvature of quadratic decay. By combining our newly established curvature estimate and method in Kähler geometry, we show that if the curvature decays slightly faster even in average sense, the manifold must be flat. This strengthens a result of Reiris. In the compact case, we use the Ricci flow regularization to generalize the celebrated Gromov-Ruh Theorem in this direction.

Differential Geometry
On some rigidity theorems of Q-curvature

Yiyan Xu,Shihong Zhang

2023-08-05

Abstract:In this paper, we investigate the rigidity of Q-curvature. Specifically, we consider a closed, oriented $n$-dimensional ($n\geq6$) Riemannian manifold $(M,g)$ and prove the following results under the condition $\int_{M} \nabla R\cdot\nabla \mathrm{Q}\mathrm{d} V_g\leq0$. (1) If $(M,g)$ is locally conformally flat with nonnegative Ricci curvature, then $(M,g)$ is isometric to a quotient of $\mathbb{R}^n$, $\mathbb{S}^n$, or $\mathbb{R}\times\mathbb{S}^{n-1}$. (2) If $(M,g)$ has $\delta^2 W=0$ with nonnegative sectional curvature, then $(M,g)$ is isometric to a quotient of the product of Einstein manifolds. Additionally, we investigate some rigidity theorems involving Q-curvature about hypersurfaces in simply-connected space forms. We also show the uniqueness of metrics with constant scalar curvature and constant Q-curvature in a fixed conformal class.

Differential Geometry
On the Conditions to Extend Ricci Flow

Bing Wang

DOI: https://doi.org/10.48550/arXiv.0704.3018

2007-04-24

Abstract:Along a Ricci flow solution on a closed manifold, we show that if Ricci curvature is uniformly bounded from below, then a scalar curvature integral bound is enough to extend flow. Moreover, this integral bound condition is optimal in some sense.

Differential Geometry
Long-time Ricci flow existence and topological rigidity from manifolds with pinched scale-invariant integral curvature

Albert Chau,Adam Martens

2024-03-05

Abstract:We prove long-time existence of the Ricci flow starting from complete manifolds with bounded curvature and scale-invariant integral curvature sufficiently pinched with respect to the inverse of its Sobolev constant. Moreover, if the curvature is sub-critical $L^p$ integrable, this flow converges locally smoothly to a limiting metric $g(\infty)$ on $M$ with $(M,g(\infty))$ isometric to the standard flat $\mathbb{R}^n$, which implies topological rigidity of $M$. This generalizes work of Chen, who proved analogous results for asymptotically flat manifolds. We also prove a long-time Ricci flow existence (and likewise topological rigidity) result for unbounded curvature initial data, assuming the initial data is a locally smooth limit of bounded curvature manifolds as described above.

Differential Geometry
Space of Ricci flows (I)

Xiuxiong Chen,Bing Wang

DOI: https://doi.org/10.48550/arXiv.0902.1545

2009-02-11

Abstract:In this paper, we study the moduli spaces of noncollapsed Ricci flow solutions with bounded energy and scalar curvature. We show a weak compactness theorem for such moduli spaces and apply it to study isoperimetric constant control, Kähler Ricci flow and moduli space of gradient shrinking solitons.

Differential Geometry
Short-time Existence of the Ricci Flow on Noncompact Riemannian Manifolds

Guoyi Xu

DOI: https://doi.org/10.1090/s0002-9947-2013-05998-3

IF: 1.3529

2013-01-01

Transactions of the American Mathematical Society

Abstract:In this paper, we give the first detailed proof of the short-time existence of Deane Yang’s local Ricci flow. Then, using the local Ricci flow, we prove the short-time existence of the Ricci flow on noncompact manifolds, whose Ricci curvature has global lower bound and sectional curvature has only local average integral bound. The short-time existence of the Ricci flow on noncompact manifolds with bounded curvature was studied by Wan-Xiong Shi in the 1990s. As a corollary of our main theorem, we obtain the short-time existence part of Shi’s theorem in this more general context.
On orthogonal Ricci curvature

Lei Ni,Fangyang Zheng

DOI: https://doi.org/10.1090/conm/735/14827

2019-01-01

Contemporary Mathematics

Abstract:In this paper we discuss some recent progresses in the study of compact Kahler manifolds with positive orthogonal Ricci curvature, a curvature condition defined as the difference between Ricci curvature and holomorphic sectional curvature. In the recent works by authors and the joint work of authors with Q. Wang the comparison theorems, vanishing theorems, and structural theorems for such manifolds have been proved. We also constructed examples of this type of manifolds, and give some classification results in low dimensions.
Ricci Flow with Surgery on Four-manifolds with Positive Isotropic Curvature

Bing-Long Chen,Xi-Ping Zhu

DOI: https://doi.org/10.4310/jdg/1175266204

2006-01-01

Journal of Differential Geometry

Abstract:In this paper we study the Ricci flow on compact four-manifolds with positive isotropic curvature and with no essential incompressible space form. Our purpose is two-fold. One is to give a complete proof of Hamilton's classification theorem on four-manifolds with positive isotropic curvature and with no essential incompressible space form; the other is to extend some recent results of Perelman on the three-dimensional Ricci flow to four-manifolds. During the the proof we have actually provided, up to slight modifications, all necessary details for the part from Section 1 to Section 5 of Perelman's second paper on the Ricci flow.
A Discrete Ricci Flow on Surfaces with Hyperbolic Background Geometry

Huabin Ge,Xu

DOI: https://doi.org/10.1093/imrn/rnw142

2016-01-01

International Mathematics Research Notices

Abstract:In this article, we generalize our results in [6] to triangulated surfaces with hyperbolic background geometry, which means that all triangles can be embedded in the standard hyperbolic space. We introduce a new discrete Gauss curvature by dividing the classical discrete Gauss curvature by an area element, which could be taken as the area of the hyperbolic disk packed at each vertex. We prove that the corresponding discrete Ricci flow with a nonpositive prescribing curvature function converges if and only if the prescribing curvature function is admissible. In the special case that the prescribing curvature function is zero, this provides another characterization of Thurston's circle packing theorem. In the case of zero prescribing curvature function, we further prove that the flow converges to a zero curvature metric if the initial curvatures are all nonpositive. Note that, this result does not require the existence of zero curvature metric or Thurston's combinatorial-topological condition. We further generalize the definition of combinatorial curvature to any given area element and prove the equivalence between the admissibility of a nonpositive prescribing curvature function and the convergence of the corresponding flow.
Weak scalar curvature lower bounds along Ricci flow

Wenshuai Jiang,Weimin Sheng,Huaiyu Zhang

DOI: https://doi.org/10.1007/s11425-021-2037-7

2023-01-16

Science China Mathematics

Abstract:In this paper, we study Ricci flow on compact manifolds with a continuous initial metric. It was known from Simon (2002) that the Ricci flow exists for a short time. We prove that the scalar curvature lower bound is preserved along the Ricci flow if the initial metric has a scalar curvature lower bound in the distributional sense provided that the initial metric is W 1, p for some n < p ⩽ ∞. As an application, we use this result to study the relation between the Yamabe invariant and Ricci flat metrics. We prove that if the Yamabe invariant is nonpositive and the scalar curvature is nonnegative in the distributional sense, then the manifold is isometric to a Ricci flat manifold.

mathematics, applied
Ricci Flow Under Kato-Type Curvature Lower Bound

Man-Chun Lee

DOI: https://doi.org/10.1007/s12220-023-01522-4

2024-01-12

Journal of Geometric Analysis

Abstract:In this work, we extend the existence theory of non-collapsed Ricci flows from point-wise curvature lower bound to Kato-type curvature lower bound. As an application, we prove that any compact three-dimensional non-collapsed strong Kato limit space is homeomorphic to a smooth manifold. Moreover, similar result also holds in higher dimension under stronger curvature condition. We also use the Ricci flow smoothing to study stability problem in scalar curvature geometry.

mathematics
A Gap Theorem for Complete Noncompact Manifolds with Nonnegative Ricci Curvature

BL Chen,XP Zhu

DOI: https://doi.org/10.4310/cag.2002.v10.n1.a9

2002-01-01

Communications in Analysis and Geometry

Abstract:In this paper we obtain a gap theorem for the Ricci curvature over complete noncompact locally conformally flat manifolds. We prove that if the Ricci curvature is nonnegative and decays faster than quadratic at infinity, then the manifold is flat.
Ricci flow on Orbifold

Bing Wang

DOI: https://doi.org/10.48550/arXiv.1003.0151

2010-02-28

Differential Geometry

Abstract:In this paper, we study the behavior of Ricci flows on compact orbifolds with finite singularities. We show that Perelman's pseudolocality theorem also holds on orbifold Ricci flow. Using this property, we obtain a weak compactness theorem of Ricci flows on orbifolds under some natural technical conditions. This generalizes the corresponding theorem on manifolds. As an application, we can use K\"ahler Ricci flow to find new K\"ahler Einstein metrics on some orbifold Fano surfaces. For example, if $Y$ is a cubic surface with only one ordinary double point or $Y$ is an orbifold Fano surface with degree 1 and every singularity on it is a rational double point of type $\A_k (1 \leq k \leq 6)$, then we can find a KE metric of $Y$ by running K\"ahler Ricci flow.
On locally conformally flat manifolds with positive pinched Ricci curvature

Liang Cheng

2023-05-29

Abstract:By using the Yamabe flow, we prove that if $(M^n,g)$, $n\geq3$, is an $n$-dimensional locally conformally flat complete Riemannian manifold $Rc\geq \epsilon Rg>0$, where $\epsilon>0$ is a uniformly constant, then $M^n$ must be compact. Our result shows that Hamilton's pinching conjecture also holds for higher dimensional case if we assume additionally the metric is locally conformally flat.

Differential Geometry
Ricci flow on K\"ahler-Einstein manifolds

X. X. Chen,G. Tian

DOI: https://doi.org/10.1007/s002220100181

2003-01-01

Abstract: In our previous paper math.DG/0010008, we develop some new techniques in attacking the convergence problems for the K\"ahler Ricci flow. The one of main ideas is to find a set of new functionals on curvature tensors such that the Ricci flow is the gradient like flow of these functionals. We successfully find such functionals in case of Kaehler manifolds. On K\"ahler-Einstein manifold with positive scalar curvature, if the initial metric has positive bisectional curvature, we prove that these functionals have a uniform lower bound, via the effective use of Tian's inequality. Consequently, we prove the following theorem: Let $M$ be a K\"ahler-Einstein manifold with positive scalar curvature. If the initial metric has nonnegative bisectional curvature and positive at least at one point, then the K\"ahler Ricci flow will converge exponentially fast to a K\"ahler-Einstein metric with constant bisectional curvature. Such a result holds for K\"ahler-Einstein orbifolds.

On some new Ricci flow invariant curvature conditions

Ricci Flow on Compact Kähler Manifolds of Positive Bisectional Curvature

Local Pinching Estimates in 3-Dim Ricci Flow

On the conditions to extend Ricci flow(II)

On a New Definition of Ricci Curvature on Alexandrov Spaces

Gap Theorem on Riemannian manifolds using Ricci flow

On some rigidity theorems of Q-curvature

On the Conditions to Extend Ricci Flow

Long-time Ricci flow existence and topological rigidity from manifolds with pinched scale-invariant integral curvature

Space of Ricci flows (I)

Short-time Existence of the Ricci Flow on Noncompact Riemannian Manifolds

On orthogonal Ricci curvature

Ricci Flow with Surgery on Four-manifolds with Positive Isotropic Curvature

A Discrete Ricci Flow on Surfaces with Hyperbolic Background Geometry

Weak scalar curvature lower bounds along Ricci flow

Ricci Flow Under Kato-Type Curvature Lower Bound

A Gap Theorem for Complete Noncompact Manifolds with Nonnegative Ricci Curvature

Ricci flow on Orbifold

On locally conformally flat manifolds with positive pinched Ricci curvature

Ricci flow on K\"ahler-Einstein manifolds