Abstract:Tip clearance flow in axial flow compressor is unavoidable and responsible for pressure losses and noise generation and influences the stability of the compressor. However, necessary flow measurement in the blade tip region is a great challenge due to the small gap width as well as the structure limitation. In this paper, a polyvinylidene fluoride (PVDF) piezoelectric-film sensor array is developed to capture the dynamic pressure field over the blade tip in an axial flow compressor. The PVDF sensor array with 40 evenly distributed sensing points is fabricated directly on a 30 μm thick aluminum-metalized polarized PVDF film through photolithography. Dynamic calibration of the sensor is accomplished using acoustic source as excitation and a microphone as a reference. The test pressure range is up to 3.5 kPa and the sampling frequency is 20 kHz. The sensor presents a high signal-to-noise ratio and good consistency with the reference microphone. Sensitivity, frequency response, linearity, hysteresis, repeatability as well as the influence of temperature are also investigated through the calibration apparatus. The calibration gives credence to the relevance and reliability of this sensor for the application in dynamic pressure field measurement. The sensor is then applied to an actual measurement in a compressor. The output of the PVDF sensor array is also compared with the results of common pressure transducers, and the features of the dynamic pressure filed are discussed. The results indicate that the PVDF sensor array is capable of the dynamic pressure field measurement over the blade tip, and superior to the conventional approaches in installation, spatial resolution, frequency response, and cost. These advantages indicate its potential broad application in pressure measurement, especially for the complex spatial surface or thin-walled structure, such as the blade surface and the thin casing wall of the compressor.

Measurement of Axial Dynamic Clearance in Scroll Compressor

Experimental Study on the Feasibility of Axial Clearance Measurement in Scroll Compressor Using Eddy Current Method

Experimental study on the performance of scroll air compressor under water injection

EXPERIMENTAL INVESTIGATION OF THE UNSTEADY TIP CLEARANCE FLOW IN A LOW SPEED AXIAL CONTRA-ROTATING COMPRESSOR

Analysis of 3D Transient Flow in a High-Speed Scroll Refrigeration Compressor

Numerical analysis of the transient leakage flow in axial clearance of a scroll refrigeration compressor

Unsteady characteristic and flow mechanism of a scroll compressor in small-scale compressed air energy storage system

Rotor-Stator Axial Clearance Measurement Technique of Engine Based on Frequency-Swept Interferometry

Study on Contact Rubbing between Orbiting and Fixed Scroll Plate of Water-injection Scroll Air Compressor

High-precision dynamic axial clearance measurement method based on an all-fiber heterodyne microwave-AMCW with an all-phase tracking algorithm

Experimental investigation on the characteristics of variable displacement swash plate compressor

Clearance Measurement Equipment for Gas Lubricated Dynamic Pressure Bearing of Gyro Motor

Study on the Contact and Size of Radial and Flank Leakage Gaps of Scrolls in a Scroll Compressor with CFD/CSM Simulations

Experimental and numerical study on the dynamic and lubrication characteristics of the rotor-bearing-frame system in a variable-speed scroll compressor

Investigation of the unsteady characteristic in a scroll compressor of a heat pump system for electric vehicles

Fast Algorithm of Single Frequency-Swept Interferometry for the Dynamic Axial Clearance Measurement of High-Speed Rotating Machinery.

Thermal Analysis Model of Scroll Compressor with Clearance Leakage Based on Multiple Scale Method

Investigation of Different Rotational Speed Characteristics of Multistage Axial Compressor in CAES System

Development of a PVDF Sensor Array for Measurement of the Dynamic Pressure Field of the Blade Tip in an Axial Flow Compressor

Simulation and Experiment Research on Wide Ranging Working Process of Scroll Expander Driven by Compressed Air

Effect of differential tip clearance on the performance and noise of an axial compressor