Abstract:The present study investigated the spectrum characteristics of unsteady disturbance and the tip leakage vortex evolution during pre-stall process for a contra-rotating axial compressor (CRAC). Transient numerical simulation was carried out in a single passage of the CRAC. The original transient fluctuation and oscillation of the tip leakage vortex structure with varying flow capacity of the CRAC were revealed using circle-like pattern figure and phase-locked root mean square (PLRMS). Additionally, the tip leakage flow in terms of vortex structure evolution was visualized for the sake of revealing the flow mechanism during pre-stall process. Results show that the unsteady fluctuation first appears at φ=0.3622, and the fluctuation frequency is 2.86 BPF. Unsteady disturbance source is mainly located at the tip side of the downstream rotor leading edge. From the choking point to the near stall condition, tip leakage vortex is always found in the tip leading edge of the upstream rotor. In addition, the tip leakage vortex of upstream rotor remains in the same place over time, i.e., no fluctuation, even when the downstream rotor entered into stall state. Such a phenomenon indicates that the stall point of the contra-rotating compressor is determined by the downstream rotor. Moreover, the maximum fluctuation position is mainly concentrated on the interface between the mainstream and the tip leakage vortex of the downstream rotor. By throttling the compressor, the angle between the main leakage vortex and the circumferential direction decreases gradually. When the main leakage vortex touches and continuously impacts on the leading edge of the adjacent blade, the unsteady disturbance, which is different from that of BPF, appears firstly.

EXPERIMENTAL INVESTIGATION OF THE UNSTEADY TIP CLEARANCE FLOW IN A LOW SPEED AXIAL CONTRA-ROTATING COMPRESSOR

Investigation of the Unsteady Disturbance in Tip Region of a Contra-Rotating Compressor Near Stall

Experimental Investigation of Flow Characteristic of Tip Leakage Flow in an Axial Flow Compressor Rotor

Experimental Investigation of Unsteady Tip Clearance Flow in A Counter Rotating Fan

Study of Transient Tip Leakage Vortex Characteristics in a Contra-Rotating Compressor

Experimental Investigation of Rotating Instability in a Contra-Rotating Axial Flow Compressor

Investigations of Rotating Instability and Fluctuating Tip Clearance Flow in a Low-Speed Axial Compressor

Experimental and Numerical Investigation of Near-Tip Flow-Field in an Axial Flow Compressor Rotor-Part Ⅱ: Flow Characteristics at Near-Stall Operating Conditions

Numerical Investigation into the Mechanism Regarding the Inception and Evolution of Flow Unsteadiness Induced by the Tip Leakage Flow in a Transonic Compressor

Study on Unsteady Flow Characteristic in a Transonic Axial Compressor Rotor at Near Stall Condition

Investigation of Vortex Structures Near Tip Region in a Transonic Axial Flow Compressor Rotor

The Investigation on Vortex Breakdown Prior to Stall in a Compressor Rotor with Non-Uniform Tip Clearance

Periodic Unsteadiness of Tip Clearance Vortex in an Axial Compressor Rotor

Numerical Investigations into the Origin of Tip Unsteadiness in a Transonic Compressor

Numerical Investigation into Unsteady Flow and Its Associated Flow Mechanism in a Transonic Compressor Rotor at Near Stall Conditions

Experimental Detection of Rotating Instability and Exploration of Its Flow Mechanism in an Axial Flow Compressor Rotor

Influence of Different Rotor Speeds on the Unsteady Flow Near Tip Region in a Subsonic Axial Flow Compressor Rotor

Experimental Study on Time-Frequency Characteristics of Rotating Instability in an Isolated Axial Compressor Rotor with Variable Clearance

Experimental Study of Pre-Stall Pressure Disturbances in a Low-Speed Axial Compressor

Numerical investigation of tip clearance effects on rotating instability of a low-speed compressor

Investigation of Rotating Instability Characteristics in an Axial Compressor with Different Tip Clearances