Abstract:Natural rubber is a widely used elastomer for the preparation of cyclically mechanically loaded products such as tires, where it reduces self-heating behavior. From a material point of view, the degree of self-heating depends on the composition of the rubber compound. One of the parameters influencing the self-heating of rubber is the type of curing system, which leads to different crosslinking density. The crosslinking density value for carbon black filled rubbers is only apparent due to the its physical interactions present and is referred to as the apparent crosslinking density (aCLD).Therefore, this work focuses on investigating the effect of sulfur intermolecular network formation by conventional (CV), semi-efficient (SEV) and efficient (EV) curing systems on the temperature development of cyclically loaded rubber using an advanced test method to in-situ determine the heat build-up. Rubber samples based on different curing systems were prepared by varying the concentration of the accelerator N-Tertiarybutyl-2-benzothiazole sulfenamide (TBBS) at a constant concentration of sulfur (2.5 phr). Using basic mechanical tests, it was found that the stiffness and hardness of the rubber increased with increasing aCLD and decreasing proportion of poly-sulfide bonds, respectively. Furthermore, cyclic mechanical analysis showed that with increasing aCLD and parallel decrease in the proportion of poly-sulfide bonds, both the loss modulus ( G'' ) and dissipated strain energy increased, which was also reflected in the values of the mechanical stress-induced self-heating gradient. From the values of maximum developed temperatures, it was evident that the group of material with CV curing system showed the lowest self-heat build-up.

Effect of high-temperature curing on the crosslink structures and dynamic mechanical properties of gum and N330-filled natural rubber vulcanizates

Effect of Crosslink Structures on Dynamic Mechanical Properties of Natural Rubber Vulcanizates under Different Aging Conditions

Effect of Crosslink Structure on Mechanical Properties of Natural Rubber Vulcanizate under Different Aging Conditions

The Effect of Apparent Density of Sulfidic Crosslink and Their Chemical Nature on Self-heat Build-up in Carbon Black Filled Natural Rubber under Cyclic Mechanical Loading

Microstructure Evolution and Strain Softening of Carbon Black Filled Natural Rubber Vulcanizates

Influence of Different Curing Systems on Static and Dynamic Properties of NR Vulcanizates

Thermo-oxidative degradation behavior of natural rubber vulcanized by different curing systems

Effects of Glass Bead and Carbon Black on Curing Characteristics of EPDM Rubbers

Influence of amount of sulfur on crosslinking density and structure of natural rubber characterized by nuclear magnetic resonance spectroscopy

Curing kinetics and mechanical behavior of natural rubber reinforced with pretreated carbon nanotubes

Dramatic influence of curing temperature on micro-nano structure transform of HNBR filled with zinc dimethacrylate

Effect of Curing Systems on Vulcanization, Mechanical Properties, and Stress Softening of Hydrogenated Nitrile Butadiene Rubber Vulcanizates

Effect of Curing Systems on Properties of Chlorinated Butyl Rubber/nylon 12 Dynamic Vulcanizates

Effect of Grafted Carbon Black on Properties of Vulcanized Natural Rubber

Effects of Peroxide and Sulfur Curing Systems on Physical and Mechanical Properties of Nitrile Rubber Composites: A Comparative Study

Effects of Filler–rubber Interaction on Dynamic Mechanical Properties and Reinforcement of NR Vulcanisates

Effect of Compound Curing Systems on Morphology and Properties of Fluororubber/Silicone Rubber Blends

Effect of curatives and fillers on vulcanization, mechanical, heat aging, and dynamic properties of silicone rubber and fluororubber blends

Effect Of Vulcanization Systems And Crosslink Density On Tensile Properties And Network Structures Of Natural Rubber

The Effect of High Loaded Multiwall Carbon Nanotubes in Natural Rubber and Their Nonlinear Material Constants

Simulation and Verification for Sulfur Accelerated Vulcanization of Gum Natural Rubber Compound