Abstract:The effects of crosslink structures on the dynamic mechanical properties (DMPs) of unfilled and carbon black N330-filled natural rubber (NR) vulcanizates cured with conventional(CV), semiefficient (SEV), and efficient (EV) cure systems and having about the same total crosslink densities were investigated before and after aerobic and anaerobic aging at 100 degreesC. The three unfilled NR vulcanizates cured with the CV, SEV, and EV systems had about the same mechanical loss factor (tan delta) values at about 0 degreesC but showed some apparent differences in the tan delta values in the order EV > SEV > CV at relatively high temperatures of 40-80 degreesC before aging. However, N330-filled NR vulcanizates gave higher tan delta values than the unfilled vulcanizates and showed little effect of the crosslink types on the tan delta at different temperatures over the glass-transition temperature (T-g) before aging. Aerobic heat aging increased the T-g and tan delta values of the vulcanizates over a wide range of temperatures from -80 to 90 degreesC that was mainly due to the changes in the total density and types of crosslinks. The unfilled vulcanizates cured with the CV system showed the greatest change in DMP because of their poor resistance to heat aging. Aerobic heat aging of NR vulcanizates caused a more significant change in the DMP than anaerobic heat aging because of the dominant effect of the oxidative degradation during aerobic heat aging on the main-chain structure, crosslink structures, and DMPs of the vulcanizates. (C) 2001 John Wiley & Sons, Inc.

Effect of Curing Systems on Vulcanization, Mechanical Properties, and Stress Softening of Hydrogenated Nitrile Butadiene Rubber Vulcanizates

Effects of Peroxide and Sulfur Curing Systems on Physical and Mechanical Properties of Nitrile Rubber Composites: A Comparative Study

Effect of Different Curing Systems on Cell Structure, Mechanical Properties and Aging Resistance of Nitrile Butadiene Rubber Foam Coating with Liquid Compounds

Cure Characteristics and Mechanical Properties of Styrene-Butadiene Rubber/hydrogenated Acrylonitrile-Butadiene Rubber/silica Composites

Influence of Prolonging Vulcanization on the Structure and Properties of Hard Rubber

Effects of Curing Systems on the Properties of CR/SBR Vulcanizates

Effect of Combinated Curing Systems on Properties of ACM/NBR Blends

Effect of the Curing Systems on Mechanical Behaviour of Natural Rubber Composites

Effect of Crosslink Structure on Mechanical Properties of Natural Rubber Vulcanizate under Different Aging Conditions

Effect of Crosslink Structures on Dynamic Mechanical Properties of Natural Rubber Vulcanizates under Different Aging Conditions

Research on Mechanical Properties, Compatibility, Flame Retardancy, Hot-Air Ageing Resistance of Hydrogenated Nitrile-Butadiene Rubber/Chloroprene Rubber Blends

Effect of high-temperature curing on the crosslink structures and dynamic mechanical properties of gum and N330-filled natural rubber vulcanizates

Effect Of Vulcanization Systems And Crosslink Density On Tensile Properties And Network Structures Of Natural Rubber

Influence of Curing Systems on Properties of HNBR/CR Blend

Energy Dissipation Accompanying Mullins Effect of Nitrile Butadiene Rubber/carbon Black Nanocomposites

Microstructure Evolution and Strain Softening of Carbon Black Filled Natural Rubber Vulcanizates

Effect of the cure system on aging resistance of natural rubber compounds

Relationship between structure and damping property of hydrogenated nitrile rubber

Inhomogeneities of Sulfidic Linkages and Mullins Effect in Isoprene Rubber Vulcanizates Vulcanized with Sulfur Donor Agents

Study of the Crosslinking Evolution of Styrene-Butadiene Rubber/Zinc Dimethacrylate Based on Dissolution/Swelling Experiments

Scaling Laws of Mullins Effect in Nitrile Butadiene Rubber Nanocomposites