Abstract:An independent metering valve control hydraulic system (IMVCHS) adopts two independent valves to separately control the meter-in and meter-out orifices. This structure increases the degree of freedom of the control, and improves its flexibility and energy-saving performance. In this study, an IMVCHS was established that applies a control system developed to research the pressure and flow compound control performance. A two-level fuzzy control algorithm based on the calculated flow rate feedback from the spool displacement was proposed to realize high precision flow control, and the two-level fuzzy control algorithm based on the pressure feedback was also adopted to enhance the pressure performance under a dynamic load. A simulation model was established, and its key parameters identified experimentally using the simulated load of a hydraulic bridge circuit. The experimental results show that the proposed flow controller has higher control accuracy with an error of less than 2%, and the flow adjustment time for 40 L/min step control is 320 ms. The pressure controller with a two-level closed-loop fuzzy algorithm can significantly improve these pressure dynamic and static performances, and achieve a step response time of less than 180 ms. Combining the pressure and flow controllers, the pressure and flow compound control of the IMVCHS is realized, and the capacity for coping with load fluctuations is also identified, with compound adjustment times of generally less than 200 ms, and occasionally less than 100 ms. This control system therefore achieves a good performance for pressure and flow compound control, and is able to widen the application of independent metering control technology.

Optimum of flow passage in directional control valves based on flow simulation

Study on Water Hydraulic Directional Valve with Plane Piston Structure

Optimum design of piloted large flow and high speed onoff valve

Simulation of Precision Flow Control System Based on MATLAB/Simulink

Model And Optimal Design Of Pneumatic High-Speed On/Off Valve

Research on the Optimal Design of a Pilot Valve Controlling Cut-Off Valve

Simulation and Experimental Investigation on Pressure Dynamics of Pneumatic High-Speed On/off Valves

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

Numerical Simulation of Inlet and Outlet Passages for Axial Flow Pump in Drainage Pump Station

Analysis of Pressure and Flow Compound Control Characteristics of an Independent Metering Hydraulic System Based on a Two-Level Fuzzy Controller

Flow Characteristics and Structure Optimization of a Ball-type Control Valve

Flow Rate Adjustable Ratio Analysis of a Novel Control Valve with Double Sleeve

Transient Simulation of Valve Core Movement of Pilot-Control Globe Valve in Vertical Pipelines

Design of Pilot-Assisted Load Control Valve for Proportional Flow Control and Fast Opening Performance Based on Dynamics Modeling

Optimization of Valve Block Shape Using CFD

Optimization on the Topological Coupling-Throttling Structures for Directional Valves

Three-dimensional Numerical Analysis on a New Design of Hydraulic Structure for Water Treatment

Numerical and Experimental Investigation on Opening Direction Steady Axial Flow Force Compensation of Converged Flow Cartridge Proportional Valve

Modeling and Dynamic Characteristics Analysis on a Three-Stage Fast-Response and Large-Flow Directional Valve

Design of Pilot-Assisted Load Control Valve with Load Velocity Control Ability and Fast Opening Feature

Simulation analysis and optimization of pilot type electro-hydraulic proportional directional valve based on multi field coupling