Abstract:Dynamic performance is an important index of high-speed on/off valve in the digital hydraulic field. Optimizing the control algorithm is an effective method to improve the dynamic performance of existing high-speed on/off valves. Usually, a high-voltage excitation method is used to realize fast switching of the high-speed on/off valve, but this also leads to a high temperature rise, large energy consumption, and long delay times when switching off. In this article, an intelligent pulse-width modulation control algorithm is proposed to improve dynamic performance while minimizing temperature rise and energy consumption of high-speed on/off valves. A high-frequency voltage source with full positive, low positive, full negative, and zero duty ratios is applied to drive the high-speed on/off valve in opening, maintaining opened, closing and maintaining closed states, respectively. The adaptive switching of these four duty ratios is realized by real-time current feedback which can estimate the operational state of the high-speed on/off valve, so that the current in the loop is always in the optimal state. A mathematical model of the high-speed on/off valve is built, and based on it, the theoretical formulas for the delay time, temperature rise, and energy consumption of the high-speed on/off valve are deduced. Simulation results indicate that the intelligent pulse-width modulation control algorithm has a better performance in dynamic characteristics than normal high-voltage excitation methods. Moreover, experimental results from a test system indicate that the intelligent pulse-width modulation control has the potential to shorten the opening time by 23.6% and closing time by 17.0%, which confirms the simulation results. Results also showed the ability to extend the controllable working duty ratio by 83.3%, to reduce temperature rise by 69.9%, and reduce energy consumption by 88.8% when compared to the matched controller of the tested high-speed on/off valve. This article presents an effective and practical method to improve the performance of high-speed on/off valves.

Modeling and Dynamic Characteristics Analysis on a Three-Stage Fast-Response and Large-Flow Directional Valve

Dynamic characteristics of pilot-operated electro-hydraulic flow distribution system

Simulation and Experimental Investigation on Pressure Dynamics of Pneumatic High-Speed On/off Valves

Study on ultrahigh pressure and large flow rate pneumatic on-off valve

Research on Dynamic Characteristics of the Rotary Valve.

Development of In-out-burst Pneumatic On/off Valve

Research and Development of A Test System for the Dynamic Performance Testing of Pneumatic Solenoid Valves

Modeling and Characteristics Investigation on a Load Control Valve

Design, Modeling and Simulation of an Innovation Pneumatic High Speed On-off Valve Based on Giant Magnetostrictive Material

Hydraulic-feedback Proportional Valve Design for Construction Machinery

Optimum design of piloted large flow and high speed onoff valve

Modeling and Analysis of Hydraulic Controlled Rotary Valve Excitation System

Simulation and Experiment on Static Characteristic of Water Hydraulic Proportional Pressure Relief Valve

Dynamic Design and Simulation of Proportional Directional Valve with Displacement Feedback Based on the Moving Valve Sleeve

Research on New Type of Fast-Opening Mechanism in Steam Turbine Regulating System and Optimization of Operation Tactic

Modeling and characteristics investigation on a new pneumatic proportional pressure valve

Study on Control Performance of Pilot High-Speed Switching Valve

Design of Pilot-Assisted Load Control Valve for Proportional Flow Control and Fast Opening Performance Based on Dynamics Modeling

Design of Pilot-Assisted Load Control Valve with Load Velocity Control Ability and Fast Opening Feature

Performance Analysis of a High-Speed On/off Valve Based on an Intelligent Pulse-Width Modulation Control

Modeling and Dynamic Characteristics of a Novel High-Pressure and Large-Flow Water Hydraulic Proportional Valve