Abstract:Many hydraulic tools, like hydraulic cylinders and hydraulic artificial muscle joints are operated by adjusting pressure differences between different zones. Typically, the method employed to change the pressure difference is establishing hydraulic bridges and adjusting liquid resistance. While effective, this method's drawback is complex structures. To address this issue, a water-hydraulic pressure difference control valve, integrating two hydraulic bridges, was designed. The static performances including the output pressure difference, the flow rate and the force acting on the valve core were analyzed using AMESim and computational fluid dynamics simulations. Based on the simulation results, a prototype of voice coil motor direct drive pressure difference control valve was manufactured and the corresponding experiments were carried out. The computational fluid dynamics simulation results show that the internal leakage and the through-flow capacity difference between throttling grooves affect the flow field characteristics of the valve. When the pump pressure is 3 MPa and the valve opening is at the middle position, the internal leakage increases the flow rate from 2.25 L/min to 2.38 L/min, and the through-flow capacity difference reduces the control port pressure from the theoretical analysis of 1.5 MPa to 1.41 MPa. Furthermore, combined with the analysis of the external liquid resistance, the AMESim model of the pressure difference control valve is modified. When the pump pressure is 3 MPa, the pressure difference and flow rate average deviations between the modified AMESim model and the experiment are 0.021 MPa and 0.048 L /min. Finally, a rotational angle experiment for a water hydraulic artificial muscle joints showed satisfactory control effects, suggesting the valve's application in controlling hydraulic tools and actuators.

CFD simulation of flow-pressure characteristics of a pressure control valve for automotive fuel supply system

CFD Simulation of Dynamic Characteristics of a Solenoid Valve for Exhaust Gas Turbocharger System

Pressure Control of the Proportional Directional Control Valve Test Rig Based on the Fuzzy Proportional-Integral-Double-Integral Controller

The CFD Analysis of Cavitation Erosion and Structural Optimization for an Unloading Valve

Study on Flow Field in Capacity Regulating Actuator for Reciprocating Compressor

Simulation and Experimental Investigation on Pressure Dynamics of Pneumatic High-Speed On/off Valves

Optimization of Nonlinear Pressure-Flow Characteristics of a Spring-Loaded Pressure Relief Valve Based on Computational Fluid Dynamics Simulation

Simulation Of Controllable Pressure-Clearance Characteristic Of A High Pressure Pneumatic Chamber

Simulation and Experiment on Static Characteristic of Water Hydraulic Proportional Pressure Relief Valve

Characteristics Numerical Analysis for Open and Close Feature of a Pilot-controlling Cut-off Valve Based on UDFs Program

Steady Flow Torques in a Servo Motor Operated Rotary Directional Control Valve

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

CFD Analysis on the Dynamic Flow Characteristics of the Pilot-Control Globe Valve

CFD Analysis for Dynamic Property of a Pilot-Operated Cut-Off Valve in Vertical Pipeline

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

Numerical and Experimental Investigation on Opening Direction Steady Axial Flow Force Compensation of Converged Flow Cartridge Proportional Valve

Flow Field Analysis of Hydraulic Multi-way Valve Based on CFD

Realization of direct flow control with load pressure compensation on a load control valve applied in overrunning load hydraulic systems

Research on the Optimal Design of a Pilot Valve Controlling Cut-Off Valve

Research on Back- Pressure Compensation Characteristics of a Pilot-Assisted Load Control Valve Applied in Overrunning Load Hydraulic Systems

Simulation Analysis and Experimental Research on Static Performance of Water-hydraulic Pressure Difference Control Valve