Abstract:Cobalt-free lithium-rich layered manganese-based oxides (LLMOs) are expected to become the next generation cathode materials for lithium-ion batteries due to its high capacity and low cost [1] . In this study, a series of cobalt-free high-nickel lithium-rich layered cathode materials Li 1.5-3 x Al x Mn 0.55 Ni 0.45 O 2.5 (LLMO-Al x , x = 0, 0.025, 0.075 and 0.1) with excellent electrochemical performance were synthesized through a simple calcination process of LLMO precursor with nano-alumina particles and non-stoichiometric amounts of lithium salts. The cross-sectional SEM measurement of as-prepared samples shows that a unique micro-porous structure is formed in Al-dopped LLMOs and maintained even after 200 cycles of charge-discharge process at 1C rate, whereas the original LLMO with compact structure breaks into particles at the same cyclability test condition. The stability and reversibility of the lattice oxygen and oxygen vacancies in Al-dopped LLMOs which attributed to the stronger Al-O bonding are indicated by the ex-situ XPS spectrum analysis of O 1s spectrum in the different states of charge/discharge test, and first principles calculations show that Al doping significantly affects the local transition metals coordination circumstance. As a result of enhanced mechanical and electrochemical stability, the optimized LLMO-Al 0.075 cathode material has a discharge capacity of 353.8 mAh g −1 at 0.1C, a capacity retention of more than 92.9% after 200 cycles at 1C, and improved cycling and voltage stability. This work provides a promising inspiration for the rational design of porous structure in LLMOs to enhance the mechanical stability and electrochemical performance of cobalt-free lithium-rich layered cathode materials.

Aluminum-Doped Lithium Nickel Cobalt Oxide Electrodes for High-Power Lithium-Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level

Aluminum-doping-based Method for the Improvement of the Cycle Life of Cobalt–nickel Hydroxides for Nickel–zinc Batteries

An In-Depth Understanding of the Effect of Aluminum Doping in High-Nickel Cathodes for Lithium-Ion Batteries

Improving the Cycle Stability of LiNiO2 through Al3+ Doping and LiAlO2 Coating

Stabilizing Ni‐Rich LiNi 0.92 Co 0.06 Al 0.02 O 2 Cathodes by Boracic Polyanion and Tungsten Cation Co‐Doping for High‐Energy Lithium‐Ion Batteries

Enhanced electrochemical performance of Ni-rich cathode material by N-doped LiAlO2 surface modification for lithium-ion batteries

Effects Of Aluminum Doping On Cobalt-Free Lithium-Iron-Nickel-Manganese-Oxygen Cathode Materials For Lithium-Ion Batteries

High-rate Performance of LiNi0.5Mn1.45Al0.05O4 Cathode Material for Lithium-Ion Batteries

Tuning Dopant Distribution for Stabilizing the Surface of High‐Nickel Layered Oxide Cathodes for Lithium‐Ion Batteries

Improving High-Capacity Li1.2Ni0.15Mn0.55Co0.1O2-based Lithium-Ion Cells by Modifiying the Positive Electrode with Alumina

Optimized Al Doping Improves Both Interphase Stability and Bulk Structural Integrity of Ni-Rich NMC Cathode Materials

LiNi0.8Co0.15Al0.05O2 Cathodes Exhibiting Improved Capacity Retention and Thermal Stability Due to a Lithium Iron Phosphate Coating

Optimized Ni-rich LiNi0.83Co0.06Mn0.06Al0.05O2 cathode material with a Li1.3Al0.3Ti1.7(PO4)3 fast ion conductor coating for Lithium-ion batteries

Enhancing the Electrochemical Performance of Ni-Rich LiNi0.88Co0.09Al0.03O2 Cathodes through Tungsten-Doping for Lithium-Ion Batteries

Aluminum-doping induced micro-porous structure and improved anion redox reversibility in cobalt-free lithium-rich cathode materials for its enhanced electrochemical performance

Enhanced high performance of aluminum/indium Co-doped lithium nickel manganese cobalt oxide for possible batteries application

Role of Al-doping with Different Sites Upon the Structure and Electrochemical Performance of Spherical LiNi0.5Mn1.5O4 Cathode Materials for Lithium-Ion Batteries

High Energy Density Lithium Ion Batteries Using Li2.6Co0.4−xCuxN (anode) and Cu0.04V2O5 (cathode) Electrode Materials

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability