Abstract:Lithium-rich transition metal oxides are considered a promising cathodic solutions in Li-ion batteries to meet the growing energetic demand, thanks to their high specific capacity and operational voltage [1-2]. Li-rich layered materials have a general stoichiometry Li1+xTM1-xO2, in which TM is a blend of transition metals, as Ni, Mn, Co [2]. They stand out due to their high lithium concentration and specific capacity [1-2]. The higher capacity of Lithium-Rich can be attributed to the specific anionic redox reaction in the bulk at above 4.5 V. Nevertheless, large irreversible capacity loss in the first cycle, poor rate capability, mean working potential decay upon cycling and cobalt content are still major drawbacks that are hindering commercialization. In order to make these materials up scalable to industrial production, it is important to consider the reduction of costs and the toxicity of raw materials, in particular cobalt. Cobalt reduction has been identified as major driver to improve the environmental benignity of batteries and the sustainability of the overall production-consumption-recycling lifecycle. Several efforts to reduce these problems have been made, including the development of different synthetic strategies, doping and surface modification. The most, widely explored, chemical strategy to mitigate the voltage decay and structural degradation in Lithium Rich cathodes is the doping. Elemental doping can be divided into cation and anion doping. As an example, incorporation of redox inactive metals, such as Al, Zr, Ti, has been proposed in order to stabilize the lattice as well as the partial replacement of lithium ions with other alkali cations, e.g. K and Na; or doping the oxygen anion sublattice. In this communication, we present our doping approaches. In particular, the simultaneous replacement of cobalt in the layered structure with aluminum and lithium (over-lithiation). Moreover, we present over-lithiated Co-free materials where the introduction of different amount of iron has been investigated. The characterization of these novel layered materials is reported in terms of composition, structure, morphology and electrochemical performances. These approaches can be applied as a strategy to mitigate the voltage decay and reduce the Cobalt content. [1] Ji, X. et al. Journal of Power Sources 487, (2021). [2] Zhao, S. et al. Angewandte Chemie - International Edition 60, 2208–2220 (2021).

Aluminum-doping induced micro-porous structure and improved anion redox reversibility in cobalt-free lithium-rich cathode materials for its enhanced electrochemical performance

Improved Cycling Performance of Cation-Disordered Rock-Salt Li1.2Ti0.4Mn0.4O2 Cathode through Mo-Doping and Al2O3-Coating

Phase Engineering via Aluminum Doping Enhances the Electrochemical Stability of Lithium‐Rich Cobalt‐Free Layered Oxides for Lithium‐Ion Batteries

Cobalt-free nickel-rich cathode materials based on Al/Mg co-doping of LiNiO2 for lithium ion battery

Effects Of Aluminum Doping On Cobalt-Free Lithium-Iron-Nickel-Manganese-Oxygen Cathode Materials For Lithium-Ion Batteries

Modulating the local electronic structure via Al substitution to enhance the electrochemical performance of Li-rich Mn-based cathode materials

Aluminum and polyanion-doping to improve structural and moisture stability of Ni-rich layered oxides for lithium-ion batteries

Molybdenum‐Doped Cobalt‐Free Cathode Realizing the Electrochemical Stability by Enhanced Covalent Bonding

Aluminum doping and lithium tungstate surface coating double effect to improve the cycle stability of lithium-rich manganese-based cathode materials

Surface Al-doping for compromise between facilitating oxygen redox and enhancing structural stability of Li-rich layered oxide

Achieving high structure and voltage stability in cobalt-free Li-rich layered oxide cathodes via selective dual-cation doping

Fluorine Doping and Al2O3 Coating Co-modified Li[Li0.20Ni0.133Co0.133Mn0.534]O2 As High Performance Cathode Material for Lithium-Ion Batteries

Multifunctional surface structure with enhanced electron and ion conductivities for superior electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes

Strengthening Reversibility at High Rate of Spinel LiMn2O4 by Aluminum and Copper Co-doping for Lithium Ion Battery

Strengthening Reversibility at High Rate of Spinel LiMn 2 O 4 by Aluminum and Copper Co-doping for Lithium Ion Battery

Enhanced cyclic performance of O2-type Mn-based layered oxide via Al doping for lithium-ion battery

Doping Strategy to Improve the Electrochemical Behavior of Lithium Rich Transition Metal Oxides As Cathodes for Lithium-Ion Batteries

Role of Al-doping with Different Sites Upon the Structure and Electrochemical Performance of Spherical LiNi0.5Mn1.5O4 Cathode Materials for Lithium-Ion Batteries

Enhanced Cathode Performance: Mixed Al 2 O 3 and LiAlO 2 Coating of Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2

Cation and anion Co-doping synergy to improve structural stability of Li-and Mn-rich layered cathode materials for lithium-ion batteries

Buliding Ultrathin Li4mn5o12 Shell for Enhancing the Stability of Cobalt-Free Lithium-Rich Manganese Cathode Materials